Free Shipping and BOPIS


Model # 15248

Internet # 100052088

Store SKU # 143971

48 in. Beveled Acrylic Mirror Strips (2-Pack)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$17.98 /each




Model # 15248

Internet # 100052088

Store SKU # 143971

Use the MirrEdge Beveled Acrylic Mirror Strips (2-Pack) to give your mirror a finished, sleek look. The acrylic mirror finish looks like a real mirror, and the strips are easy to size and cut for a proper fit. Acrylic Mirror Strips measure 1.5 in. wide. Framing strips apply to existing mirrors with included double faced tape squares plus adhesive glue which can be purchased separately. Liquid Nails LN-700 is recommended. NOTE: Do not use cleaners containing ammonia. Alcohol based cleaners or Pledge Furniture Polish is recommended for cleaning.

  • Edging system to be used with existing mirrors
  • Acrylic mirror finish looks just like a real mirror
  • Easy to cut and size using only a razor knife
  • Strips measure 1.5 in. W x 48 in. L
  • Includes double-faced adhesive tape squares
  • Must use with either mirredge adhesive or original formula liquid nails adhesive (not included)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Accessory or kit type 
Mirror Framing Strip 
Attached shelf 
Hardware Included 
Mirror type 
Mount Location 


Rated 4.2 out of 5 by 17 reviewers.
Rated 5.0 out of 5.0 by Worked & looked great for my need This product worked perfectly for what I needed it for, which was to align the outside of a mirrored backsplash that had chipped. It covered it perfectly and gave it a more custom look. This is not a glass mirror, but a flexible, cuttable product which mimics a glass mirror very well. I ordered the beveled edge & am glad I did - I feel the bevel contributed to a more custom look which was the end result. October 21, 2014
Rated 5.0 out of 5.0 by Exactly what I needed to give my old mirrors a facelift! The product was a great value, arrived in a timely fashion, was easy to work with and install and provided a bright new look for my old mirrors. This trim was an integral part of my bathroom makeover with a lot less expense and labor than I would have faced with mirror replacement. Those ugly, blackening mirror edges are now a thing of the past! The results of this project exceeded my expectations! April 24, 2013
Rated 4.0 out of 5.0 by It made a difference Quick delivery, easy installation, good price, changed old mirror's look. May 13, 2015
Rated 5.0 out of 5.0 by Acrylic Mirror Strips, great to use. Have used these strips on most of the mirrors in the house. The are great when the edges of the mirrors begin to lose their lamination and the edges turn black. Very easy to work with and using the corner pieces allows you to not have to cut exact measurements. You just have to score the strip and snap it off to the proper length. I did have a problem when I tried to do an angle cut, but I am not great with a hacksaw. June 30, 2015
Rated 4.0 out of 5.0 by MirrEdge The final look is nice, but there are NEVER enough of the double stick tabs, and the glue should be included. I've ordered several sets so this opinion comes from a lot of experience. I first used the tabs that came with the set, plus purchased the glue, and 3 of the edges came down and smeared glue all over my mirror & scratched the MirrEdge so I had to re-order to replace. February 5, 2011
Rated 5.0 out of 5.0 by Easy to install Easy to install and looks great. Would recommend not using the little sticky pads included as it tends t stick out to far. Us the PN-700 liquid nail and hold in place with blue painters tape for 24-hours. When cutting the horizontal pieces I wouldn't reduce by the extra coupl eof inches the instructions recommend. Measure three times and adjust so that you get a nice fit with a minimum gap (you"ll cover this anyhow with a joiner or corner piece) but avoid the gap. Perfect! July 24, 2010
Rated 1.0 out of 5.0 by Disaster. Management and employee at Home Depot save the day I used an adhesive on the mirror trim as recommended on the website by other purchasers. A Home Depot employee found the adhesive he thought would work best. 48 hours later the adhesive had burned through the mirror finish onto the front of the trim. I went to Home Depot and spoke to manager Edmond Verrette. He wanted photos that I had with me, made copies of my transaction and began to investigate to find the correct solvent. Edmond Verrette found the correct adhesive and tested it before sending his employee, Charles Morris, out to remove the damaged trim and attach the new trim. Mr. Morris did a wonderful job of changing out the trim. Disaster averted. My pleasure with the management of Home Depot is enormous. Edmond Verrette made a angry and frustrated do-it yourselfor into a life long happy customer. I would use this product with caution. I was very lucky to find management that stood by a product they sold! July 30, 2015
Rated 5.0 out of 5.0 by easy to use perfect for changing the look of the mirror you have on the wall July 25, 2011
  • 2015-11-26 T11:51:57.989-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_17, tr_17
  • loc_en_US, sid_100052088, prod, sort_default
2 >>