Milwaukee Electromagnetic Adjustable Position Drill Press with # 3 Morse Motor-4208-1 at The Home Depot
Free shipping


Model # 4208-1

Internet # 203168532

Electromagnetic Adjustable Position Drill Press with # 3 Morse Motor

Milwaukee Electromagnetic Adjustable Position Drill Press with # 3 Morse Motor

This item has been discontinued.
The Home Depot no longer carries this specific product.

$1,525.00 / each
Item cannot be shipped to the following state(s): GU,VI


In Stock



Model # 4208-1

Internet # 203168532

This combination unit features 2 products from Milwaukee, the 4203 an adjustable position, variable speed Drill Press base, and the 4297-1, a 1-1/4 in. drill motor. This Electromagnetic Adjustable position Drill Press has a drill capacity of 1-1/4 in., and a drill travel of 11 in. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

  • 1-1/4 inch capacity, 12.5 amp motor, 500/250 RPM
  • Solid state electronic switching
  • Feedback speed control
  • Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Amperage (amps)  12.5  Assembled Depth (in.)  21.0 in 
Assembled Height (in.)  18.75 in  Assembled Width (in.)  7 in 
Bench & Stationary Tool Type  Drill Press  Bench or Stationary  Bench 
Built-In Light  No  Certifications and Listings  1-UL Listed,CSA Listed,ETL Listed 
Chuck Capacity  1.25 in  Color Family  Red 
Cord Length (ft.)  8.0  Manufacturer Warranty  5 year Limited Tool Warranty 
Maximum Speed (rpm)  500  Minimum speed (rpm)  500 
Number of Speeds  Power Tool Product Type  Corded 
Product Depth (in.)  21  Product Height (in.)  18.75 
Product Weight (lb.)  82 lb  Product Width (in.) 
Reconditioned  No  Returnable  90-Day 
Spindle Travel  11 in  Voltage (volts)  120 
Work Light  No 


Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 by Looking to buy another one. We have been using one of these in our machine shop for 19 years and looking to get another one for our other plant. I hope the quality is as good as our old one. Eazy to do maintenance on it and adjustment of the gibs is simple. This is in a shop were 20 to 30 different people have used and abused it for all this time. We drill, ream, tap with no problem and have used it at 90 deg.drilling and taping into presses. I do not have anything bad to say about this machine. If it was lighter it would be cheeper in quality and durabilty. Being able to use taper shank drills as well as a drill chuck is great. August 10, 2012
1-1 of 1


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.