The product you chose is discontinued, but we found something similar you might like.
Motion Activated LED Night Light with 10 ft. LED Flex Strips, 1 Sensor, Adjustable Timer and Dimmer
  • Mylight.Me
  • Model 2244050172
  • Internet #206783284
  • Store SO SKU #

Motion Activated LED Night Light with 10 ft. LED Flex Strips, 1 Sensor, Adjustable Timer and Dimmer

Discontinued Model:

Model # 2244050171

Internet #205829721

Mylight.Me 10 ft. LED Flex Strip Adjustable Timer Motion Activated Closet Light with Single Sensor

Discontinued Mylight.Me

10 ft. LED Flex Strip Adjustable Timer Motion Activated Closet Light with Single Sensor

store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Closet light by Mylight.Me is an innovative LED flex strip lighting solution designed to provide comfort and safety in your home. Consisting of one 10 ft. LED strip and 1 motion activated sensor, closet light provides light in areas that require extra lighting - even during the day. Designed with self adhesive tape for easy mounting and installation that requires no tools. The timer controlled, motion activated sensor replaces the need for switches and responds to your needs, lighting whenever motion is detected offering light for a dark closet or work space when you need it. Mylight.Me powered by 110-Volt outlet and uses energy efficient LED lighting that consumes 80% less power than traditional incandescent lighting. Mylight.Me is designed to be placed in a wide variety of places throughout your home.
  • 1 motion sensor, activated in any level of light
  • One 10 ft. LED ambient light strip with 10 LEDs per foot
  • Easily installed with no tools
  • Automatic shut-off timer, adjustable from 30 seconds to 10 minutes
  • Warm, soft light of 2700K
  • 350 Lumens output comparable to 25-Watt
  • 30,000 hours of usage (3 plus years at continuous use)
  • 2 wire mounting brackets to keep wires in place
  • 3M self adhesive strip to fasten the LED strip where needed
  • Standard 110-Volt plugs; requires no batteries
  • Suitable for indoor applications only
  • Click here for more information on Electronic Recycling Programs

Product Overview

Closet light by Mylight.Me is an innovative LED flex strip lighting solution designed to provide comfort and safety in your home. Consisting of one 10 ft. LED strip and 1 motion activated sensor, closet light provides light in areas that require extra lighting - even during the day. Designed with self adhesive tape for easy mounting and installation that requires no tools. The timer controlled, motion activated sensor replaces the need for switches and responds to your needs, lighting whenever motion is detected offering light for a dark closet or work space when you need it. Mylight.Me powered by 110-Volt outlet and uses energy efficient LED lighting that consumes 80% less power than traditional incandescent lighting. Mylight.Me is designed to be placed in a wide variety of places throughout your home.

  • 1 motion sensor, activated in any level of light
  • One 10 ft. LED ambient light strip with 10 LEDs per foot
  • Easily installed with no tools
  • Automatic shut-off timer, adjustable from 30 seconds to 10 minutes
  • Warm, soft light of 2700K
  • 350 Lumens output comparable to 25-Watt
  • 30,000 hours of usage (3 plus years at continuous use)
  • 2 wire mounting brackets to keep wires in place
  • 3M self adhesive strip to fasten the LED strip where needed
  • Standard 110-Volt plugs; requires no batteries
  • Suitable for indoor applications only
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
120
Product Height (in.)
0.25
Product Width (in.)
0.5

Details

Adjustable brightness
No
Bulb(s) Included
Yes
Color Family
White
Fire Resistant
No
Light Source
LED
Motion-Activated Light
Yes
Number in Pack
1
Number of Bulbs Required
0
Outlet Cover
No
Power Source
110 Volt
Product Weight (lb.)
1.2lb
Recommended Bulb Type
N/A - LED included
Returnable
90-Day
Wattage (watts)
7.5

Warranty / Certifications

Certifications and Listings
4-UL Certified,cUL Listed
Manufacturer Warranty
2 Year Limited Warranty

Specifications

Dimensions

Product Depth (in.)
120
Product Height (in.)
0.25
Product Width (in.)
0.5

Details

Adjustable brightness
No
Bulb(s) Included
Yes
Color Family
White
Fire Resistant
No
Light Source
LED
Motion-Activated Light
Yes
Number in Pack
1
Number of Bulbs Required
0
Outlet Cover
No
Power Source
110 Volt
Product Weight (lb.)
1.2lb
Recommended Bulb Type
N/A - LED included
Returnable
90-Day
Wattage (watts)
7.5

Warranty / Certifications

Certifications and Listings
4-UL Certified,cUL Listed
Manufacturer Warranty
2 Year Limited Warranty

More Products With These Features

Search

Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 137ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

10 ft. LED Flex Strip Adjustable Timer Motion Activated Closet Light with Single Sensor is rated 4.9 out of 5 by 8.
Rated 5 out of 5 by from Awesome Looking Pantry Lighting! We have a closet pantry that is 2' deep and 3' wide, with shelves that extend nearly the full depth of the closet. It has always been a challenge to see anything in this pantry because the when you stand in front of it your shadow blocks nearly all of the outside light. A ceiling light would not be very effective at lighting anything but the top shelf, so we never bothered to put one in. The mylight closet light is the perfect solution to this problem, and is perhaps the best possible use for this kit. The closet light provides much less flexibility than the bed light kits, as the shorter light strips included in those kits can be used separately or connected end-to-end, where the single longer light strip in the closet kit cannot be divided. While you can cut the strip at the indicated locations between every third light, no hardware to connect separate segments is included. Also, the single bed light has two leads off of the sensor, where the closet light has only one. There are infinitely more installation configuration options if multiple mylight kits are purchased. The power adapter is capable of powering an additional 5' of light strip beyond the 10' included in the kit. I also purchased a bed light, but only used one of the light strips in that installation. Since the bed light strip can be connected end-to-end, the included 10' strip can be connected to the end of a 5' bed light strip for additional light. Since I only used one light strip in the bed light installation, I swapped the sensors and used the single-lead closet light sensor in the bedroom and the dual-lead bed light sensor in the closet, allowing 10' of light in one direction and 5' of light in the other. The biggest obstacle for the closet installation was the lack of a power receptacle to plug in the light inside the closet. Possible solutions are to install the sensor just inside the door and route the cord along the baseboard to a receptacle outside the closet or to add a receptacle inside the closet. I chose to add a receptacle because there was not one available outside the pantry closet close enough for the power wire to reach. An old work retrofit junction box can be installed in minutes, and if there is an existing junction box nearby, the wiring can be completed in under half an hour. Don't give up on lighting a closet just because it doesn't have a power receptacle! I mounted the light sensor in the center of the back wall facing toward the door just under one of the wire shelves at around knee level. Even though the shelves above and below the sensor are full, the sensor still has a clear view through the lip of the shelf, and turns on every single time the door is opened. From the sensor I ran the leads (two, because I used the dual lead sensor from the bed light) along the edge of the shelf across the back wall and up the side of the shelf to the front corners of the closet. This same configuration would also work with the included single-lead sensor and just the 10' light strip that comes in the closet light kit. The longer 10' strip is mounted in a U shape, running 6' up one wall, 3' across the ceiling, and 1' down the other wall. This meets the end of the 5' strip coming up from the other wall, giving 15' of continuous light, providing light from 2' above the floor on each side of the door all the way up to the ceiling. The adhesive backing included on the strips sticks fine to the walls, but not to a spackled ceiling. Mounting to the ceiling required the use of a thicker foam tape. As you can see in the picture, this gives better lighting throughout our pantry than I ever thought possible. It lights up the moment the door is opened, and turns off shortly after the door is closed. Even if you have a light in your shallow closet, this is such an upgrade that I would recommend it to anyone. Great for any pantry, coat closet, linen closet, or other dimly lit shallow closet.
Date published: 2015-05-12
Rated 5 out of 5 by from Not just for closets We built a little ledge in our foyer to tuck away some sort of coil lighting. I came across these LED closet lights -- they are a much better solution. The LED strip has a sticky backing that allowed us to easily tack up the strip under the narrow ledge. It's very thin and indiscreet. With the sensor, these LEDs will come on automatically giving enough light to make our way through the foyerwithout having to use the overhead lights.
Date published: 2015-05-08
Rated 5 out of 5 by from Great solution for the one closet in our home without a light. We have always had one food storage closet in our home without a light, and it never crossed my mind to add additional lighting to it, until I came across this product. I just had to have it! I installed it in my closet which thankfully already has a power outlet installed, and every time we open the door it detects the motion, and we get some extra illumination in there when we need it most, without wasting any excess electricity. I recommended this product to a relative of mine, after the tested it out at our home and were impressed by it. They have a couple of closets they now want to install this in to get some extra light in there. Sure beats installing a brand new light fixture and trying to run new wires and switches everywhere.
Date published: 2015-07-15
Rated 5 out of 5 by from Surprisingly bright lights for my closet In my new 35-sq. ft. closet, I made the mistake of having only a single light hardwired near the closet door. This LED unit perfectly illuminates the rest of the closet. It took less than 5 minutes to install the entire strip, motion sensor, and cord-holder clips; all components mounted easily using super-sticky backing (it's sticky enough that you need to make sure you place it correctly the first time because it will peel drywall paper if you pull it off). I mounted the LED strip just under and behind the overhang on the shelf above my closet rod. The motion sensor is just inside my closet door. I have the timer set to the minimum time (30 seconds), but fortunately the sensor seems to work even when the lights are already on - the lights stay on until 30 seconds after I leave the closet, and they don't turn off while I'm in there - so no need to wave my arms to keep the lights on. The lights are surprisingly bright and show items in true-color, so they are great for closets. Overall this little unit is well worth the price and functions much better than expected - I am pleased!
Date published: 2015-04-26
Rated 5 out of 5 by from Great for dark, small spaces These are intended for use in a closet, but I used them to provide additional lighting in my kitchen cabinets, particularly a dark corner. The motion sensor was installed inside a cabinet, out of view and aligned in such a way that opening the door would turn on the lights. I set the timer to 30 seconds (the minimum), but it can be adjusted all the way up to 10 minutes. The cable from the 12v power adapter is about 7 feet long and the cables from the LED strip and motion sensor are also generously long. The LED strip itself is 10 feet long and can be trimmed at certain points which are clearly marked. Light output from the LEDs is bright and more than adequate for small spaces. Color temperature is warm. My only issue is that the motion sensor mount doesn't securely hold it in place and it can be easily bumped off. I solved this issue by taping it so it wouldn't easily rotate off. Also, the instructions state that it needs to be in a dark location for it to function properly. The LED strip can be hooked up directly to the 12v power adapter if you choose to plug it into a switched outlet.
Date published: 2015-05-13
Rated 5 out of 5 by from Great Solution To A Dark Closet This rope lighting is large enough to line a double closet and really does illuminate the entire closet. The peel-and-stick backing makes it easy to position wherever you prefer. We lined the entire perimeter of the closet. The sensor works very well - when the doors are opened the lighting is automatic. Luckily we had an outlet nearby to plug it in though. I was worried that it wouldn't be bright enough but it was fine.
Date published: 2015-04-20
Rated 4 out of 5 by from Good concept and it works great These are great little lights and they work well. I have installed them as a night light for a stair case that my kids use a lot. They work great.
Date published: 2015-05-05
Rated 5 out of 5 by from Great Lighting Simple to install and provides great light at night with motion activated sensor.
Date published: 2015-01-28
  • y_2017, m_9, d_19, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_205829721, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 117ms
  • REVIEWS, PRODUCT