Model # 8664RP

Internet #202241423

Store SO SKU #1000406083

NuTone Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light
0784891216251

NuTone

Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light

  • Helps reduce bathroom moisture
  • Fan operates quietly
  • Made with high quality
$100.74 /each

Frequently Bought Together

Product Overview

Powerful Deluxe Fan-Light Combination unit quietly removes stale, steamy air. The round design eliminates squaring with bathroom walls. Durable centrifugal blower wheel quietly delivers superior ventilation. Built for unsurpassed quality and dependability.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

Price
$58.78 /each
$100.74 /each
$101.15 /each
$154.85 /each
Name 70 CFM Ceiling Exhaust Fan with Light Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light 100 CFM Ceiling Exhaust Bath Fan with Light InVent Series 110 CFM Ceiling Exhaust Bath Fan with Light
Brand NuTone NuTone Broan NuTone
Ratings (138) (30) (1) (1)
Maximum Room Size (ft sq) 60 90 95 100
Bath Fan Features Light Light Light Light
Fan Sound Level (Sones) 3.0 3.5 3.5 1.3
Housing Width (in.) 9 9 9 10
Ceiling or Wall Installation Ceiling Ceiling Ceiling Ceiling
Housing Length (in.) 9 9 9 9.25
Air Volume (CFM) 70 100 100 110
View Product View Product View Product View Product

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

14 Questions27 Answers

Customer Questions & Answers

Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light
Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

How do you access globe to change light bulb?

This question is from Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light
Asked by
Chip
December 17, 2011
need to change the light bulb.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Chicago, IL
Read all my Q&A
Home Improvement Profile: DIYer
August 10, 2015
Answer: 
To access the light bulb, just pull the grill away from the ceiling. Then squeeze each set of prongs together to remove the grill for full access.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Mass
Read all my Q&A
October 4, 2012
Answer: 
there are two tension clips on either side of the globe. Find one and pull straight down on both sides. It helps if you are on a step ladder and can see the tension clips that will pull down with the "globe".
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
Homer, AK, USA
Read all my Q&A
May 11, 2012
Answer: 
You have to gently grab the plastic Grill on opposite sides and pull down slightly about 2 to 3 inches from the ceiling. There will be 2 metal spring forks holding up the Grill that will need to be pressed inwards by pressing your index and thumb together and guide the spring forks out of the slot in the metal fan housing. Once the grill is removed the light bulb is accessable to replace.
To reinstall
Read More
You have to gently grab the plastic Grill on opposite sides and pull down slightly about 2 to 3 inches from the ceiling. There will be 2 metal spring forks holding up the Grill that will need to be pressed inwards by pressing your index and thumb together and guide the spring forks out of the slot in the metal fan housing. Once the grill is removed the light bulb is accessable to replace.
To reinstall the Grill just press the spring forks inward again and line them up to the housing slots. Slowly push the Grill upwards and the forks will spring open (outward) in the housing slots and lock the Grill in place. All done!
Read Less
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

December 19, 2011
Answer: 
Hi, Chip. Thank you for the question. The Grille and lens assembly are 'spring loaded'. From a secure stepping stool/ ladder, gently pull the grille downward. Use caution as the globe is NOT glue in. The spring is a 'V-shaped' and will require that you use a bit of force to pull it down. Again, use caution here. You squeeze the springs together and pull out the complete grille and lens assembly. Change Read More
Hi, Chip. Thank you for the question. The Grille and lens assembly are 'spring loaded'. From a secure stepping stool/ ladder, gently pull the grille downward. Use caution as the globe is NOT glue in. The spring is a 'V-shaped' and will require that you use a bit of force to pull it down. Again, use caution here. You squeeze the springs together and pull out the complete grille and lens assembly. Change the bulb. Clean the grille and lens with mild soap. Dry it completely and replace. If you have further questions and would like to speak with a Customer Service person, dial 888-336-3948. Thanks, again. Read Less
+6points
7out of 8found this answer helpful.
Was this helpful?helpful7unhelpful1
 
3 answers

Can the light be switched on/off separately from the fan using dual wiring and switches?

This question is from Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light
Asked by
Tampa, Florida
Read all my Q&A
February 25, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
December 15, 2015
Answer: 
Yes, there are two separate connections: one for the blower motor and one for the light.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Chicago, IL
Read all my Q&A
Home Improvement Profile: DIYer
August 10, 2015
Answer: 
The instructions show how to wire the fan and light to separate wall switches.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 25, 2015
Answer: 
Yes, the light can be wired to operate separately from the fan.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Can this item be installed without having to go up in the attic.

This question is from Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light
Asked by
Bill
January 25, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Youngstown, OH, USA
Read all my Q&A
January 17, 2014
Answer: 
If you are using it in a bathroom with a shower or tub, you would need to vent this to the outside of your house. We have it vented into the attic, where there is a vent to the outside. If you wanted to use it between floors, I was told there would need to be a gap in the ceiling to accommodate the vent tubing.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Wilmington, DE, USA
Read all my Q&A
May 14, 2013
Answer: 
If there was no fan there previously, than no, you must go up into the attic to properly vent it. If you are replacing an existing fan, you just need to hook it up to the vent already there.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

January 28, 2013
Answer: 
You can download the install guide on www.nutone.com & on page 3 gives the installation from area below ceiling. If you need additional information our technical service number is 1-888-336-6151.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

Can this replace an older model of the same?

This question is from Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light
Asked by
ME
Read all my Q&A
May 7, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 11, 2016
Answer: 
It can, but it may not fit exactly the same. For additional assistance, please contact our Customer Service Department at 888-336-3948.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 11, 2016
Answer: 
Dear Valued Home Depot Customer,
We reached out to MFG for more information and below is their response.
" It can, but it may not fit exactly the same. For additional assistance, please contact our Customer Service Department at 888-336-3948. "
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:31:35.309-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202241423, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 155ms
  • QUESTIONS, PRODUCT

Customer Reviews

Decorative White 100 CFM Ceiling Exhaust Bath Fan with Light is rated 3.0 out of 5 by 30.
Rated 2 out of 5 by from Works but not the best design The fan does a better job than the previous one at keeping the mirrors clear. Note that the light socket only has room for incandescent bulbs, CFLs won't fit. There is another bigger gotcha though. The instructions say to push the grille flush to the ceiling but the edge of the metal housing hits the ribs of the plastic mold in eight places making that impossible. The end result is the grille does not fit snug against the ceiling and protrudes from the ceiling about half an inch. That creates a halo of light around the edge of the grille but even worse the grille make an irritating buzzing sound from the fan's vibration.
Date published: 2016-08-29
Rated 4 out of 5 by from My customer was looking for a round fan with at least 100 cfm. The fan was easy to install even... My customer was looking for a round fan with at least 100 cfm. The fan was easy to install even from below. The round trim is held together with 2 screws allowing it to be removed while installing the fan. After the fan is installed , the ceiling can be cut to allow the round trim to be installed. Be sure the hole in the ceiling will allow the trim to be easily re-installed otherwise it will bend and warp. The fan had little vibration.
Date published: 2017-01-03
Rated 4 out of 5 by from A LITTLE NOISY BUT NOT BAD, MOVES THE SHOWER STEAM VERY WELL. IT'S OUR SECOND ONE, THE FIRST ONE ... A LITTLE NOISY BUT NOT BAD, MOVES THE SHOWER STEAM VERY WELL. IT'S OUR SECOND ONE, THE FIRST ONE WENT ABOUT 10 YEARS.
Date published: 2016-12-09
Rated 4 out of 5 by from great product almost same size of old one ,easy to ,good looking.
Date published: 2016-08-16
Rated 3 out of 5 by from When it works it great but when it doesn't! No overall complaints with the unit as it has been running for a few years. It became noisy recently and apparently a sign of malfunctioning. It looks good cosmetically in the bathroom and pulling the dwon the cover isn't difficult but the spring loaded sides can become a problem with tension on the frame. Although it's rated as a 100cfm it seems that optimum ST is 90sf. We have 97sf and one wouldn't think it would be a problem but steamed mirrors and mildew growth indicates otherwise. It could be the blower wheel or motor but the overall quaility & reliability seems to be average..
Date published: 2012-10-04
Rated 5 out of 5 by from Classic looks, fairly east to install. Just want customers to know that the hole diameter (round) in ceiling Drywall needs to be about 11 1/2 inches and the Grill will cover 15 inches when installed. Also note that Broan has this exact same product only they call it Model 751.
Date published: 2012-05-11
Rated 1 out of 5 by from Way too noisy This was a replacement for an old Nutone fan that was no longer working very well. Rather than replace the motor, I opted to replace the entire unit. This unit has almost exactly the same dimensions, and a nicer grill and light surround so I chose it. Removal of the old unit was the most challenging since it had to done without access to the top (first floor bathroom). Installing the new unit was challenging as the beam to which it was attached was not upright (on the 4" side). The real issue with this unit is the NOISE. It is very noisy and the motor (although shock mounted) vibrates the entire enclosure as well. The only pluses for this unit are: nicer surround and easier installation since the dimension are almost exactly the same as my 30 year old Nutone fan.
Date published: 2015-12-15
Rated 5 out of 5 by from perfect replacement well packaged , delivered to incorrect address and a little difficult to install but the product is everything that was expected .
Date published: 2016-06-24
  • y_2017, m_1, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_, sid_202241423, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • REVIEWS, PRODUCT