0046677415792

Philips

Model 415794

Internet #202786270

Store SKU #195340

50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)

$14.97 /each
(limit 35 per order)
  • Dimmable design for custom lighting
  • Shines up to 3000 hours
  • 1.8-year limited warranty

Frequently Bought Together

Product Overview

These three Philips 50-Watt Halogen GU10 Flood Light Bulbs emit a bright 430 lumens of light and are rated for a long service life of up to 3000 hours. Great for accent lighting, track lighting and pendant fixtures, these bulbs install in fixtures that accept GU10 bases. Using 50 watts of energy, the bulbs are also dimmable to allow for varying light preferences.

  • Brightness: 430 lumens
  • Estimated yearly energy cost: $6.02 (based on three hours/day, 11¢/kWh; cost depends on rates and use)
  • Life: 2.7 years (based on three hours/day)
  • Light appearance: 2800K (soft white)
  • Energy used: 50 watts
  • Lumens per watt: 8.6
  • Ideal for use in indoor track, recessed and pendant fixtures
  • Great for accent lighting to highlight your decor
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

11 Questions29 Answers

Customer Questions & Answers

50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)
50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
10 answers

I think these are the bulbs in my new home. I can not remove a burned out bulb. How do I remove and install?

This question is from 50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)
Asked by
emmiew
Houston Texas
July 27, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (10)

Asked by
Emmaus,Pa
Read all my Q&A
Home Improvement Profile: DIYer
November 14, 2015
Answer: 
I recently had the same issue try using a small suction cup ( You can find it with the hooks
the hook /suction cup) The hook folds down and the suction cups locks on the bulb and you
twist it off I tried it and it works
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Wellington, FL
Read all my Q&A
January 13, 2015
Answer: 
This particular model requires that you twist them off (half a turn only)... You may want to take a picture with your smart phone and ask the associate at Home Depot. Good luck!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Auburn, IN
Read all my Q&A
January 6, 2015
Answer: 
The bulbs are designed with two prongs similar to the design of a socket head screw. To remove the old bulb, just turn the bulb counter-clockwise to remove (turning the bulb to the left). To install the new bulb just insert the prongs into the socket in the lamp and turn the bulb clockwise.
+7points
8out of 9found this answer helpful.
Was this helpful?helpful8unhelpful1

Asked by
Puget Sound, WA
Read all my Q&A
Home Improvement Profile: DIYer
October 21, 2014
Answer: 
I have tried the various suction cup lamp removers that you can get in a kit with other attachments. They're all useless. The only one that comes close to working is found on Amazon. Nora Track Light NRS90-N20 - Suction Cup MR16 Lamp Changer Head. Other than this cup, I have used one of those friction pads that you use for opening jar lids. It is mildly successful and fairly frustrating. The big problem Read More
I have tried the various suction cup lamp removers that you can get in a kit with other attachments. They're all useless. The only one that comes close to working is found on Amazon. Nora Track Light NRS90-N20 - Suction Cup MR16 Lamp Changer Head. Other than this cup, I have used one of those friction pads that you use for opening jar lids. It is mildly successful and fairly frustrating. The big problem with the design of the glass housing of the fixture is that you can't get your fingers in far enough to grab the lamp and a two year old, whose fingers could fit, doesn't have the strength. A little more thought on the part of the product designers and this could all go away. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Philadelphia Pa
Read all my Q&A
April 8, 2014
Answer: 
depress slightly and turn about 1/8 in.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
New Hampshire, USA
Read all my Q&A
March 18, 2014
Answer: 
They twist out. Don't be afraid to turn hard, they lock in tight.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
United States
Read all my Q&A
February 25, 2014
Answer: 
These should turn out. They may take a little pressure as mine did. Be careful when turning as they can break. Only turn slightly as there are two contacts that actually make the connection.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Delaware, USA
Read all my Q&A
January 14, 2014
Answer: 
They're not standard bulbs with thread, there are 2 prongs at the base. Gently push in on the bulb, turn 1/4 to the left and pull out.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Philips Lighting, North America HQ
Read all my Q&A
July 29, 2013
Answer: 
Hi emmiew, there is a special way to remove MR16 bulbs if they are in a recessed fixture. First, the light switch should be turned off. You then will have to pull down on the trim of the fixture, and you may have to twist it a bit. The fixture will then hang from the ceiling. You then will pull the silver ring connected to the dangling wire separating the fixture from the socket. Last, you can pull the Read More
Hi emmiew, there is a special way to remove MR16 bulbs if they are in a recessed fixture. First, the light switch should be turned off. You then will have to pull down on the trim of the fixture, and you may have to twist it a bit. The fixture will then hang from the ceiling. You then will pull the silver ring connected to the dangling wire separating the fixture from the socket. Last, you can pull the bulb out from the two hold springs through the back of the fixture. Please let the Philips Lighting team know if you have any problems. Read Less
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

July 28, 2013
Answer: 
there is a little suction cup type of gadget that you'd use, sometimes these come with the original fixture. Or you could use rubber dish washing gloves for better gripping. I have these and they are mounted in a light fixture where the glass housing is tight around the lamp, I unscrewed the glass housing to back it off where I can then get my finger tips onto the lamp. Remember, these lamps you twist Read More
there is a little suction cup type of gadget that you'd use, sometimes these come with the original fixture. Or you could use rubber dish washing gloves for better gripping. I have these and they are mounted in a light fixture where the glass housing is tight around the lamp, I unscrewed the glass housing to back it off where I can then get my finger tips onto the lamp. Remember, these lamps you twist off counter clock wise about 20 degrees Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
5 answers

Can these lights use dimmer switches?

This question is from 50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)
Asked by
Pip
Royal Oak, MI
June 9, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Hallandale, Fl
Read all my Q&A
Home Improvement Profile: Other
May 13, 2016
Answer: 
Yes they light can be dimmed
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Wellington, FL
Read all my Q&A
January 13, 2015
Answer: 
I believe that you can use a dimmer switch. However, I do not have connected to my lights.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Auburn, IN
Read all my Q&A
January 6, 2015
Answer: 
I have these bulbs in my track lights and they work great on the dimmer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
United States
Read all my Q&A
February 25, 2014
Answer: 
yes, I have mine on a dimmer and they work great for that
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Philips Lighting, North America HQ
Read all my Q&A
June 10, 2013
Answer: 
Hello Pip,
The Philips 50-Watt MR16 GU10 Twist Line Light Bulb is a dimmable product. Therefore they can be used with dimmer switches.
Please let us know if there is any other information we can provide.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

Can this bulb be used on a range hood.

This question is from 50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)
Asked by
Tysons VA
Read all my Q&A
May 12, 2016
I have Viking range hood which takes 50w 120v halogen bulb. Is there a special protective cover on kitchen range hood bulbs that I need to be concerned with? Will the Phillips bulb work in my range?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Read all my Q&A
May 15, 2016
Answer: 
Mike,
I had called Viking but they want to sell their bulb for $40.00 and would not respond on Phillips brand.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
The Villages
Read all my Q&A
May 13, 2016
Answer: 
Not sure the Philips bulb gives off some heat. If it fits it might work did you check with Viking or PHILPS TO SEE IF YOU CAN substitute it
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Hallandale, Fl
Read all my Q&A
Home Improvement Profile: Other
May 13, 2016
Answer: 
You should use the protective cover because of the grease splatter.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 13, 2016
Answer: 
Please contact the manufacturer of the range hood,
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Can I replace halogen lightbulb with an LED

This question is from 50-Watt Halogen MR16 GU10 TwistLine Dimmable Flood Light Bulb (3-Pack)
Asked by
Pinckney, michigan
Read all my Q&A
March 15, 2016
No more details
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

March 16, 2016
Answer: 
Yes, you can replace halogen lightbuld with an LED.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

March 16, 2016
Answer: 
We do have LED GU10 lamps for 50W equivalency. Both are 50W equivalency for GU10 Halogen.
929001128803 454363 BC4.5GU10/AMB/F25 3000 DIM 120V
929001156504 457655 5GU10/LED/2700-2200/F35 Dim 120V
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-08-29 T15:23:02.565-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202786270, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 67 reviewers.
Rated 4.0 out of 5.0 by OK Bulbs Easy to replace and provide great lighting. However..... Specs state up to 3,000 hours use. Mine are in an office environment and burn approx. 9 hours a day, 5 days a week, and I never get a year's use from a bulb. August 7, 2016
Rated 5.0 out of 5.0 by Where's the suction cup? The last time I bought these there was a suction cup included. It came in VERY handy to get the old bulb out & the new bulb into the fixture. Of course, as long as these bulbs last, the suction cup got lost. Luckily there was a suction cup to be purchased in another dept. These bulbs are clear & bright & last a long time. July 30, 2016
Rated 5.0 out of 5.0 by works great... on a fan. Easy to install. The price was great --- if one bought 3. But I had only one bulb out. So, there're 2 sitting on the shelf! July 26, 2016
Rated 5.0 out of 5.0 by Always in stock Hard to find spot light in other stores, and the Home Depot has the best price and always in stock.THANKS June 21, 2016
Rated 5.0 out of 5.0 by Good lights!! These are very nice for recessed lighting! Lasts about 1 1/2 to 2 years. May 3, 2016
Rated 5.0 out of 5.0 by What a difference! Lights are nice and bright, and are perfect for our older track lighting. May 10, 2016
Rated 4.0 out of 5.0 by Specialty Bulbs A little expensive and should last a lot longer. Will buy again April 26, 2016
Rated 5.0 out of 5.0 by All bulbs worked! The bulbs were the correct size and all worked perfectly after insertion. The value was great compared to other stores. I buy all my bulbs at Home Depot with their large selection of every type you would ever need. February 25, 2015
  • 2016-08-29 T16:31:11.166-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_67, tr_67
  • loc_en_US, sid_202786270, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT