0046878279452

Orbit

Model 27945

Internet #100659290

Store SKU #258584

5/8 in. Inline Male Metal Mender

$3.58 /each

Frequently Bought Together

Product Overview

The Orbit 5/8 in. Aluminum Hose Mender Helps extend hose life by repairing damage to outdoor hoses. The 3-piece mender features a stainless steel clamp. This provides quality corrosion resistance.

  • To be used outdoors with cold water only
  • Stainless steel clamp is corrosion resistant
  • Creates value by extending the life of an outdoor hose
  • Used to repair cut or torn hoses
  • Note: Product may vary by store

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions4 Answers

Customer Questions & Answers

5/8 in. Inline Male Metal Mender
5/8 in. Inline Male Metal Mender

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 5/8 in. Inline Male Metal Mender
 
3 answers

for the hose mender do I measure ID or OD?

This question is from 5/8 in. Inline Male Metal Mender
Asked by
Les
Casa Grande, AZ
January 21, 2013
Not sure what size to buy
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
ct
Read all my Q&A
January 25, 2014
Answer: 
The ID because the OD varies from hose to hose depending on the thickness of the hose it self.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Baton Rouge
Read all my Q&A
December 6, 2013
Answer: 
I/D most water hoses or 5/8" if it is a real heavy hose is going to be a 3/4" and your probably not going to cut it. Just remember all the water hoses or pretty tough but some have steel belts around them so that would make your OD bigger but your ID is still 5/8"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 24, 2013
Answer: 
Hi Les. Measure the ID for effective use of the hose mender. Have a good day!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 5/8 in. Inline Male Metal Mender
 
1 answer

med my water hose

This question is from 5/8 in. Inline Male Metal Mender
Asked by
new jersey
Read all my Q&A
August 22, 2015
my hose is 3/4 does that mean 5/8 on the inside I had a leak and cut the bad part out now I must join them what size joiner should I buy thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 24, 2015
Answer: 
joan, you will need either a 3/4" shank mender or a 5/8-3/4" zinc mender (Orbit 56687). Please feel free to contact our Support team at 1-800-488-6156 if you have any other questions at all. Thanks!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-08-24 T15:15:36.117-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100659290, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 5 reviewers.
Rated 4.0 out of 5.0 by Product is good but not Home Depot Product is good. Easy to use but I had to drive to the store and came back without it because the information on web is behind the time. August 15, 2016
Rated 5.0 out of 5.0 by Very easy way to fix cut water hose. I had two 100' hoses with bad beds one was the bib side the other was the nozzle side. I cut both bad ends off and made a 200' hose. The only thing I would tell you is use some kind of lube in the hose and on the coupler. If it's cold out warm up the hose with a torch or hair dryer makes it a lot easier to install. I just put a snug turn on the clamps and tested it no leaks. Now I can bring the pressure washer all around the house without moving the hose to a different spigot. December 6, 2013
Rated 4.0 out of 5.0 by Review of portable mister Products works as advertised.. I would like to see a model that a battery that ran a small motor that produced additional pressure. July 24, 2014
Rated 3.0 out of 5.0 by Suggestion In response to TimHBTR52, I would avoid the lube. If you heat a cup of water in the micro (or stove), soak the hose for 30 seconds or so, this will make the rubber pliable and installation easier. February 2, 2014
Rated 5.0 out of 5.0 by better than plastic type these will not get hard and brittle and break due to the age January 21, 2014
  • 2016-08-23 T12:42:52.132-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_100659290, prod, sort_default
1-5 of 5
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 118ms
  • REVIEWS, PRODUCT