Free Shipping and BOPIS
Discontinued

NuTone

Model # 665RP

Internet # 100198855

Store SKU # 562501

70 CFM Ceiling Exhaust Fan with Light and 1300-Watt Heater

This item has been discontinued.
The Home Depot no longer carries this specific product.

$79.86 /each
  • Ventilates rooms up to 60 sq. ft. in area
  • 70 CFM reduces moisture to prevent mildew growth
  • Fan-forced heating provides optimum performance in smaller space
Loading...

PRODUCT OVERVIEW

Model # 665RP

Internet # 100198855

Store SKU # 562501

Store SO SKU # 148633

Get more out of your bath fan with the NuTone 70 CFM Bath Fan with Light and Heater. The fan evenly distributes warm air throughout the room for efficient heating, and the 100-watt light fixture provides extra light where you need it. The included hanger bar locks it into position after securing the unit to the rafters, providing quick and confident installation.

  • Operates at 4.0 sones
  • Uses one 100-watt bulb concealed by a convenient light lens that snaps on and off
  • White polymeric grille for a classic look
  • UL-listed and HVI-2100 certified for added safety and performance
  • Designed for easy installation with 4-way adjustable hangar bars and mounting clips
  • 4 in. duct
  • Home Depot Protection Plan:

    Home Depot Protection Plan

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Maximum Room Size (ft sq) 
60 
Product Depth (in.) 
5.625 
Product Height (in.) 
5.625 
Product Length (in.) 
14.625 in 
Product Width (in.) 
7.875 in 
Details
Air Volume (CFM) 
70 
Area Heated (Sq. Ft.) 
Bulb(s) Included 
No 
Ceiling or Wall Installation 
Ceiling 
Color Family 
Whites 
Color Family 
White 
Fan Sound Level (Sones) 
4.0 
Features 
Heater and Light 
Housing Material 
Galvanized Steel 
Humidity Sensing 
No 
Light 
Yes 
Motion Sensing 
No 
Mounting Style 
Recessed 
Nightlight 
No 
Number of Bulbs Required 
Product Weight (lb.) 
10 lb 
Recommended Bulb Type 
100 watt incandescent 
Remote Control 
No 
Returnable 
90-Day 
Timer 
No 
Wattage (watts) 
100 
Warranty / Certifications
Certifications and Listings 
1-UL Listed,HVI Certified 
ENERGY STAR Certified 
No 
Manufacturer Warranty 
Limited one year 

CUSTOMER REVIEWS

Rated 3.6 out of 5 by 90 reviewers.
Rated 3.0 out of 5.0 by the product performs the tasks installation was easy enough. product is still a little loud. this was a replacement install so it retrofitted easily. the housing of the unit is considerably thinner which probably accounts for the increased noise July 14, 2015
Rated 4.0 out of 5.0 by Bath exhaust and heater! Easy install, just needed two lines so the fan and heater are controlled by separate wall switches. Effective exhaust and great heat but both have a noticeable fan sound. Not loud but definitely noticeable. February 25, 2015
Rated 2.0 out of 5.0 by Light bulb burns light lens I put the recommended light bulb in the socket and in short order it burned a hole in the light lens. Otherwise everything else seems to work fine. June 16, 2015
Rated 1.0 out of 5.0 by Peice of Garbage This thing has failed completely TWICE in only seven years. After about a year, the heater went out. We lived with that for 2 years since we didn't use it much. later the fan went out. I bought another identical unit to pulled the guts (cheaper then buying parts separately) I figured I was good to go. Well, another year later, the heater failed again. It blows for 10 seconds and fails. And now, the fan is making a lot of noise. I pulled the cover to see that the plastic has gone brittle and broken, allowing the fan to rattle around. Also, it has rust all over, any genius would have known to use stainless steel or aluminum. NOTE the cracks and rust after 7 years (or 3 if you count the replacement) I called NuTone to complain and they offered to sell me more low quality parts. When I explained FOUR failures in 7 years is not acceptable and I wanted parts for free this time, they asked for receipts...Who keeps receipts for stuff like this? Low Quality unit. It will be tough, but I will find a different brand unit that fits the same big hole... STEER CLEAR OF THIS unit October 8, 2012
Rated 2.0 out of 5.0 by Quality going downhill Replaced a 20yr old 665N model (no repair parts or extremely expensive), and you'd think they would keep the interior parts the same size - but no. The new construction is very flimsy compared to the old unit. In order to get the heater to work you have to replace the whole unit - which in our case means lifting a part of the roof to gain access to the cathedral ceiling space. Not easy. Once you get it in the heater lasted all of 6 months before burning out. I'm looking at replacing 3 more of these units in our house and shop also. They all broke at the same time. Never again - NuTone has really gone down hill. This product is a real disappointment - will never buy this brand again. December 24, 2014
Rated 1.0 out of 5.0 by Where do you get parts? We have had the Model 665RP for a few years, recently the heater would not work so we were trying to find parts. When I went into the main page showing the Model 665 and clicked onto "where to get parts" the website tells me there isn't a model 665RP. I guess the answer is to go to a different company that will have replacement parts! March 28, 2015
Rated 5.0 out of 5.0 by Heater worked great for 10 years!!! I was surprised to see this model is still available. I have had it running in our master bathroom for ten years, and the heater went up in early spring. For the money this is a real work horse and the bulbs are easy to change. The fan is a bit noisy, but really I can't hear it over the shower running, and once I get out of the shower I typically turn the heater off anyway. Also the light is not my primary source of lighting as we have an array of vanity lights over the master mirror. I'm not taking any chances, and going out today to buy this one again because I know it works and it will fit the current opening (yeah from a DIYer). June 30, 2012
Rated 3.0 out of 5.0 by loose connection I'm writing this review because I have read about the heater going out in other reviews. I had this happen, but it is not the heater element, it is a bad connection that will fail over time. the Overload wire connection is rivoted to the element bracket. The rivot will become hot and lose the ability to conduct properly, which raises the temperature right next to the element causing it to trip. Long story short, drill out the old rivot and replace with a small screw....works like a champ now. January 12, 2013
  • 2015-07-29T12:07:39.274-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_90, tr_90
  • loc_en_US, sid_100198855, prod, sort_default
2 3 4 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.