0759501110328

Paslode

Model 650385

Internet #100678208

Store SKU #584621

3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box

$59.98 /each
  • Drives nails flush into harder woods
  • Hot dipped galvanized nail provides superior corrosion protection
  • More productivity - fewer jams, fewer misfires

Frequently Bought Together

Product Overview

Paslode 3 in. x 0.120-Gauge Hot Dipped Galvanized 30⁰ Framing Nails are designed and manufactured to match the specs of Paslode framing nailers so your nailer will run smooth, with fewer jams and misfires. Nails drive flush even into the harder woods and LVL's. Plus, Paslode adds a polymer coating around the shanks and heads to reduce staining, streaking and nail discoloration. To experience non-stop nailing, use Paslode Hot Dipped Galvanized framing nails for exterior framing jobs.

  • Use with Paslode 30° framing nailers for interior framing jobs
  • Special polymer coating reduces staining and streaking by 80% compared to other hot dipped galvanized nails
  • Code compliant: ICC ES-3072 - no project delays from failed inspections
  • High corrosion resistance in LVL, including ACQ and MCQ
  • Available in 2 in. to 3-1/4 in. lengths; 0.113 in. to 0.131 in. shank diameters
  • Fewer jams and misfires means more productivity
  • Reinforced round head design for better drive performance in the hardest materials
  • Paper tape collation resists breaking when dropped and deterioration in wet weather - no job site debris to clean up
  • 10% more nails per strip means more time working, less time reloading

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions11 Answers

Customer Questions & Answers

3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box
3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
6 answers

Do these nails fit most nail guns?

This question is from 3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box
Asked by
Jimdog
Richmond Va
June 22, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Anonymous
November 4, 2014
Answer: 
Yes, but the gun needs to be able to load 30º nails.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Birmingham,AL
Read all my Q&A
October 22, 2014
Answer: 
Always found stick to the name brand of the gun and a product that I'm using eliminates hangups and misfires..while these have to paper wrap a lot of them have polyurethane or plastic inserts for feeder
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

July 29, 2014
Answer: 
Yes, these nails will fit "most" nail guns...Providing...The nail gun you want to use these in, accepts the off-set, full nail head -and- accepts a 30 degree papertape strip.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Warrenton, VA, USA
Read all my Q&A
Home Improvement Profile: DIYer
June 29, 2014
Answer: 
All nail guns with the same angle and ability to use 3 inch nails should work. These are off center full heads, so make sure your gun is compatible.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Rich
NJ
December 10, 2013
Answer: 
No. most nail guns are different degrees. Paslode is 30 degrees There are 18 - 21 and somemore
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
June 26, 2013
Answer: 
Hi Jim,
Thanks for your question! These nails are intended for use in 30-degree framing nailers and for outdoor /exterior applications. For optimal performance, Paslode nails work best with Paslode nailers.
Thank you!
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
2 answers

Hi, would this nails fit my cf325? Thanks

This question is from 3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box
Asked by
Read all my Q&A
May 30, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 2, 2016
Answer: 
Yes, these nails can be used with your Paslode CF325 30-degree lithium-ion framing nailer. The maximum fastener length for the CF325 is 3-1/4 inches; the minimum fastener length is 2 inches.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

May 31, 2016
Answer: 
As long as the CF325 accepts a full nail head and a 30 degree paper tape strip it will work.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will these nails work in a Senco FramePro 601?

This question is from 3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box
Asked by
Read all my Q&A
July 31, 2016
I have used clipped heads before and they work fine. I have never used offset heads.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 2, 2016
Answer: 
Yes, Paslode 30-degree Framing nails work with all 30-degree Framing Nailers.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

the offset nail head is that a replacement for the clipped head nail for the 30degree paslode framing nailer

This question is from 3 in. x 0.120-Gauge 30° Galvanized Ring Shank Paper Tape Framing Nails 2000 per Box
Asked by
maryland
Read all my Q&A
April 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
April 28, 2016
Answer: 
Thanks for your question. Yes, the offset nail heads have replaced clipped head style nails but you need to confirm your nailer will accept them. All Paslode Framing nailers with serial numbers starting with 0608 (2006 Feb) are good for our full off-set head nails (called Round Drive). Anything older will not work. If you have additional questions, please contact Paslode Tech Support at 800-222-6990 ext. Read More
Thanks for your question. Yes, the offset nail heads have replaced clipped head style nails but you need to confirm your nailer will accept them. All Paslode Framing nailers with serial numbers starting with 0608 (2006 Feb) are good for our full off-set head nails (called Round Drive). Anything older will not work. If you have additional questions, please contact Paslode Tech Support at 800-222-6990 ext. 4 from 8:00 - 4:30 CT Monday - Friday. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-22 T17:33:50.095-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100678208, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 17 reviewers.
Rated 5.0 out of 5.0 by Great Box of Nails Best box of nails I've purchased in a long time...... September 13, 2016
Rated 4.0 out of 5.0 by Good nails The paslode nails are basically just for paslode products as there are not any other 30 degree nails that I have found. I think they are way over priced. August 30, 2016
Rated 5.0 out of 5.0 by Best nails All the companies trying to get you to change over to plastic are just stupid these nails with the paper don't leave big plastic chunks everywhere poking up outta the deck take note passlode.. July 26, 2016
Rated 4.0 out of 5.0 by Paslode nails These Paslode nails are great for framing and are a must have for building a deck not to mention that the Paslode gun itself is a necessity. They are very strong and even harder to remove which makes it great for framing purposes as long as you don't mess up and have to remove them. LOL!! Great product. June 14, 2016
Rated 5.0 out of 5.0 by Paslode project All I ever had was Paslode nail guns and have used nothing but the Paslode nails. I have no complaint about the nails. I prefer keeping nail brands together with same brand nail gun. They are built together to match. Less problems and failures which I have had few. November 15, 2014
Rated 5.0 out of 5.0 by very good I bought these to put together some horse stalls -- Because they are not going to rust and they have tons of holding power .. I wish they didn't cost so much - But I think they do the job and I will buy them again.. most of my barn used these nails too. October 9, 2012
Rated 5.0 out of 5.0 by Great Product @ a good price Great Product @ a good price!!!! I use these on every project we have. January 26, 2016
Rated 5.0 out of 5.0 by Offset Full Head Nails These are full head nails that work in a paper collated clip head gun. The head is offset, but full sized. I have fired a box and a half in a Porter Cable framing gun with no failures, except when hitting other nails. The ring shanks grab. Having to remove one will kill a lot of your time. Grinding off the head and driving the nail flush is the best solution. June 16, 2015
  • 2016-09-23 T20:28:02.884-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_17, tr_17
  • loc_en_US, sid_100678208, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • REVIEWS, PRODUCT