Model # GSSI

Internet #100645165

PRO-SERIES 6 ft. x 6 ft. x 29 in. Multi-Use Drywall Baker Scaffolding with 1000 lb. Load Capacity


6 ft. x 6 ft. x 29 in. Multi-Use Drywall Baker Scaffolding with 1000 lb. Load Capacity

  • All-steel construction for lasting durability
  • Suited for both interior and exterior use
  • 1/2 in. thick wooden deck with steel frame offers solid support
Was  $191.96
$179.00 /each

Save $12.96 (7%)  through 03/02/2017

Frequently Bought Together

Product Overview

Easily access light fixtures and hard-to-reach places on a construction project with the PRO-SERIES 6 ft. Multi-Use Drywall Baker Scaffolding. Featuring steel construction with a powder-coated finish for extra protection and weather resistance, it moves from room to room with four 5 in. swivel locking casters, ideal for painting, patching, wallpapering and hanging drywall. Only 29 in. wide, it fits through standard doorways and can be double-stacked with additional support (sold separately). It can also be combined with additional components to stack the units higher and create a customized interior scaffold system to accommodate any job.

  • Supported by four 5 in. locking swivel casters for easy transport from room to room
  • Durable, powder-coated paint finish in bright yellow for easy visibility
  • 29 in. wide to conveniently fit through standard doorways
  • Supports up to 1000 lbs. for heavy-duty work

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Does this collapse for easy storage?

For example, does the shelf comes off so you could easy store this in the garage?
Asked by: Shank
You can take it apart. Not very hard to put together.
Answered by: UtahSlim
Date published: 2015-12-06

Can this scaffold unit be added to, to make a 3-tall unit safely? I need a rolling scaffold that gets me 15' above ground level.

Hoping to buy 3 of these, and connect them vertically to get me 15' above the ground. Do they interlock vertically, and would a 3-high unit be safe to stand on at the top level? Thank you for your reply. Rand Hall
Asked by: Woody
Woody, I have only used the scaffold stacked two high. With scaffold stacked two high it is secure and steady. The connection between levels is good. Two high gets you about twelve feet. Reaching fifteen feet should not be a problem with two. Outriggers are needed and I like the safety cage, the cage feels good. The scaffold is not very wide.
Answered by: DanT
Date published: 2016-09-24

Can wheels rotate 360 degrees

Asked by: Jj
Answered by: AllieBoy
Date published: 2017-02-07

It looks like the only way to get to the platform is to climb up the outside. Is that safe?

Asked by: MG
Make sure you lock the wheels first. The instructions say to climb over the top of the ladder ends and not swing around the side to get on the platform. I find it easier to use a separate ladder to access the platform. The scaffold is quite heavy and sturdy so there is little chance it would tip over while you climbed it.
Answered by: Jorge69
Date published: 2016-12-06
  • y_2017, m_2, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_45
  • loc_, sid_100645165, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms

Customer Reviews

6 ft. x 6 ft. x 29 in. Multi-Use Drywall Baker Scaffolding with 1000 lb. Load Capacity is rated 4.6 out of 5 by 384.
Rated 4 out of 5 by from perfect with a mod or 2 This is great value for the price. However, to the DIYer it is wobbly. To fix that, I cut 2 6 foot 2x4's and notched the ends out to stablize the legs while on the top platform. Also a ratchet strap helps keep it all together. I works fine with out the add ons, but i am afraid of heights and weigh 285lbs. The platform creeked a bit when I first got on it. Due to my weight, but it held up great. We also made a handrail out of schedule 40 PVC which cam in very handy while painting our 14 foot ceilings. Get it. you won't regret it. Mine is now in the garage doubling as a work bench!
Date published: 2016-05-24
Rated 5 out of 5 by from Excellent scaffold, very easy to assemble. Although scaffold has a small amount of looseness to i... Excellent scaffold, very easy to assemble. Although scaffold has a small amount of looseness to it, it is very secure and stable. If you want to make it more secure feeling, put 4 bolts through the additional side rail holes and secure with nuts - this is a lot cheaper than buying pins with spring clips and is actually more secure. Excellent product with many potential applications aside from the obvious. I ended up buying two and strapped/ bolting them together rather than buying a guard rail. The resulting 6 foot by 60" scaffold was great for doing my 12 foot ceilings and I felt no need for a guard rail!
Date published: 2016-12-27
Rated 3 out of 5 by from Easy to assemble and pretty well built Home Depot got the item to us quickly and efficiently. The product is heavy and the assembly is easy and well thought out. The 3 start review is because one wheel wouldn't go up into the leg without extra work on our part and, more importantly, one of the spring bars (or pins) that holds it together froze up - both problems caused because the metal was crimped. And this is heavy metal. So it wasn't easy to figure out how to deal with the problems. We thought we were going to have to take it back and went to Home Depot to talk about it. They were great. In the end, we decided not to return it (because it is big and heavy and a pain to transport) but we did buy 4 wire pins (extra bolts would also have worked) and double stabilized the cross pieces and platform. The way this works, if one of the spring pins doesn't go into the frame and seat properly - the platform falls to the ground! And the scaffolding pretty much falls apart. The spring pin looked like it was seating, felt like it was, but wasn't due to the manufacturing problems. So, we take extra care and it works out fine. All in all, I recommend it - good price and heavy metal - but I also strongly suggest you use extra bolts or pins, at least one per leg.
Date published: 2016-09-24
Rated 5 out of 5 by from Not sure how I lived without this I'm framing a house and I live on this scaffold. I bought two and I constantly roll myself around on them to access the job on my own "second floor". These are so handy. I attached all the hurricane trusses for a whole house rolling myself along the walls comfortably seated in one spot with all my tools handy. You probably shouldn't do this but I put a ladder on top to add blocking between trusses. I can't believe how many jobs I've done without them. The deck seems a little thin but it's held up just fine. The wheels roll great on concrete and lock easily. They are a little jiggly but totally adequate. I haven't stacked them but probably wouldn't do it without some bracing or the outriggers.
Date published: 2016-10-05
Rated 5 out of 5 by from MORE THAN MULTI I don’t use the scaffold as a platform to stand on and work from. I use it to carry a bundle of woodworking machines that I can then use at my work level. It also has let me create spacious load- bearing platforms for storing tools, jigs, supplies of all kinds, raw materials, work in process and a big bunch of books and magazines. (I notched 2x3” studs near their ends and laid them over two sets of the supporting horizontal bars, four 2x3s to each set of bars, with spacers between them to keep the 2x3s in position, then covered them with ¼” hardboard to provide east-to-reach storage space. The height-extending tubes at the top of the scaffold bump against some shelving I have hanging from the ceiling, so I cut them off.) The scaffold has excellent maneuverability. Those 5-inch wheels do the job for me. (I’m 81 and not as handy at pushing and shoving as I used to be, especially now that I have the unit all loaded up.) I’m a big fan of using powerful little magnets to hang small tools from, and the sides of this steel scaffold are tool-magnet heaven. And those lovely half-inch holes that regulate the main platform’s height are perfect for inserting bolts or dowels to hang tools from, and the rungs running front to back let me turn the scaffold into the Clamp Central that every woodworker needs. In case anyone needs to know, I was able to put the scaffold together without any assistance, although I have to admit that the main platform was a heavy baby. The instruction sheet was useful but not as good as it could be, but the assembly job was not very complicated. All in all, I’m very satisfied with my big and heavy but still nicely maneuverable rolling workplace/storehouse.
Date published: 2016-10-10
Rated 5 out of 5 by from Very pleased My husband and I bought this scaffold primarily for me to use when I paint large murals, although we will use it for projects around the house as well. I am an artist, and although I usually paint oil on canvas, I often paint murals and this scaffold helps me to safely and easily reach the higher areas. The scaffold assembles very easily and is easy to maneuver. I feel it requires two people to assemble, but it assembles in just a few minutes. My husband and I were impressed with how solid and sturdy the scaffold is, and I feel very secure standing on the scaffold and painting.
Date published: 2016-09-19
Rated 2 out of 5 by from I bought two sections as I needed the extra height to work on a Quonset hut I was erecting. Only ... I bought two sections as I needed the extra height to work on a Quonset hut I was erecting. Only one end from each set would accept the wheels, the other end was too tight. This allowed me to get the project done since I could use the two good ends on the lower section, and the other two ends did fit over the posts for use as the upper section - but if I only had needed one section, I would have had to delay the project for a warranty claim to be able to use the wheels. Also, one set of rivets on each platform holding the plywood to the frame was blown out.
Date published: 2016-12-10
Rated 4 out of 5 by from Nice unit for the price. It is a bit wobbly bit seems strong. I crossed some tie down straps and... Nice unit for the price. It is a bit wobbly bit seems strong. I crossed some tie down straps and it made it a lot more solid. It should come with a second set of pins to add safety to the platform. I used some bolts and nuts to secure the wheels and used the locking pins to double lock the platform.
Date published: 2016-12-13
  • y_2017, m_2, d_20, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_384
  • loc_, sid_100645165, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 46ms