Rated 4.3 out of 5 by 9
Rated 5.0 out of 5.0 by Lola Works as Directed
I was installing marble flooring and walls in my bathrooms and bedroom and applied epxy grout to all the surface. This little bottle goes a long way. I cleaned the suface three times each and I still have left over in the bottle. I suggest using this product 24 hours after install as the grout is still soft oenough to be removed and hard enough in between the grout lines that will not disturb its application. I recommend bying a non scratch pad and a non scratch bristle brush to scrub away the excess film residue. The next time I do a remodel project I will avoid using epoxy and use an equivalent but good thing for this invention.
May 1, 2016
Rated 4.0 out of 5.0 by CMB Not easy, but it works
My tile guy used Custom epoxy grout on my matte, porcelain tile and did not wash all of it off, so it left a shiny film on every tile. I tried EVERYTHING. Sandpaper, mineral spirits, vinegar, three other tile cleaners, etc. did not even come close to removing it. This worked, but it was a LOT of work. I poured it on, spread it out with a brush, and let it sit for 30+ minutes. I scrubbed it with a wire brush over and over. Then I used a plastic brush and a scrub pad. I washed it with hot water and Dawn, rinsed it and dried it with a towel. Most of the shine came off, but they were still shiny spots I had to remove using the same process. 32 ounces did about 100 square feet. I had to order a second bottle for my 12 X 16 room. Luckily my tile was on screened porch. Even with air coming in and a ceiling fan going, the fumes gave me a headache. Use rubber gloves! I will NEVER let anyone use epoxy grout on my tile again! The bottle recommended using a stripper afterwards, but the product is no loner available. Good luck!
July 8, 2016
Rated 5.0 out of 5.0 by carosche It works!
Tried all sorts of things, couldn't get the epoxy drip marks off. This stuff works GREAT!
June 24, 2016
Rated 1.0 out of 5.0 by Sportlos Garbage
Did as the directions said and it did not work...I wasted my money
March 23, 2016
Rated 5.0 out of 5.0 by Laura970 Had tried everything
Or so we thought. When we first laid the tile, we got distracted and faIles to remove all the epoxy grout. It's been a year. This stuff softened it so I could simply clean it with a paper towel.
December 8, 2015
Rated 5.0 out of 5.0 by Rick Amazing
I did not get the tiles clean enough after my self install. Over months, tiles became unsightly as the residue darkened. Even a fiber sanding wheel would not remove it. Years later, I discover this stuff. It removed it all with not too much effort. I wish I had discovered this sooner. Be warned, the fumes are a bit intense. Be sure to read the significant health warnings.
June 28, 2015
Rated 5.0 out of 5.0 by SweetJimmy Pretty Amazing Stuff...
It started with some old dried epoxy grout I hadn't wiped off in time before it dried. At first I tried abrasives but was scratching the surface of the tiles so I stopped. Months went by, then a year past and I didn't know what to do. Then one day I found this product via a youtube video. I ordered it and applied it, full strength, with a spray bottle. I let it sit for 10 min and then used gloves and a fairly gentle scouring brush to remove the old epoxy on the surface. I now have a beautiful bathroom backsplash!!!
February 10, 2015
Rated 5.0 out of 5.0 by Dave Great Product
This stuff works great. I poured a little bit into the bottom of a metal can and applied with a natural bristle brush and waited 20 minutes. It melted the epoxy haze which I then removed with a soft cotton cloth. My ceramic tile looks great. I still have a few more areas to do, but the one quart size goes a long way.
June 25, 2011