Free Shipping and BOPIS


Model # 10112W

Internet # 100373153

1/2 in. PVC Split Sections with Mist Nozzle

This item has been discontinued.
The Home Depot no longer carries this specific product.

$8.49 /each



Model # 10112W

Internet # 100373153

The Orbit 1/2 in. PVC Split Section with Mist Nozzle can be used with 1/2 in. PVC Sched. 40 pipe (not included) to extend a 1/2 in. PVC misting kit up to a maximum of 250 ft. This split section is a slip x slip fitting and provides up to 2 ft. of mist cooling capability.

  • Use with 1/2 in. PVC Sched. 40 pipe (not included) to create a durable mist system that can be extended up to 250 ft.
  • Section is a slip x slip fitting and provides up to 2 ft. of mist cooling capability
  • Durable PVC construction
  • Brass and stainless-steel mist nozzle
  • Requires PVC cement (not included) for water tight operation
  • Note: Product may vary by store.


Assembled Depth (in.) 
1.25 in 
Assembled Height (in.) 
8.75 in 
Assembled Width (in.) 
3.0 in 
Length of Pipe/Tubing Included (ft.) 
Nozzle Spray size (in.) 
Pipe diameter (in.) 
Maximum Pressure (PSI) 
160 psi 
Nozzle Material 
Brass and Stainless Steel 
Pipe/Tubing Material 
Pressure System 


Rated 3.7 out of 5 by 3 reviewers.
Rated 5.0 out of 5.0 by Used these for years I used these for years around dog kennels and they worked fine. if they started getting clogged took the nozzle out soaked it in vinegar and water then put it back it worked fine. Have used some to make my own misting fan works great just remember to put where the water connects below the motor. When you glue them together remove the nozzle to make sure you don't get glue in it. July 2, 2014
Rated 5.0 out of 5.0 by Works for me Instead of buying a misting system. I purchased these and some 1/2 inch PVC pipe. I was able to custom build the system the way I wanted it. I had no issues with the nozzles being clogged or spraying bad. They worked perfectly for me. The only downside is that you are going to have to glue them, and when gluing them be very careful or the glue will plug the nozzle. I have used my mister for a year now without a single problem or cloged nozzle. June 2, 2014
Rated 1.0 out of 5.0 by pricy and don't spray, disappointing. these tips are sold along side the Orbit kit as expansions. they are different in design to the tips in the kit and they all didn't work, they were either clogged or dripped or sprayed a stream which is too much. and since these are PVC and need to be glued, it's alot of work to find that they don't work. July 2, 2013
  • 2015-09-03T16:42:41.824-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_100373153, prod, sort_default
1-3 of 3