Model # 49-56-9637

Internet #202327756

Store SKU #229544

Milwaukee 3 in. Hole Dozer Hole Saw
0045242198528

Milwaukee

3 in. Hole Dozer Hole Saw

  • Rip Guard, the strongest tooth form in the industry
  • 8% cobalt construction for increased wear resistance
  • Plug Jack, an all access slot design for fast plug removal
$14.37 /each

Frequently Bought Together

Product Overview

Bi-metal tooth construction on the Milwaukee 3 in. Hole Dozer Hole Saw features a robust composition of steel and 8% cobalt that is backed by a Rip Guard lifetime limited warranty against breakage for ultimate cutting performance and confidence. This hole saw drill attachment is fashioned with innovative Plug Jack diagonal slots for easy removal of plugged material, allowing work to proceed at a steady clip.

  • Durable bi-metal construction features 8% cobalt for increased wear resistance
  • Steel-reinforced teeth are covered by a lifetime limited Rip Guard warranty against breakage
  • Fashioned with all-access diagonal plug jack slots for fast removal of plugged material
  • Use with separately sold Milwaukee quick-change arbors (models 49-56-7210, 49-56-7240, 49-56-7250, 49-56-9100)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can it saw cement ?

Asked by: tony
No I wouldn't think so.
Answered by: Doc
Date published: 2017-04-11

i need to drill through porcelin floor tile

Asked by: tony
No, would take a special saw for porcelin.
Answered by: Flash
Date published: 2017-03-07

Will this hole saw cut through 1/2" plywood? If not, what type hole saw will I need?

Asked by: Lar1
Yes it will cut through 1/2" plywood, but no more than 1-1/4".
Answered by: sawdust
Date published: 2016-08-01

Does the hole saw cut ceramic tile?

Asked by: Mags
no
Answered by: inspector
Date published: 2016-10-25
  • y_2017, m_4, d_24, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_64
  • loc_, sid_202327756, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • QUESTIONS, PRODUCT

Customer Reviews

3 in. Hole Dozer Hole Saw is rated 4.1 out of 5 by 397.
Rated 5 out of 5 by from The hole saw did what it was designed for I bored 10 holes in 3\4 thick cast iron plates with on... The hole saw did what it was designed for I bored 10 holes in 3\4 thick cast iron plates with only one hole saw I completed the job under the estimated time which equals profit They are good for those who know feeds and speed run them a slow rpm and they will last many jobs down the road
Date published: 2016-12-20
Rated 3 out of 5 by from not very happy with this one .. vey dull after drilling about 7 holes. but would still buy again... not very happy with this one .. vey dull after drilling about 7 holes. but would still buy again . most of the time they a great.
Date published: 2016-12-29
Rated 5 out of 5 by from Cuts through 1/4" plate steel with no problem. Made 20... Cuts through 1/4" plate steel with no problem. Made 20 hole cuts with no duling of the blade, so I give it an Excellent rating.
Date published: 2017-03-28
Rated 1 out of 5 by from This is a complete waste of money! I purchased this exact size from Harbor freight in a 3 pack wi... This is a complete waste of money! I purchased this exact size from Harbor freight in a 3 pack with variable sizes which is $10 less than this bit by itself. The generic bit made 5 recessed lighting holes with ease through lathe and plaster. I assumed if I spent a little more money it would get one that lasted longer and cut faster. I was completely wrong! This bit went dull after cutting two holes and I even pre-drilled the holes with the dull cheap bit to avoid the lathe from eating the teeth. I am sure this is good for cutting balsa wood at best.
Date published: 2017-03-03
Rated 5 out of 5 by from I used this with a quick change center drill bit arbor from Milwaukee and this was an excellent h... I used this with a quick change center drill bit arbor from Milwaukee and this was an excellent hole saw through my roof for a new attic fan vent. Makita 18V LXT 1/2 drill in higher torque mode was sufficient to cut through without flaw or trouble, maintaining light pressure and letting the saw do the work. A heavier duty drill would have provided even more torque, and with a handle mounted I think this saw would have drilled through quite rapidly. Excellent quality, excellent performance.
Date published: 2017-01-10
Rated 2 out of 5 by from Not good for metal! I recently got this hole saw to cut two holes through some stainless steel sheet metal. And I must say that I am VERY disappointed in its performance. These bimetal hole saws are sold as being capable of cutting through metal (including stainless steel), but it looks like they are fundamentally a woodworking tool that just cuts metal as an afterthought. I specifically tried cutting the steel at as close to the recommended 80RPM as my drill would allow and used plenty of cutting fluid. But it was slow going all the way. And the tool ended up becoming uselessly dull in the end. And at $13 a pop, that's pretty expensive for a tool that is not going to last. Granted, if you are into woodworking rather than metalworking, this hole saw will probably serve you well. It might even be OKAY if you use it to cut aluminum. But it is clearly not meant for cutting steel (and should not be sold as such).
Date published: 2017-03-12
Rated 4 out of 5 by from I have only used this hole saw to drill through maybe 5 2x4 plates and it seems to be doing ok. ... I have only used this hole saw to drill through maybe 5 2x4 plates and it seems to be doing ok. Not so for the 4" size I bought a several months ago; it was dull after cutting through a single pine rim joist. Not what I would expect from Milwaukee! I'm not a fan of yellow tools, but the dewalt hole saw I replaced it with was deeper and is holding up well.
Date published: 2017-01-18
Rated 5 out of 5 by from I used this hole saw to cut a hole in a communications steel panel and thru a house sill. The sa... I used this hole saw to cut a hole in a communications steel panel and thru a house sill. The saw cut right thru the steel panel without any trouble. The hole saw is deep enough to cut thru a 2 by 4 and released the cut 2 by 4 with a little push with screwdriver. I have only used it 3 times but I believe this is one of the better hole saws I have used.
Date published: 2017-03-08
  • y_2017, m_4, d_23, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_397
  • loc_, sid_202327756, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 26ms
  • REVIEWS, PRODUCT