Rated 4.3 out of 5 by 52
Rated 2.0 out of 5.0 by Codester Delta Monitor conversion beware
Beware if you are a Delta monitor valve owner. I just purchased a couple of these to replace the oldschool Delta Fake Crystal Ball look. Based on the pictures this looked great. Little did I know that the conversion for Delta Monitor would place it twice the distance from the wall than in the original picture. This is nearly 6 inches and just as a far as the spout. These will be getting returned.
February 14, 2015
Rated 1.0 out of 5.0 by TCB4l Did not fit existing valve
I have used this product to upgrade a MOEN valve and it worked. But today I bought the product to upgrade a bathroom with a Price Fister valve and the P3 part was just a slight too small to thread onto the existing valve. UNIVERSAL doesn't always mean universal. its funny that PFister makes the product and it doesn't fit.
February 18, 2015
Rated 5.0 out of 5.0 by Panaman Great modern look, and easy to install
Don't waste your time calling a plumber to install this product for you. It is quite simple to do. It is so easy, the instructions are all pictures and no words. It really looks great. The directions cover a magnitude of different models and brands that it works on. Also the shower head it comes with has adjustable spray patterns. It comes with everything except the drain.
April 7, 2013
Rated 5.0 out of 5.0 by Capecodder Sleek Replacement For 2 Handle Tub/Shower
I needed to replace my 2 handle tub/shower faucet trim which was Delta and this Pfister trim kit replaced Delta and Moen fixture. It was easy to replace from the old Delta to Pfister and looks so much cleaner, sleeker and updated my bathroom. I just wish it came with shower/faucet replacement valve, other than that it is a great product. I also had to buy a steel plate because I went from 2 handles to one handle. Its alot nicer to have a mixing valve than a hot and cold handles. This one handle tub/shower kit makes everything look cleaner, sleek and well needed update.
January 25, 2014
Rated 2.0 out of 5.0 by Blackstarryskye Use caution in selection
Never know what you'll find when you open a wall. Unfortunately this time did not turn out so good. The hole for the valve to come through the wall was very small and the pipes were secured to the wall with a screw ring on the inside. So I ended up with a plumber digging into the wall a bit. The handle sticks out quite a bit and does not feel stable. Might have been worth spending more money to have them redo the whole thing.
January 3, 2014
Rated 3.0 out of 5.0 by DIYinUT Looks Good but Instructions are Confusing
The product assembled easily enough and looks good and functions well. We love the adjustable shower head. This kit also contains many adapters to fit a wide variety of valve controls. However this is also why I only gave it 3 stars.
The kits has many parts that will end up not being used because it's meant to fit so many different applications. Some parts are similar and just vary in size or small design. My biggest complaint is that there is no identifying markings on the parts inside the box. Just a key number inside the manual. I accidentally put the wrong parts on a couple of times and had to take things apart a couple of times to make the faucet work correctly.
Also note that the manual instructions are not as clear as they should be. The instructions kept telling me to move to "step 'X' " for my valve type. It should really be referring to a page in conjunction with the type of valve you have as each different valve assembly has upwards of 12 assembly steps. And if you're not careful you will try to assemble the faucet in the middle of the wrong assembly.
Once you are on the correct page, the assembly instructions are quite clear. it's just determining which parts are correct that gets a little tricky.
I also had to cut down the copper water outlet pipe about an inch to flush mount the faucet to the shower wall. not an issue if you have the non-threaded copper pipe like I did. However I can't comment on the other installation methods.
Overall we are happy with the new faucet and shower head other than we were sent the wrong finish (chrome instead of brushed).
March 28, 2013
Rated 5.0 out of 5.0 by BG324 Easy to Install
The Universal Tub Shower Trim kit was very easy to install and the instructions were not hard to follow. I am not a plumber but I was able to use the kit in both of my bathrooms and they turned out great.
June 24, 2014
Rated 5.0 out of 5.0 by Artemis Nice look, easy to install
We used this in our guest bath and weren't completely sure what brand we were replacing (the previous homeowners were "creative" with home maintenance and remodel . . . ). We had previously replaced a Moen with a Delta kit, in our master bath, and ended up having to replace the complete fixture - not a great experience. I like the variety of adapters available in this kit and we had no problem changing out the trim pieces. Nice product, nice look. I wish I'd gone with Pfister in the master bath.
January 30, 2014