Rated 3.3 out of 5 by 6
Rated 2.0 out of 5.0 by Abner Very poor product
This is a very bad stand. The locking mechanism is made of soft metal. The treads strip out when trying to tighten the stand. The bolt that is used for locking in place does not tighten directly onto the inner shaft, but onto a flange that is compressed onto the inner shaft. You really have to tighten the bolt to get the shaft to lock in place. The stand itself does not stand flat on the ground, so it wobbles. I purchased four of them less than a month ago, and two are already useless. I'm going to need to drill out the threads and weld a good nut to the shaft with a good bolt to tighten down. Save your money, there are much better products.
February 7, 2016
Rated 5.0 out of 5.0 by HDallday git er done
all parts included, easy assembly, works like a charm!
February 10, 2015
Rated 1.0 out of 5.0 by mbl1 Junk
Another example of getting what you pay for. The 3-way head does not work well - it's a fight to switch between modes. The ball rollers really don't roll without a lot of weight on them - at least a lot more than a sheet of plywood. The wide roller is wonderful but there is no ramp on the front side so in an outfeed use the board simply rams into the front of the stand and stops never reaching the roller. This is a poorly engineered product produced way too cheaply. Can't recommend it. Spend twice as much and be 100% happy instead of 100% disappointed with these. I have already gotten rid of these.
October 14, 2014
Rated 4.0 out of 5.0 by Fk91701 Great stands, work perfectly for my needs.
These stands are perfect for supporting stock and feeding into my saws for both wood and metal work. The multi directional bearings are not smooth rolling but that doesn't affect my work as I don't need them. I bought these for the single roller and work stop/support capability. The only reason I didn't give all stars was because of the multi direction rollers. Had they left them off, there would be no complaints. If you primarily need the multi to work effortlessly and smooth you'll need to buy something else.
January 27, 2015
Rated 4.0 out of 5.0 by RES Works well
Good medium duty product. Assembles in minutes, easy to switch between roller heads and easy to adjust height. Works well.
March 20, 2015
Rated 4.0 out of 5.0 by riverbum A Good Value
I had difficulty assembling 1 of the units, due to a poorly tapped hole
September 30, 2014