Milwaukee 6 in. Bi-Metal Hole Saw-49-56-9656 - The Home Depot


Model # 49-56-9656

Internet # 202327766

Store SKU # 232910

6 in. Bi-Metal Hole Saw

Milwaukee 6 in. Bi-Metal Hole Saw

This item has been discontinued.
The Home Depot no longer carries this specific product.

$39.97 / each


Model # 49-56-9656

Internet # 202327766

Store SKU # 232910

Use the Milwaukee 6 in. Bi-Metal Hole Saw to cut holes in a variety of materials. The steel hole saw can drill almost 2 in. deep. Milwaukee ice hardened products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition.

  • 1/2 in. chuck size
  • High-speed steel construction
  • 3/4 in. diameter
  • 1-51/64 in. drilling depth


Drilling Depth (in)  1.8  Hole Saw Diameter  6 in 
Hole Saw Diameter (in) 
Arbor included  No  Bit Material  Bi-Metal 
Color Family  White  Drill & Router Bit Type  Hole Saws 
Drill Bit Type  Hole Saw  Drill Bit Type(s) Included  Hole Saw 
Individual/Set  Individual  Material Cut  Multi-Purpose 
Min Chuck Size Required  1/2 In.  Number of Pieces 
Pilot Bit Included  No  Power Tool Accessory Type  Other Accessory 
Power Tool Product Type  Drill & Router Bits  Returnable  90-Day 
Tools Product Type  Power Tool 


Rated 3.5 out of 5 by 12 reviewers.
Rated 1.0 out of 5.0 by Not Impressed at all This hole saw is complete garbage. I used it to cut 1 hole through a board and it is dull already! Worst $$$ I've spent on tools in a long time. Would never recommend or buy this product again! March 9, 2015
Rated 5.0 out of 5.0 by Works Great Bought to cut a perfect 6 inch hole for corn hole boards. It works perfectly and beats using a jig saw to cut the holes. Takes a bit to get used to the torque generated and have learned to slow down the cutting great! June 11, 2013
Rated 5.0 out of 5.0 by corn hole saw. Not much to this review but basic and simple product. Great for holes in corn hole boards. Would recomend. August 30, 2014
Rated 5.0 out of 5.0 by cut through plaster!! My ceilings are drywall on top of plaster with the wood lath behind it. This is the best and only way I know to get a perfect hole. I've tried cutting through layer by layer and it wasn't happening. Cut in 12 cans and still going strong. November 29, 2014
Rated 5.0 out of 5.0 by Cut good Used it to cut 12 holes into sheetmetal Did a good clean cut July 30, 2014
Rated 1.0 out of 5.0 by Went dull in the middle of cutting a hole. I bought this saw for installation of 6 inch duct for kitchen vent hood. In the middle of cutting the first and only hole, the saw became dull. I was hoping that it would last for at least the job, but it did not. I was using to cut mostly wood except for a thin aluminum siding. November 12, 2014
Rated 3.0 out of 5.0 by Mixed review The protective coating on outside of the saw could not be completely removed. It was almost like it was baked on. This created a lot of unnecessary drag on the saw. After several uses it got better but not as smoothe as it should have been. It got the job done but my drill was getting warm. October 29, 2014
Rated 1.0 out of 5.0 by Junk This blade is junk dulls too quick used once on wood and it is dull. September 23, 2014
  • 2015-04-18T11:24:55.254-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co-hasreviews, tv_12, tr_12
  • loc_en_US, sid_202327766, prod, sort_default
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.