Rated 4.9 out of 5 by 9
Rated 5.0 out of 5.0 by Stingray PC-11
I used this product on a vertical surface as advertised and it worked. No sag or drips, it is amazing stufff. I would recommend it to anyone needing an epoxy. Put it on the outside transom of an old Snark sailboat I bought. Spread a coat of epoxy. Then squeeged in some fiber glass cloth and another top coat and let dry. Just wear gloves. It is some sticky stuff.
October 11, 2016
Rated 5.0 out of 5.0 by Patriarca Very easy to use
I purchased this product to repair the hull of my snark sail boat. The mixture was very easy to apply and it is curing as indicated in the instructions. E only issue I had is the difficulty to mix the two componeents. I also would like to see the option to control how thick you want the mixture. It olso needs instruction how to clean up your tools after completating the job.
i am happy with the product. Still to see how it behaves once I start sailing again.....next summer.
October 12, 2015
Rated 4.0 out of 5.0 by Miguel Paste Epoxy
Used to repair broken plastic parts. The product works just as it is described by the manufacturer. Personally, I needed to sand in 12 hours and by that time the product was not compleatly hardened. If you have enough time, this product would repair anything in a perfect manner.
November 11, 2014
Rated 5.0 out of 5.0 by BoatRepair Great for boats
This epoxy is easy to mix and sets well. Used it to repair a crack on the side of my boat and to fill several holes in the gel coat.
Give it an hour to set and come back with a rag and Xylene and wipe of the excess before it sets. great results. If it hardens prepare for a lot of sanding.
April 21, 2014
Rated 5.0 out of 5.0 by GTack Great Product
The first product I used was PC-7 and was very pleased with that product so I tried the PC-11 and was very happy with this product as well. This two part product dries white and bonds to just about everything. I used it to patch some screw holes in a fiberglass column and the PC-11 worked even in cold snowy weather.
December 20, 2011
Rated 5.0 out of 5.0 by Joseph Used for pool tiles
I have an older in ground pool in which the perimeter tiles have been falling off. Regular thinset was not working so I tried this product. Easy to use and mix. So far all the tiles are holding, clean up was relatively easy for a two part epoxy product.
August 21, 2012
Rated 5.0 out of 5.0 by JDMcPerson Absolutely perfect product for the intended use!!
Easy to mix 50/50 portions.
Plenty of time for use after mixing.
Easy to apply in a wet environment.
Relatively easy cleanup (gets quite sticky).
March 21, 2012
Rated 5.0 out of 5.0 by Verified Reviewer Excellent product
Needed product to repair water feature statues. Easy to apply and work with. So far has performed as expected.
May 17, 2011