Model # 650830

Internet #204362165

Store SKU #1000017040

Paslode 3 in. x 0.131-Gauge 30-Degree Brite Smooth Shank Paper Tape Framing Nails (2500 per Box)


3 in. x 0.131-Gauge 30-Degree Brite Smooth Shank Paper Tape Framing Nails (2500 per Box)

  • Drives nails flush into harder woods
  • Drives up to 40% easier to increase job site efficiency
  • More productivity - fewer jams, fewer misfires
$5558 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Paslode Brite 3 in. x 0.131-Gauge 30-degree Framing Nails are designed and manufactured to match the specs of Paslode framing nailers so your nailer will run smooth, with fewer jams and misfires. Nails drive flush even into the harder woods and LVL's. To experience non-stop nailing, use Paslode Brite Framing nails for interior framing jobs.

  • Use with Paslode 30-degree framing nailers for interior framing jobs
  • Special tip coating for more holding power
  • Code compliant: ICC ES-3072 - no project delays from failed inspections
  • Paslode 30-degree paper tape framing nails are available in 2-3/8 in. to 3-1/4 in. lengths; 0.113 in. to 0.131 in. shank diameters
  • Reinforced round head design for better drive performance in the hardest materials
  • Paper tape collation resists breaking when dropped - no job site debris to clean up
  • 10% more nails per strip means more time working, less time reloading




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Will these work in a clipped head nailer?

I understand CA doesn't allow clipped head nailers. Do these work in a clipped head nailer?
Asked by: hotboater
Don't work in CA, but I've used 3-in. x .131Brite Paslode offset round head nails in Senco FP650, FP 701, and Hitachi NR83AA clipped head nailers as well as Paslode F350s with good results. I did have problems using these nails in the first generation Hitachi N90AD -lime green monster! Hitachi has revamped that model but I never went back to try it. But be aware and do your HOMEWORK when it comes to nail selection. B.I.'s and code books do not simply call out 'round head nails' only! There is always a spec that goes with a code requirement. For example a nail schedule may say -roof sheathing -5/8 -3/4-in- nail 6-in. o.c. edge and 12-in. o.c. in field with 8d common nails. Here's where it gets tricky. A round head nail is available in 8d length but diameters from .090 to .131. The ASTM F1667 spec for an 8d common is 2-1/2" X .131. The point is 'Round Head" alone doesn't equal common nail or code acceptance. Mfgs. produce ICC-ES Reports for best use of thier nails. Check out ICC-ESR-1539 it's free online.
Answered by: Fredframer
Date published: 2017-05-11

Dear Paslode product expert

RE: Paslode #650830. Still made in USA? The new white boxes don't have it on the label like the old brown box. The collation doesn't hold up as well=MORE jams+ wasted time! I use Paslode F350s and Hitachi NR83AA3 framers. Recently tried the S-nco and no problems. Other carpenters have told me the same story.What's up Paslode?
Asked by: Fredframer
Thank you for your comments. Some Paslode nails are made in the USA but Paslode #650830 Brite Round Drive Framing Nails are made in China. For additional information about Paslode products, feel free to contact Paslode Tech Support at 800-222-6990 or
Answered by: Paslode
Date published: 2017-05-11

Are these nails compatible with dewalt dcn692 nailers

Asked by: af
  • y_2017, m_7, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_204362165, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms

Customer Reviews

3 in. x 0.131-Gauge 30-Degree Brite Smooth Shank Paper Tape Framing Nails (2500 per Box) is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Gets the job done Odd how a simple need can become a huge headache. I needed Nails. No not the ten at the end of my fingers but the 2,500 that would hold my wooden frame together. You would think that they are all made the same.... but they are not. Gladly Home Depot carries a good quality product at a comfortable price. Thank you.
Date published: 2016-01-12
Rated 5 out of 5 by from Paslode Framing Nails More expensive than off-brand but these have an adhesive-coated fluted shank as well as rough head so they hold tighter and drive better.
Date published: 2016-01-19
Rated 5 out of 5 by from Works Perfect-Saves Money Very good product that help my company save a lot of money.
Date published: 2016-01-12
  • y_2017, m_7, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_204362165, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms