0784891256226

NuTone

Model 763RLN

Internet #100056304

Store SO SKU #1000686335

50 CFM Ceiling Exhaust Bath Fan with Light

$29.58 /each
  • Operates at 2 - 2.9 sones
  • Permanently lubricated motor and high-efficiency impeller
  • White polymeric grilles and classic design complement any decor

Frequently Bought Together

Product Overview

The NuTone 50 CFM Bath Fan with Light combines efficient air circulation and up to 100-Watts of ceiling light in 1 easy installation. The fan and light operate separately or together and are housed in a classic white design that complements any decor. The high-efficiency polymeric impeller and 50 CFM speed are ideal for bathrooms up to 45 sq. ft. or other rooms up to 60 sq. ft.

  • 50 CFM fan speed circulates the air and helps reduce moisture in the bathroom
  • Ideal for bathrooms up to 45 sq. ft. or other rooms up to 60 sq. ft.; not recommended for kitchens
  • Uses one bulb up to 100-Watts (not included)
  • UL and CSA listed for safety and performance
  • Use in tub or shower enclosure with GFI branch circuit wiring
  • 4 in. duct

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

14 Questions27 Answers

Customer Questions & Answers

50 CFM Ceiling Exhaust Bath Fan with Light
50 CFM Ceiling Exhaust Bath Fan with Light

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
5 answers

i want to update my fan but there is no wood framing around the opening. What is the best way to update without taking down drywall to frame.?

This question is from 50 CFM Ceiling Exhaust Bath Fan with Light
Asked by
luckyducky
wa
December 19, 2011
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Western New York, USA
Read all my Q&A
February 26, 2013
Answer: 
You really only need one wood support on the side that you are going to attach(screw) the fan to. Just scab a board on the one side and toe nail or screw it in place, then attach as per instructions.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Asheville, NC, USA
Read all my Q&A
June 21, 2012
Answer: 
You need to use hanger arms that extend from the unit and hold it up. This method is similar to what I call a butterfly bolt.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Central Valley, California, USA
Read all my Q&A
March 19, 2012
Answer: 
If you can get into the attic, create a frame between the ceiling joists using a 2x4. Remember you have to frame it so that you can run an exhaust duct, On side should be enough, it has a nailing bracket on only one side. That's how I had to do mine and it works fine.
You can use metal framing brackets to hold the 2x4's if access is difficult.
you said update....You might be able to replace the fan Read More
If you can get into the attic, create a frame between the ceiling joists using a 2x4. Remember you have to frame it so that you can run an exhaust duct, On side should be enough, it has a nailing bracket on only one side. That's how I had to do mine and it works fine.
You can use metal framing brackets to hold the 2x4's if access is difficult.
you said update....You might be able to replace the fan assembly if it's from the same manufacturer. You simple take the old assembly out and put the new one in it's place. I wonder how the old one is held in place if there isn't any framing. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
February 4, 2012
Answer: 
If you can't get into the attic to frame, you would need to pass the boards up through the hole and try to scab on to an existing beam. If neither of these options are viable. There is no other option that to tear down the drywall.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

December 20, 2011
Answer: 
Thank you for your interest in our product.
There isn't an easy-to-expain (in writing) answer for your question.
Please contact our Technical Service department at 888-336-6151 for step-by-step installation information and advice. They will also be able to answer any additional installation questions you may have.
+1point
3out of 5found this answer helpful.
Was this helpful?helpful3unhelpful2
 
4 answers

Can I use a separate switch for fan and light

This question is from 50 CFM Ceiling Exhaust Bath Fan with Light
Asked by
San Diego
Read all my Q&A
November 5, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Read all my Q&A
November 8, 2014
Answer: 
Yes
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
COLORADO SPRINGS, CO
Read all my Q&A
April 15, 2014
Answer: 
No - there is only 1 switch.
-9points
1out of 11found this answer helpful.
Was this helpful?helpful1unhelpful10

Asked by
Atlanta
Read all my Q&A
January 27, 2014
Answer: 
Yes - this fan comes with two wiring options, you can either run the fan and light separate or together. The wires come separated.
+3points
5out of 7found this answer helpful.
Was this helpful?helpful5unhelpful2

November 6, 2013
Answer: 
Yes, the fan and light can be on separate switches.
+4points
5out of 6found this answer helpful.
Was this helpful?helpful5unhelpful1
 
3 answers

What type of light bulbs can be used in this fan?

This question is from 50 CFM Ceiling Exhaust Bath Fan with Light
Asked by
Jamestown, NC
Read all my Q&A
September 8, 2015
What type of light bulbs can be used in this fan? I see the maximum wattage up to 100w but not the TYPE of bulbs that can be used. The light just burnt out with 3 months of installation and I would like to replace this with a bulb that can last a LONG time!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Muncie, IN
Read all my Q&A
Home Improvement Profile: DIYer
January 29, 2016
Answer: 
I had difficulty installing a LED bulb because it's a little larger than incandescent bulbs. Bending the support in the lamp housing allowed enough space. A compact CFL may fit but not the large spiral ones. LED bulbs are affordable now (less than $2) so it's silly to buy anything else.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

September 11, 2015
Answer: 
This product uses a 100 watt incandescent bulb.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

September 9, 2015
Answer: 
Thank you for your question. The 100 Watt bulb is an incandescent. The unit is U.L approved for the incandescent. You could possibly use a fluorescent, and while their rating might be a lower wattage, check the package to see how it compares to regular incandescent. But the unit is NOT U.L approved for a different type of bulb, so we can ONLY recommend the incandescent. Thanks, again.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
 
2 answers

I have a small bathroom 5ft w x 8ft L x 10 ft H. is this addiquate to replace existing similar size unit?

This question is from 50 CFM Ceiling Exhaust Bath Fan with Light
Asked by
MO
Read all my Q&A
January 18, 2016
similar size existing opening.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

January 28, 2016
Answer: 
Yes, this would be an adequate fan for the bathroom size.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 19, 2016
Answer: 
It should work for you, but the 769RL will probably work a little better.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-29 T13:45:19.252-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100056304, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.5 out of 5 by 104 reviewers.
Rated 4.0 out of 5.0 by nutone alwasys has a good fan for the money these fans are great for the price,the sonse are high but not really noise if you want real quite, than you will have to spend more money!!! March 29, 2016
Rated 4.0 out of 5.0 by Great Replacement Fan The fan was for replacement of the same older type. The pricing was of good value. The metal housing did arrive with a slight bend. Was not a problem to bend back into position and did not effect the running or appearance of the fan. Solved a major problem of an older fan. March 8, 2016
Rated 4.0 out of 5.0 by Great buy. Works very well. Needed to replace fan/light in bathroom (fan had stopped working). Pretty much a spot-on well-functioning replacement fixture. Recommended. February 16, 2016
Rated 1.0 out of 5.0 by This fan is NOISY!!!!!!!!! Easy to install--Looks clean But....Noisy as heck!!!!! February 16, 2016
Rated 5.0 out of 5.0 by Easy to install, works well with the drop ceiling and Regular Ceiling. I have installed these in both drop ceiling and regular ceiling and it work in both setting as long as you have support to mount the fan to in the drop ceiling. March 12, 2016
Rated 4.0 out of 5.0 by Good Buy Instructions made fore easy installation the only part that I didn't like was the hose connector part needs some ribs for the hose clamp to grip, ended up duct taping hose on as clamp and hose would slip off March 1, 2016
Rated 5.0 out of 5.0 by LED lamp compatable Unlike the special CFL bi-pin lamps in lighted fans that can only take a special and expensive CFL Lamp, these fans will take any of the smaller LED edison Based 110 volt screw in lamps to save money. The trim with lamp and fan fits older Nutone rough in boxes and can be swapped out with just a screw driver. February 16, 2016
Rated 4.0 out of 5.0 by Good so far It works for me. A bit of noise but not bather me at all. February 16, 2016
  • 2016-08-29 T13:46:14.741-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_104, tr_104
  • loc_en_US, sid_100056304, prod, sort_default
2 3 4 5 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 49ms
  • REVIEWS, PRODUCT