0785007021103

Pass & Seymour

Model SWP26NIBPCC10

Internet #202971988

Store SKU #949498

Screwless 1 Gang Decora Wall Plate - Nickel Finish

$6.97 /each

Frequently Bought Together

Product Overview

Add a classic touch to any contemporary kitchen or bath with the new Pass & Seymour Nickel Devices. Available in switches, dimmers, tamper-resistant and GFCI receptacles, these elegant yet understated devices, along with their matching Screwless Wall Plates are a perfect complement to modern cabinets, lighting fixtures, plumbing fixtures and appliances. In addition to their great looks, these new devices are designed to withstand the hard knocks of a busy household. And the uniquely constructed matching Screwless Wall Plates have a no-dirt-catching channel around the perimeter, ensuring a clean, uniform look.

  • 1 Gang plate with a single oversized opening to accommodate NEMA 26 decorator-style devices
  • Durable polycarbonate construction
  • Matte nickel finish
  • Automatic alignment pins help ensure that devices are positioned for proper fit

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions7 Answers

Customer Questions & Answers

Screwless 1 Gang Decora Wall Plate - Nickel Finish
Screwless 1 Gang Decora Wall Plate - Nickel Finish

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
 
2 answers

does it come in a sliding dimmer switch

This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
Asked by
pt charlotte,fl
Read all my Q&A
September 20, 2015
also, I can't get the sliding bracket to stay flush against the wall.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Albuquerque, NM
Read all my Q&A
Home Improvement Profile: DIYer
September 22, 2015
Answer: 
Yes it does come with a sliding dimmer. As far as the bracket not staying flush to the wall, you might need to loosen the screws to the electrical box and have it come out a little further so that the screws to the becket can go in further. only a guess. Did you add tile or something to the wall which would keep the plate from screwing securely to the electrical box?
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 22, 2015
Answer: 
Good Morning,
Currently only our Harmony dimmers come in a matching Nickel color. The particular dimmer you need would depend on the type of lighting you are trying to control.
http://www.legrand.us/search.aspx?q=Harmony%20Dimmer
Only the incandescent dimmer (H703PNICCV4) comes with a nickel face on it. For all other Harmony dimmers, They will typically come with a White face on them. You will need to Read More
Good Morning,
Currently only our Harmony dimmers come in a matching Nickel color. The particular dimmer you need would depend on the type of lighting you are trying to control.
http://www.legrand.us/search.aspx?q=Harmony%20Dimmer
Only the incandescent dimmer (H703PNICCV4) comes with a nickel face on it. For all other Harmony dimmers, They will typically come with a White face on them. You will need to order part# HKITNI to change the face to the Nickel color.
Hope this helps! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
 
2 answers

how do i remove the plate to repair the switch without damaging anything?

This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
Asked by
rocklin, ca
Read all my Q&A
December 20, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Omaha Ne
Read all my Q&A
March 19, 2015
Answer: 
I use a flat head screw driver. There are two notches in the bottom side. Pry each off. The material can take more than you think and if your prying too hard try the other notch. I had to take them off several times to ensure proper flushness with switch/outlet.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
syracuse, NY
Read all my Q&A
Home Improvement Profile: Professional
December 23, 2013
Answer: 
Thank you for your question regarding our Pass & Seymour 1 Gang Screwless Decorator Wall Plate - Nickel Finish(Model # SWP26NIBPCC10).
The wallplate can be easily removed by inserting a flat head screwdriver into one hole at bottom of plate. Twist screwdriver until the wallplate pops. Repeat step for 2nd hole at bottom until wallplates snaps off subframe.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
 
1 answer

additional items

This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
Asked by
Houston, TX
Read all my Q&A
November 5, 2015
I need matching covers for the cable outlet wall plate, as well as blanks for cable holes not in use.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 6, 2015
Answer: 
Good Afternoon,
Unfortunately, we don't have the keystone jacks or frames available in nickel yet. They should be available within the next few months.
Hope this helps!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
 
1 answer

Correct fit for dimmer?

This question is from Screwless 1 Gang Decora Wall Plate - Nickel Finish
Asked by
California
Read all my Q&A
August 15, 2015
Will this work with Pass & Seymour Model # H703PNICCV4 700-Watt Single Pole/3-Way Decorator Dimmer - Nickel Color?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 17, 2015
Answer: 
Thank you for your question regarding Pass & Seymour Legrand Screwless 1 Gang Decora Wall Plate - Nickel Finish(Model # SWP26NIBPCC10).
Yes, the SWP26NIBPCC10 is the correct wallplate for the H703PNICCV4 dimmer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:39:50.314-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202971988, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 84ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 16 reviewers.
Rated 3.0 out of 5.0 by Jury is still out Depends on your personal preferences & decor. I installed the matching outlet and am dissappointed in the appearance, so I am still trying to decide if to keep all the matching switches & plates,.. or if to return them and go with the less expensive standard white. . This photo actually makes it look better than it does in person. It looks like what it is - cheap, grey, plastic, it does NOT look anything like nickel as described. It might look good in grey decor, but for my tastes & on my beige walls w/white trim & nickel fixtures, I think it looks kind of tacky, like a failed attempt for something better than standard white/almond. I think I could have done better with a spray can of metallic paint. Maybe it will grow on me, but my initial thought is that I should have stuck with the lower cost August 17, 2016
Rated 4.0 out of 5.0 by Quality product, easy to install For the price and look of not having screws showing it's a very good product. Very easy to install. Looks clean. June 28, 2016
Rated 4.0 out of 5.0 by Look great in kitchens -- matches stainless appliances Easy to install after you get the hang of it. No screws make for a clean look. July 19, 2016
Rated 4.0 out of 5.0 by Nice & easy Easy install just a crew driver and snap in ,looks good and easy to clean April 12, 2016
Rated 1.0 out of 5.0 by Not a great product Returned to store bad design.First screws go right through holes to big in back plate Two piece design is dumb as backing plate is not strong May work on flat drywall applications but will not work on tile So save your money use screws as this offers no support for plate also April 12, 2016
Rated 5.0 out of 5.0 by Complete the Look of the Kitchen This was exactly what I was looking for and it completed my Kitchen project to the Nth degree! these light switches matched my Stainless steel appliances just perfectly. March 25, 2015
Rated 5.0 out of 5.0 by Updated light switches I decide to change from the flip up to the flat; got Pass & Seymour and I'm very happy with them December 29, 2015
Rated 5.0 out of 5.0 by final touches One of my final touches to all the work on my kitchen. September 8, 2015
  • 2016-09-08 T15:56:41.302-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_202971988, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT