Model # 49-56-9656

Internet #202327766

Store SKU #232910

Milwaukee 6 in. Hole Dozer Hole Saw
0045242198627

Milwaukee

6 in. Hole Dozer Hole Saw

  • Rip Guard, the strongest tooth form in the industry
  • 8% cobalt construction for increased wear resistance
  • Plug Jack, an all access slot design for fast plug removal
$3997 /each

Frequently Bought Together

Product Overview

The Milwaukee 6 in. Hole Dozer Hole Saw features Rip Guard teeth that were built with more steel behind the cutting edge for added strength. They give you increased productivity on the job site as well as better hole quality, and are backed by a limited lifetime tooth break warranty. The Hole Dozer comes with a Plug Jack, an all-access slot design that allows for full access during plug removal. The Plug Jack enables access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, the Plug Jack eliminates wasted downtime between holes. Pair this hole saw kit with universal quick-change arbors for fast, tool-free change-outs (model numbers 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100 - sold separately).

  • Features Rip Guard teeth with more steel behind the cutting edge for enhanced durability
  • Backed by a limited lifetime tooth break warranty
  • Equipped with plug jack, an all-access slot design for fast plug removal
  • Features bi-metal construction with 8% cobalt for increased wear resistance

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Cut through brick for dryer exhaust?

Trying to drill the exhaust hole for the dryer. Can I used this to drill through brick? its an old chicago building?
Asked by: steve
No. Use a masonry hole saw for something like this. Would probably be diamond-tipped.
Answered by: Sven
Date published: 2017-05-22

Can it saw cement ?

Asked by: tony
No I wouldn't think so.
Answered by: Doc
Date published: 2017-04-11

Does this hole saw cut sheet metal?

Asked by: FloridaSon
yes
Answered by: Jack
Date published: 2017-05-15

i need to drill through porcelin floor tile

Asked by: tony
No, would take a special saw for porcelin.
Answered by: Flash
Date published: 2017-03-07
  • y_2017, m_5, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_67
  • loc_, sid_202327766, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • QUESTIONS, PRODUCT

Customer Reviews

6 in. Hole Dozer Hole Saw is rated 4.1 out of 5 by 427.
Rated 5 out of 5 by from The hole saw did what it was designed for I bored 10 holes in 3\4 thick cast iron plates with on... The hole saw did what it was designed for I bored 10 holes in 3\4 thick cast iron plates with only one hole saw I completed the job under the estimated time which equals profit They are good for those who know feeds and speed run them a slow rpm and they will last many jobs down the road
Date published: 2016-12-20
Rated 5 out of 5 by from Bored 20 holes in 1/4" steel plate and this saw is as sharp after the last as it was on the first... Bored 20 holes in 1/4" steel plate and this saw is as sharp after the last as it was on the first. Used plenty of cutting oil, enough pressure to produce continuous chips, and 250 rpm speed on my drill press. Holes are clean and round. All this and a lifetime tooth breakage warranty? Very impressive and highly recommended.
Date published: 2017-01-25
Rated 3 out of 5 by from not very happy with this one .. vey dull after drilling about 7 holes. but would still buy again... not very happy with this one .. vey dull after drilling about 7 holes. but would still buy again . most of the time they a great.
Date published: 2016-12-29
Rated 5 out of 5 by from Cuts through 1/4" plate steel with no problem. Made 20... Cuts through 1/4" plate steel with no problem. Made 20 hole cuts with no duling of the blade, so I give it an Excellent rating.
Date published: 2017-03-28
Rated 5 out of 5 by from Great for stainless steel ... Great for stainless steel
Date published: 2017-04-21
Rated 2 out of 5 by from I bought the 4" hole saw in order to install nine, 4 inch round ceiling electrical boxes. The cei... I bought the 4" hole saw in order to install nine, 4 inch round ceiling electrical boxes. The ceiling is 1/2" gypsum blue board with a veneer plaster sand swirl finish skim coat. The first three holes went fine, but I noticed the teeth were dulling at an alarming rate. By the time I got to the seventh hole, the teeth had completely worn away, and I had to "cut" new teeth into it using a Dremel tool and a an small stone. I realize that this hole saw is only meant for wood and steel, and I'm sure that the 1/8" veneer plaster is what dulled it, (once it got through the veneer plaster it cut like butter) but I was surprised at how quickly the teeth wore away considering that it was dulled by the fourth hole.
Date published: 2017-05-15
Rated 1 out of 5 by from This is a complete waste of money! I purchased this exact size from Harbor freight in a 3 pack wi... This is a complete waste of money! I purchased this exact size from Harbor freight in a 3 pack with variable sizes which is $10 less than this bit by itself. The generic bit made 5 recessed lighting holes with ease through lathe and plaster. I assumed if I spent a little more money it would get one that lasted longer and cut faster. I was completely wrong! This bit went dull after cutting two holes and I even pre-drilled the holes with the dull cheap bit to avoid the lathe from eating the teeth. I am sure this is good for cutting balsa wood at best.
Date published: 2017-03-03
Rated 5 out of 5 by from I used this with a quick change center drill bit arbor from Milwaukee and this was an excellent h... I used this with a quick change center drill bit arbor from Milwaukee and this was an excellent hole saw through my roof for a new attic fan vent. Makita 18V LXT 1/2 drill in higher torque mode was sufficient to cut through without flaw or trouble, maintaining light pressure and letting the saw do the work. A heavier duty drill would have provided even more torque, and with a handle mounted I think this saw would have drilled through quite rapidly. Excellent quality, excellent performance.
Date published: 2017-01-10
  • y_2017, m_5, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_427
  • loc_, sid_202327766, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 89ms
  • REVIEWS, PRODUCT