Model # 33333000

Internet #100376151

Store SKU #387256

Minwax 11.5 oz. Satin Polycrylic Protective Finish Aerosol Spray


11.5 oz. Satin Polycrylic Protective Finish Aerosol Spray

$1196 /each

Choose Your Options

Number per Package
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Minwax Polycrylic Protective Finish is a protective topcoat for use on interior wood surfaces including furniture, trim, doors and cabinets. It can be used over bare wood and both oil-based and water-based stains. Polycrylic can be recoated in only 2 hours. Minwax Polycrylic resists damage from abrasion, scuffing, chipping, water, alcohol and other common household chemicals.

California residents: see   Proposition 65 information

  • Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets
  • Covers 35 sq. ft.
  • Crystal clear finish
  • Ideal for use over light woods like maple, ash and birch as well as over Minwax water based wood stains
  • Aerosol spray makes application quick and easy
  • Ultra fast-drying- (2 hour)
  • Easy water clean up

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.



Container Size
11.5 OZ-Ounce
Coverage Area (sq. ft.)


Aerosol / NonAerosol
Coating Product Category
Dry to touch (min.)
Number of coats recommended
Number per Package
Paint/Stain Base Material
Paint/Stain Clean Up
Soap & Water
Paint/Stain Key Features
No additional features
Paint/Stain/Waterproofer Product Type
Shellac, Lacquer & Polyurethane
Substrate/Surface Use Type
Time before recoating (hours)

Warranty / Certifications

Manufacturer Warranty

More Products With These Features


Customer Questions & Answers

Can I use MixWax polycrylic on stove top which has been painted with stainless steel paint?

Can I use MixWax polycrylic on stove top which has been painted with stainless steel paint?
Asked by: Jerri
Hello. None of our products are recommended for use directly on a stove top. Regards, Minwax Customer Support
Answered by: MINWAX
Date published: 2017-05-25
  • y_2017, m_8, d_18, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_100376151, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms

Customer Reviews

11.5 oz. Satin Polycrylic Protective Finish Aerosol Spray is rated 2.2 out of 5 by 10.
Rated 1 out of 5 by from I followed directions but still got big globs about 30 seconds into spraying. It ruined my entir... I followed directions but still got big globs about 30 seconds into spraying. It ruined my entire kitchen table I was refinishing. This was supposed to be the last I have to strip the entire table down again and waste $30 worth of stain and days of work.
Date published: 2017-05-18
Rated 1 out of 5 by from Spits like a crazed monkey Unfortunate I can't give a zero star or, better, a negative 5 stars. This product not only spits like a crazed monkey (see other reviews), that spittle ruins the work you've done to get to this point in the refinish process. Water-based poly is fine, but applying it in spits and spurts actually destroys the previous steps you've done, such as stain, and forces you to take the wood back down to bare, just to clean up the spittle. DO NOT BUY THIS GARBAGE... use the liquid form and a brush.
Date published: 2016-08-04
Rated 1 out of 5 by from Dont buy I spray polyacrylic water based finish in my spray equipment on a regular basis and have very good results. I thought that by using the aerosol spray on a small project would be easy to use as I would not have to set up my spray equipment and then clean it. However, the aerosol spits and sputters large globules of finish all over. It is completely worthless and now I have to let it dry and sand it out. So much for easy. Do Not Buy.
Date published: 2015-07-26
Rated 5 out of 5 by from Excellent Product I've used this many times and have had mixed results UNTIL I started warming the can up before spraying. With the can warmed up it goes on PERFECT, I use it to refinish guitars LOVE IT!. Warm up the can, be sure to shake well and clear the nozzle every time before spraying the piece. Nothing nicer out there!
Date published: 2016-03-19
Rated 1 out of 5 by from Terrible Product Followed the directions and it still spit and sputtered and ruined my project. Terrible!
Date published: 2015-09-02
Rated 4 out of 5 by from One Must Read Directions! Folks, if you read the directions even not-that-carefully, you will realize the "secret" to avoiding clogging in the sprayer tip; this polycrylic is a a form of plastic. Once it comes into contact with air, a chemical reaction begins. Chemicals gas-off and the result is hardening of the material. Thus, if you choose to avoid following the direction that states you should turn the can upside-down and spray until clear gas comes out, then you are simply asking for a clog to occur. I build guitars as a hobby and recently chose to venture into using water-based polyurethanes to finish them. I used the non-spray polycrylic as a rub-on and then used this after many coats and progressively finer sandings, and achieved a crystal-clear coat in one body session. Frankly, I am impressed at how well this compares to the highly toxic nitrocellulose lacquer that luthiers rave about. If you are for saving a bit of money, buy the polycrylic in the can and use with an HVLP spray gun on a higher volume setting and with a very low pressure setting. One disadvantage is that it does go on thick and dries to a tacky consistency very quickly. Test on scrap pieces of wood before your fine project! Wasting a small amount of a $12 product usually means nothing if it is to magnify the beauty of one's creation.
Date published: 2015-06-10
Rated 1 out of 5 by from Terrible As a one time professional furniture refinisher, Minwax made certain jobs very easy. I've recently tried using the Minwax water soluble finishes on a few recent furniture projects. I'd start with the brush on clear, and then (because I don't have my sprayers here) would do the finishing coats with the Aerosol Spray Clear Water Soluble. Minwax, you gotta do something about these! They SPIT terribly and RUIN the finish. Minwax users, if you're going to do a fine wood project STAY AWAY FROM THESE
Date published: 2015-03-25
Rated 1 out of 5 by from Failed finish Followed the instructions and came out of the can in clumps and dripped from the tip. Had to follow up with a paint brush to save the work.
Date published: 2014-08-31
  • y_2017, m_8, d_18, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_100376151, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 191ms