Rated 4.7 out of 5 by 13
Rated 5.0 out of 5.0 by John handy tools
These Milwaukee nut drivers work very well the 12 point socket end is handy and has a good grip on the bolt head. The fact that you can attach a wrench to the shaft comes in handy also when you need a bit more leverage. The rubber grip on the handle is easy on the hand but lets you get a firm grasp also, I use them every chance I get saves fumbling around looking for a socket all the time.
August 15, 2015
Rated 5.0 out of 5.0 by DB Better than average
Industrial electrician, had the big K brand, there ok, these are GREAT. 1/3 less for a set, and this includes a 9/16'' driver which theirs doesn't.
Hex shafts on these are stronger than the thin wall of the big K brand.
Sizes are embossed on plastic and imprinted on metal shaft for I.D., big K only has shallow print that wears off top. When buried in a tool bag slot, makes a difference. Noticed long ago Milwaukee sweats the details.
Only gripe is the partially recessed spline area makes gripping shallow or short nuts tricky, may have to hit it on the grinder to make it flush to tip.
January 22, 2016
Rated 5.0 out of 5.0 by Mark What I needed perfectly...
I don't know why HD doesn't sale this complete set in the store. I bought the first smaller set and was very pleased but was missing allot of the other sizes. I work for a communication company and find the size, deep slot, hex stem and grip of the handle perfect for loosening nuts and bolts of equipment I'm working on. I sometimes use a wench to grip around the hex part of the socket wrench to un tighten nuts but find most times the grip of the wench sufficient. Good product..
January 26, 2016
Rated 5.0 out of 5.0 by branden Great tools
Makes the job go so much smoother and faster great purchase
January 12, 2016
Rated 5.0 out of 5.0 by Byrd Great deal
Really good deal for these nut drivers, might not be magnetic but overall worth the money
December 15, 2015
Rated 5.0 out of 5.0 by Jeff the plumber Perfect all thread tool
I am a plumber, usually we use small channel locks or a box wrench for all thread nuts. With this you can easily tighten the nuts but the best part is you can why more easily start the nuts, anyone who uses all thread knows when you cut the rod, every so often you get the price with a burr on it and hand starting the nut drives you crazy. With this nut driver it makes it easy, and the magnet prevents you from dropping the nut off the ladder. Every one in commercial construction needs this. Especially the 9/16 one for 1/2 inch nuts on 3/8 all thread.
September 7, 2015
Rated 4.0 out of 5.0 by bham225 drivers
Just what the Doctor ordered, fast to the store were I picked them up thanks good Job!
October 6, 2015
Rated 3.0 out of 5.0 by glennhvacman Good tools, NOT for HVAC use
I purchased these nut drivers for HVAC use, where we constantly install and remove hex head screws. I quickly discovered these were not designed for this purpose. The splines are set to far back from the end of the nut driver, making very hard to get a grip on most hex head screws. Also, the depth of the socket is much deeper than any other nut driver I've owned, which then sets the magnet too far back to grab hex head screw. On the flip side, I'm sure this design is great for actually turning nuts and bolts, and the pass through design is great for threaded rod. It's just not the primary use I purchased them for.
December 7, 2014