PC Products PC-7 Paste Epoxy 1/2 lb.-087770 - The Home Depot

PC Products

Model # 087770

Internet # 100649631

PC-7 Paste Epoxy 1/2 lb.

PC Products PC-7 Paste Epoxy 1/2 lb.

This item has been discontinued.
The Home Depot no longer carries this specific product.

$12.99 / each


Model # 087770

Internet # 100649631

PC-7 is a heavy duty paste epoxy with unlimited uses for bonding, sealing and filling that is designed for the tough job. Formulated for maximum strength, this paste epoxy allows ample working time for large jobs, and cures for service in 12-24 hours. You can shape and mold the epoxy and fill large gaps or voids easily. Simple 1:1 mix. Cured epoxy can be drilled, machined, tooled and painted. No job is too big for PC-7 . Bonds to unlike surfaces. The Powerhouse of Repair Products.

  • Tremendous strength formulated for maximum bonding power
  • Multi purpose paste epoxy that bonds to most surfaces.
  • Non sag non drip makes vertical and overhead applications possible
  • Ample working time for large and critical jobs
  • Available sizes on HomeDepot.com (6oz, 12oz, 48oz, and 96oz)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  2.25 in  Assembled Height (in.)  4.5 in 
Assembled Width (in.)  2.25 in  Product Depth (in.)  12 
Product Height (in.)  Product Width (in.)  2.5 
Adhesion level  High  Adhesive Product Type  Glue/Epoxy 
Curing time (hours)  24  Dries clear  No 
Drillable  Yes  Flammable  No 
Glue/epoxy type  Epoxy/super glue  Hazardous Code  null 
Indoor/Outdoor  Indoor/Outdoor  Moisture Resistant  Yes 
Paint Product Type  Glue and Epoxy  Product Weight (oz.)  8 oz 
Recommended surfaces  Brick,Ceramic,Cinderblock,Concrete,Drywall,Fiberboard,General Purpose,Glass,Metal,Multi-Surface,Painted cement,Stone,Tile,Woodwork  Returnable  90-Day 
Sandable  Yes  Set Time (Min.)  60 
Solvent resistant  No  Stainable/Paintable  Paintable 
UV/sunlight resistant  No 
Warranty / Certifications
Manufacturer Warranty  Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only 


Rated 5 out of 5 by 8 reviewers.
Rated 5 out of 5 by Don't Always Believe Your Plumber! I was able to add a shower fixture to the bathtub in my country home because PC7 was strong enough to seal the fittings and hold. My plumber had given up on the installation and said it couldn't be done, but I did it myself or I should say, PC7 did it! That was almost 30 years ago and it's still holding tight! April 3, 2010
Rated 5 out of 5 by Great product Purchased this epoxy to connect boards while making a door. Needed an extended setup time to ensure that everything was fitting as planned. This epoxy sets up slow which is what was needed. The door set up fine and the corner joinery is strong and "square". If you need a strong epoxy that is not the five minute set up type this is it. September 18, 2014
Rated 5 out of 5 by Product lives up to the manufacturer's description. This is a truly hard epoxy. Very strong, easy to mix, and is apply. Allow recommended time for it to harden to full strength. September 20, 2011
Rated 5 out of 5 by Great Stuff !! When you have a job you don't ever want to do again, this is the epoxy you want to use. I have seen 30+ year old repairs holding up fine. The material around the repairs is failing but not PC-7. September 25, 2012
Rated 5 out of 5 by overall great epoxy plenty of working time.will not run or drip off of your project.does take 24 hours to harden.after a few days will harden like steel. January 31, 2012
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.