Rated 4.2 out of 5 by 59
Rated 4.0 out of 5.0 by Wayne Product works well and easy to apply!
Just roll it on, that's it. I used it on a slate floor in the kitchen that may take some nasty spills every now and then and it works fine. I recommend 2 coats six months apart just after you have let the slate tiles flake down a bit from foot traffic. After that point you are good to go. I am not sure how long it last (only been on there for 6 months) so I will watch it see how it holds up. If another coat is needed in the future then it is easy to apply. This really does look good after the application, no enhancement or shiny look, just a natural appearance.
November 4, 2014
Rated 5.0 out of 5.0 by Ziffer Excellent Sealer..........
This is a top of the line penetrating sealer. I am a tile contractor, and this is the main sealer that I use. This is an oil base sealer, that I prefer over a water base sealer. It has a chemical odor when first applying, but it goes away after a few hours. You can wear a mask and gloves when applying, but I never have in over 20 years. This is one of the best sealers that you can use..... by far. I use it on any of my stone tiles, and on grout. You apply it, leave it on for 3-5 minutes, and then buff it off. Easy enough. Hope this helps.
January 28, 2015
Rated 5.0 out of 5.0 by WeekEndWarrior Great for my Table Tile project
The Penetrating Sealer applies quickly and helps to seal the grout surface very well.
I've used it on a couple of Tiled Tables to be used on my patio. They will be well protected.
March 30, 2015
Rated 4.0 out of 5.0 by Remo Grout sealer
The product was useful and effective on sealing the grout , but you have to use a small brush just to seal and the grout area. It can stain the tiles if you are not careful of avoiding the spill. Use mask to prevent inhalation and use gloves to protect your skin. Open air is advisable when using it.apply once and reapply only after 24 hours . Test by dropping a small drop of water to make sure the grout was fully seal, if the grout did not adsorb the water it mean it was sealed.
March 24, 2015
Rated 5.0 out of 5.0 by TheLandlord Amazing Product: Customer for Life
Followed instructions and the product worked as directed. I am super impressed by the results. One coat for the bathroom was enough to make water beads dance away. Have recommended product to everyone I know that is working on their home. I used this on my new ceramic tile floor, bathroom tile, and granite counter tops. Won't stain or disappoint.
February 25, 2014
Rated 5.0 out of 5.0 by Mrjon Fine product
The sealer was easy to apply and did not discolor the grout. One coat was enough.
December 25, 2012
Rated 5.0 out of 5.0 by BillZ Outstanding product
Purchased Tile Lab first; used as directed and applied it twice to newly grouted porcelain tile floor. Did not live up to mfg. claims. Water seeped right into the grout. Then, I purchased the 511 Impregnator/sealer and that worked 100% on the first application. I did apply it twice (just for additional insurance) and it definitely passes the water bead test.
Do not waste your money and time on any other product but 511--it even added additional protection to the porcelain tile.
I used an inexpensive 1" paint brush, applied as directed, let it sit for 3-5 minutes, and then wiped up remaining liquid with a soft, clean towel. That's all it takes!
August 10, 2013
Rated 5.0 out of 5.0 by phylfitz Great productg
I used this product after using a product I had used many times in the past. The older product left streaks on the 20"x20" tiles that were very noticeable. I did not have those streaks with the 511 Impregnator. Will use only this product in the future, especially with the larger tiles.
October 15, 2013