0628888192251

Multinautic

Model 19225

Internet #203676794

Boat Ramp Kit

$389.00 /box

Frequently Bought Together

Product Overview

This Multinautic do it yourself R-1200 ramp kit allows you to build your own ramp for small boats or personal water craft up to 1200 pounds. It allows you to securely beach your boat or PWC on the shore line and prevent any damages to hull or turbine due to sand or rock abrasion. Also, being secured on the ramp, your PWC or small craft will never rub on or under the dock or on sharp brackets due wave or wake action. You can also remove the drain plug of your fishing boat in order to make sure it will not fill with water and sink. Piece of mind for a very small investment. The kit contains the (8x) 4 in. wheels and brackets, leg holders, posts and base plates to secure and adjust the ramp to your own shoreline, the winch and strap, the 8 in. keel roller and brackets and all the necessary mounting hardware. Plans and Instructions easily guide you through building your own customizable ramp so you can achieve professional results with ease. Lumber not included.

  • Does not include lumber, screws, bolts and nuts, needed; 40 green screws 3 in., 32 pieces 3/8 in. x 3 in. carriage bolts, washer and nuts, 2 pieces 3/8 in. x 4-1/2 in. carriage bolts, washers and nuts, 4 pieces 1/2 in. x 2-1/2 in. carriage bolts, washers and nuts
  • Perfect to protect your investment and assure your piece of mind
  • Adjustable posts and base plates to meet your shoreline's requirements
  • Winch up and roll down your boat or PWC with ease

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions7 Answers

Customer Questions & Answers

Boat Ramp Kit
Boat Ramp Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Boat Ramp Kit
 
2 answers

How is the system anchored at the shore and in the water?

This question is from Boat Ramp Kit
Asked by
Geneseo, ny
Read all my Q&A
April 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Palmyra, VA
Read all my Q&A
Home Improvement Profile: DIYer
June 23, 2016
Answer: 
I attached the feet about six inches up the legs, then drove them into the lake bed, as the Multinautic online instructions suggest. The top end doesn't need any anchoring.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

April 26, 2016
Answer: 
Hi Peye, actually this ramp is not anchored at all.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
This question is from Boat Ramp Kit
 
1 answer

Is there a way to build this kit with man-made "lumber" rather than the CCA as shown in the picture? Also, could this kit be attached to a boat dock?

This question is from Boat Ramp Kit
Asked by
Lake of the Ozarks, MO
Read all my Q&A
July 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 26, 2016
Answer: 
Hi Marty, Yes you can use man-made lumber as long as you respect the dimensions. As for attaching t a Dock, I'm afraid you cannot this Ramp is made to be on the shore. Hope this answers your question
Multinautic Team
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Boat Ramp Kit
 
1 answer

Where can I get directions on how to put together my two kits that I bought. I don't see any directions in the boxes

This question is from Boat Ramp Kit
Asked by
Read all my Q&A
July 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 4, 2016
Answer: 
Hi Steve, You will love those ramp kits!
Actually, the instructions are on the Home Depot site, look right next to the description this is what you'll see:

Info & Guides
Instructions / Assembly
Specification
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Boat Ramp Kit
 
1 answer

The product description doesn't say if the steel parts are galvanized. Are they?

This question is from Boat Ramp Kit
Asked by
WIllsboro, NY
Read all my Q&A
June 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 28, 2016
Answer: 
Hello Don,
Yes all parts made of steel are galvanized (brackets, bolts, nut kits ...)
The winch has a durable zinc finish coat
I hope this helps.
Regards,
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-11 T17:54:07.932-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203676794, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 66ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 68ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;