0045242222568

Milwaukee

Model 49-56-9633

Internet #202327754

Store SKU #228950

2-5/8 in. Hole Dozer Hole Saw

$13.67 /each
  • Rip Guard, the strongest tooth form in the industry
  • 8% cobalt construction for increased wear resistance
  • Plug Jack, an all access slot design for fast plug removal

Frequently Bought Together

Product Overview

Made in the USA, the Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100.

  • Rip Guard, the strongest tooth form in the industry
  • Rip Guard Limited Lifetime Tooth Break Warranty
  • Plug Jack, an all access slot design for fast plug removal
  • Bi-metal construction with 8% cobalt for increased wear resistance

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

55 Questions103 Answers

Customer Questions & Answers

2-5/8 in. Hole Dozer Hole Saw
2-5/8 in. Hole Dozer Hole Saw

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 6 in. Hole Dozer Hole Saw
 
2 answers

can i use this on metal hvac duct

This question is from 6 in. Hole Dozer Hole Saw
Asked by
Read all my Q&A
May 2, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 3, 2016
Answer: 
Yes, this hole saw is made for cutting metal.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

May 3, 2016
Answer: 
Yes. You can use this saw on Metal HVAC duct.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from 4-1/2 in. Hole Dozer Hole Saw
 
1 answer

With enough cutting oil or wax, will this bit cut through 1/2" steel?

This question is from 4-1/2 in. Hole Dozer Hole Saw
Asked by
Read all my Q&A
April 5, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 21, 2016
Answer: 
Yes, the Hole Dozer can cut through thick steel, even I-beams. For thick steel low RPM with generous cutting fluid/wax is recommended.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 3-1/2 in. Hole Dozer Hole Saw
 
2 answers

This doesn't fit my power drill. What adapter bit do I need to purchase

This question is from 3-1/2 in. Hole Dozer Hole Saw
Asked by
Read all my Q&A
March 6, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Linden, MI
Read all my Q&A
August 2, 2016
Answer: 
I have a Makita hole saw set, and actually used the adapter from that set, so it worked out perfectly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Other
March 7, 2016
Answer: 
Hi Geo, here is a list of the Milwaukee quick arbors that work with this hole saw.
Just make sure you match up the arbor that works with your drill chuck size.
For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 4 in. Bi-Metal Hole Saw
 
1 answer

Cutting thru Clear Extruded Acrylic Plexiglass Sheet

This question is from 4 in. Bi-Metal Hole Saw
Asked by
Lake Orion, MI
Read all my Q&A
February 28, 2016
Can I use this hole saw in drill press to cut thru Clear Extruded Acrylic Plexiglass Sheet 3/8 inch thick?
If yes, then what speed is recommended, 600 RPM or lower? Should I use any fluids to reduce generated heat? Thanks, Max
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Dothan,Al.
Read all my Q&A
July 15, 2016
Answer: 
Yes it will but take it slow so not to crack the material. Some persons run the drill in reverse after the center bit is through to cut without digging into the material, the more teeth you have on a bit (finer cut blade) is what you need to cut such materials.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 »
  • 2016-08-24 T14:32:25.715-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202327754, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 232 reviewers.
Rated 4.0 out of 5.0 by Did the job I needed this hole saw to make a hole through the side of a basement wall in order to run a PVC drain pipe through it. The saw was very sharp and cut the hole through the wall and siding with ease. My only complaint is that it didn't come with the arbor, but I had one from a smaller, less expensive, hole saw that I was able to make work. April 5, 2016
Rated 5.0 out of 5.0 by Great buy Another great Milwaukee product as I expected. Very happy. March 15, 2016
Rated 3.0 out of 5.0 by Doesn't cut through metal I bought this to cut through a 20ga steel sheet for an enclosure, but it didn't work at all. Had to buy a step drill to get the job done. Also tried this on thin stucco. It got through, but the bit was completely burnt out doing so. The packaging didn't say you could use for stucco, but I thought I would mention it in case anyone was wondering how it would perform. Don't recommend this product for metal or stucco use. This did work great with wood. August 16, 2016
Rated 4.0 out of 5.0 by When you need a 2 3/4 hole drill nothing else will do! Too expensive for what you get! A 2 3/4 hole saw is rarely needed. The cost of this product is way to high for what you get. August 16, 2016
Rated 5.0 out of 5.0 by Best product I always buy Milwaukee brand tools I feel they are the best in the market.... August 23, 2016
Rated 1.0 out of 5.0 by Lasted less than a week Bought to cut holes in thin metal this tool only made 6 holes before being completely rounded out and unusable. The only thing worse than this product was the terrible customer service. Do yourself a favor a buy a nicer tool. I will not be buying another Milwaukee tool because of the poor quality and horrendous customer service. August 16, 2016
Rated 1.0 out of 5.0 by poor performance, drilled one hole in sheet metal and blade is dull when drilling the sheet metal which was only .032" thick the center bit wobbled and the hole drill started to orbit, had to exert a lot of pressure to cut. When the hole was finished the hole drill was completely dull and the drilled hole was undersized. Had to use half round files to finish hole. August 16, 2016
Rated 5.0 out of 5.0 by Great Bore I used this to bore holes forinsulation. Make sure to use a drill larger than the standard 3/8! I burned the motor out in mine :( August 16, 2016
  • 2016-08-26 T14:11:23.754-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_232, tr_232
  • loc_en_US, sid_202327754, prod, sort_default
2 3 4 5  ... 9 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT