Minwax 1-Qt. Satin Polycrylic Protective Finish-63333444 at The Home Depot
Free shipping
Discontinued

Minwax

Model # 63333444

Internet # 202061476

Store SKU # 404748

1-Qt. Satin Polycrylic Protective Finish


Minwax 1-Qt. Satin Polycrylic Protective Finish
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$17.97 / each
Item cannot be shipped to the following state(s): CA,CT,OR,RI,VT
Loading...

PRODUCT OVERVIEW

Model # 63333444

Internet # 202061476

Store SKU # 404748

Minwax Polycrylic Protective Finish is a protective topcoat for use on interior wood surfaces including furniture, trim, doors and cabinets. It can be used over bare wood and both oil-based and water-based stains. Polycrylic can be recoated in only 2 hours. Minwax Polycrylic resists damage from abrasion, scuffing, chipping, water, alcohol and other common household chemicals.

California residents: seeProposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Assembled Depth (in.)  4.37 in  Assembled Height (in.)  4.94 in 
Assembled Width (in.)  4.37 in  Cleanup  Soap & Water 
Container Size  1 QT-Quart  Coverage Area (sq. ft.)  125 
Dry to touch (min.)  180  Interior Paint & Stains Product Type  Shellac/Lacquer/Polyurethane 
Interior/Exterior  Interior  Manufacturer Warranty  NA 
Number of coats recommended  Opacity  Crystal clear 
Paint Product Type  Water-Based  Primer required  No 
Sheen  Satin  Time before recoating (hours) 
Type  Water-based 

CUSTOMER REVIEWS

Rated 3.7 out of 5 by 10 reviewers.
Rated 4 out of 5 by easy This product is so easy to work with, water clean up. It dries clear and quickly. Only time will tell if it lasts. I painted an outdoor sign and used this product because it dries clear. June 24, 2014
Rated 5 out of 5 by Love it I used it on a dresser that I painted white and it performed beautifully. A year later it is still as clear as the day I applied it and has been very durable. It was a breeze to apply - I actually used a sprayer to apply it - and it dried in a snap. It dried much quicker that polyurethane and has never yellowed one bit like poly will. And since it's water-based it doesn't have the strong odor and fumes like all of the other clear coats have, and it cleans up with soap and water. I don't know what the other reviewers who reported to have problems did wrong, but if you just follow the instructions you will not be disappointed. It's actually pretty idiot-proof, which makes it a great clear coat for almost anyone to work with. March 29, 2014
Rated 5 out of 5 by Front Door protection in brutal elements Sanded down a front door, then stained followed by protection with this product. Easy to use, clear, and beautiful. For maintenance, the directions state a fine sanding and recoating is all that is needed. The finish is still excellent after a year but tested the claim on a superficial scratch left by shears. Dabbed a little of the polycrylic on and the scratch disappeared, Impressive! May 10, 2014
Rated 5 out of 5 by Salvaged a bad table top. I ordered a table on-line and when it arrived the table top was worn and in need of refinishing. I used Minwax stain to give it a consistent color, then used multiple coats of Minwax Polyacrylic protective finish, sanding with 220 sandpaper between coats. The table top looks great. November 19, 2013
Rated 5 out of 5 by Love it. I had not used a low VOC water based clear coat product before. I always used products such as Minwax wipe on poly, lacquer and shellac. This product is much easy to use and cleans up with soap and water, love it. I recommend you splurge and buy a 2 inch Purdy nylon polyester paint brush. I have used the same brush for two months on water based stain and clear coat. It still looks and feels like new. Good luck with your project. February 9, 2013
2 >>

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.