NuImage Awnings 7 ft. 3500 Series Aluminum Window Awning (28 in. H x 24 in. D) in White-35X6X8401XX05X at The Home Depot
Free shipping

NuImage Awnings

Model # 35X6X8401XX05X

Internet # 100374125

7 ft. 3500 Series Aluminum Window Awning (28 in. H x 24 in. D) in White

NuImage Awnings 7 ft. 3500 Series Aluminum Window Awning (28 in. H x 24 in. D) in White

This item has been discontinued.
The Home Depot no longer carries this specific product.

$299.00 / each
Item cannot be shipped to the following state(s): GU,PR,VI


In Stock



Model # 35X6X8401XX05X

Internet # 100374125

Store SO SKU # 342958

This strong aluminum window awning is designed to protect your windows and furnishings from the elements and from fading due to the sun. It will also reduce your summer cooling costs up to 20%. All window awning undersides are powder coated white. Your aluminum window awning is shipped partially assembled, with all the necessary hardware for quick and easy installation. NuImage Awnings Aluminum Window Awning has a 5 year warranty against manufacture defects. Manufactured and assembled in the USA.

  • 84 in. Width
  • Designed for windows 49 in. to 60 in. height
  • Polar white finish
  • Includes vented side panels for proper airflow
  • Aluminum framework will never rust
  • Installation is permanent, no put up and take down expense


Assembled Depth (in.)  24 in  Assembled Height (in.)  28 in 
Assembled Width (in.)  84 in  Assembly Required  Yes 
Backlit  No  Color  White 
Color Family  White  Commercial / Residential  Residential 
Frame Material  Aluminum  Manufacturer Warranty  5-Years 
Minimum clearance requirement (in.)  2.0  Minimum mounting height (in.)  2.0 
Mounting space required (in.)  2.0  Outdoor Living Product Type  Fixed Awning 
Product Height (in.)  28.0  Product Length (in.)  24 in 
Product Weight (lb.)  24 lb  Product Width (in.)  84 in 
Projection from wall (in.)  24.0  Returnable  90-Day 
Rust Resistant  Yes  Striped  No 
Water Resistant  Yes  Weight Capacity (lb.) 


Rated 4.5 out of 5 by 21 reviewers.
Rated 2 out of 5 by difficult assembly metal pieces that were supposed to fit inside mounting bar were the same size. Had to pry open wider with a pliars and re-drill. Had to use a mallet to secure the sides. A definite 2-man job to assemble and install but do like finished product. September 11, 2011
Rated 5 out of 5 by Aluminum Window Awning So easy to assemble.Took two people because it was for a large window but instructions were easy to read and went up easily. Attached to wall and is very sturdy and well built.Now want to get Door Awning because so pleased with this one. October 19, 2006
Rated 5 out of 5 by Light weight makes installation a snap Overall, I'm very pleased with this product. Initially, I purchased three of them to install for a client. Assembly took some patients and some of the factory-drilled holes didn't line up but that was the only con I could see. The aluminum makes it easier to drill your own holes if you have to and the light weight makes it easier to install from a ladder. You only need one hand to hold it while setting it into the groove in the mounting bar. The client was so pleased with their appearance and performance that he ordered two more. Great product! June 27, 2013
Rated 5 out of 5 by Excellent Product I installed 3 of these awnings on the house. They were Delivered in the stated time without any damage. Minor assembly was required but very easy and minimum time. Installation was not hard. You can really tell a big difference in the amount of heat and light cut down on the windows! We have been very please! Experienced severe thunder storms and high winds without any problems noted to awnings. August 7, 2012
Rated 4 out of 5 by Some assembly required If I were to rate the quality of materials and overall appearance of the finished mounted product, these awnings would get 5 stars. But there are some assembly problems that require a little skill and ability to solve issues on the spot. In particular, the side rails are somewhat difficult to install, and the screws that are supposed to attach the shade face-on to these rails do not accomplish this function. When mounting the awning to the building, the holes in the rail on the wall mount are supposed to allow four screws to pierce the matching holes on the rear rail on the shade. Accomplishing this part of the operation is extremely difficult. The mounting process requires these four screws and two wood screws (those attaching the side panels to the building) with hardly any work space for tools and knuckles. But if you can get beyond these problems the results are very attractive. A quality product, but if you are not handy, you could wind up rather frustrated. July 1, 2010
2 3 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.