Free Shipping and BOPIS

Newport Coastal

Model # 7780-01B

Internet # 100671538

Store SKU # 580932

Photo Eye Replacement

This item has been discontinued.
The Home Depot no longer carries this specific product.

$14.97 /each




Model # 7780-01B

Internet # 100671538

Store SKU # 580932

This Newport Coastal Photo Eye Replacement conveniently converts your ordinary outdoor post light into a dawn-to-dusk lighting fixture with its photo eye. Easy to install. It conveniently activates the post top light at dusk and de-activates the light at dawn, saving you time and energy.

  • Anti-rust, anti-chip plastic
  • Turns your outdoor lighting post into a dusk-to-dawn lighting fixture
  • UV resistant
  • Matte black color


Product Depth (in.) 
Product Height (in.) 
8.5 in 
Product Length (in.) 
6 in 
Product Width (in.) 
2.25 in 
Exterior Lighting Accessory Type 
Light Source 
Outdoor Lighting Features 
Weather Resistant 
Product Type 
Photo Eye Replacement 
Product Weight (lb.) 
.22 lb 
Weather Resistant 
Warranty / Certifications
Manufacturer Warranty 
Limited Lifetime Warranty 


Rated 3.8 out of 5 by 25 reviewers.
Rated 1.0 out of 5.0 by Horrible Product This product required a lot of tight maneuvering for the install but once it was in, it worked great... FOR THREE DAYS. Then the unit failed and required me to purchase a new sensor (not from the same manufacturer) and go through the entire install again. I'm happy to say the new sensor has worked perfectly for the past week... Home Depot needs to find a new supplier for these sensors, possibly one not in Southeast Asia. September 2, 2015
Rated 1.0 out of 5.0 by Didn't Work, TWICE! First one didn't work so I returned to store and exchanged it for same product . Second one doesn't work. I will be getting my money back and shopping elsewhere for photo eye. The instructions of the wire color/description doesn't match product. Wired photo eye as labled on product. September 14, 2015
Rated 4.0 out of 5.0 by 10 It was replacement part for light sensor. It worked like it was supposed to. September 8, 2015
Rated 3.0 out of 5.0 by Caution - watch the hole size requirements If your application requires the mounting post to fit a 1/2"KO you will need a reducing washer as the post diameter is 5/8". Or the locknut supplied with this photo eye will pull through the 1/2" KO hole.. August 21, 2015
Rated 1.0 out of 5.0 by Bad Purchase !!! I bought this photo eye as a replacement in March,2015. Three months later it died and I had to replace it again. I think three (3) months is an extremely short life for this type of device. My previous photo eye lasted for several years. I definitely will not purchase this brand photo eye again. July 14, 2015
Rated 1.0 out of 5.0 by ??!! Can't believe all the good reviews! Put one of these in five years ago. Had to return the first two because they did not work right out of the package. I cut a hole in my lamp post to fit the fixture so I'm married to the product. It stopped working and this time the first three I tried did not work. The fourth one finally worked. The girl at the return desk said they get a lot of returns on them. If I did not have to fit the hole in my lamp post there's no way I would keep using them. February 18, 2015
Rated 5.0 out of 5.0 by Photo Eye Replacement Extremely easy to install to our lamppost and saves on lighting expense. July 8, 2015
Rated 4.0 out of 5.0 by An indoor photo eye I originally installed one of these in place of a wall switch to light our stairwell theater lamps at night and turn off during the day. It worked well for approximately 3 1/2 years. I then noticed that the lights were staying on continuously and causing the three 7 watt bulbs to burn out rather quickly. I recently replaced the photo eye and we are back up and running. I'm not sure what the life expectancy is on these but hopefully this one will last at least as long or longer. May 6, 2014
  • 2015-11-26 T09:47:55.661-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_25, tr_25
  • loc_en_US, sid_100671538, prod, sort_default
2 >>