0090415940077

Pittsburgh Corning

Model # 104007

Internet # 100574014

ProVantage Glass Block Anchors (5-Pack)

$10.42 /carton
  • Used with the horizontal tracks to attached block to frame
  • Made from stainless steel to prevent rusting
  • Not visable in the finished glass block wall

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 104007

Internet # 100574014

Build straight, uniform walls or other designs with ease using these Pittsburgh Corning ProVantage Glass Block Anchors (5-Pack) that attach horizontal spacers to the rough opening and promote consistent joint spacing.

  • Used to attach ProVantage horizontal spacers along the perimeter of the glass block opening
  • Can be used as an alternative to Premiere perimeter channels
  • Easy to install
  • Enables the construction of straight walls, curved walls and step-down partitions
  • Helps ensure consistent, evenly spaced joints
  • Install every 16 in. on center
  • Made in the USA
  • Includes 5 Anchors
  • Note: Product may vary by store.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
1.5 
Product Thickness (in.) 
2.5 in 
Product Width (in.) 
Details
Product Weight (lb.) 
.2 lb 
Returnable 
90-Day 
Warranty / Certifications
Manufacturer Warranty 
Pittsburgh Corning promises to replace any glass block accessory that is found to be defective within five years from date of purchase. 

MORE PRODUCTS WITH THESE FEATURES

Price: $10 - $20
Brand: Pittsburgh Corning
Review Rating: 4 & Up
Search
5 Questions6 Answers

Customer Questions & Answers

ProVantage Glass Block Anchors (5-Pack)
ProVantage Glass Block Anchors (5-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

How many anchors do you need per glass block.

This question is from ProVantage Glass Block Anchors (5-Pack)
Asked by
Charlotte, North Carolina
Read all my Q&A
August 21, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Madison AL
Read all my Q&A
May 10, 2016
Answer: 
These anchors screw into the frame on each side of the plastic support strip at each level of block(s).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 25, 2014
Answer: 
ProVantage Anchors are "plugged" into the end of the Horizontal Spacer where attached to the sides at every course.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
 
1 answer

Where do I need channels?

This question is from ProVantage Glass Block Anchors (5-Pack)
Asked by
Lihue Hawaii
Read all my Q&A
October 15, 2015
I am installing a shower wall attached on two sides one vertical and a horizontal bottom. Do I use channel on both? or just the bottom and brackets on the vertical?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 16, 2015
Answer: 
There are two ways to anchor glass blocks. Channel OR anchors. Channels are used when building a panel that is attached ar all four sides (like a window). Anchors are used when you are building a panel that has angles in it or is attached at two, three or four sides. For your installation, you will use the anchors. No channels.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

installing in a shower area and when i get to the top where it is going to be open do i need to install the track on top?

This question is from ProVantage Glass Block Anchors (5-Pack)
Asked by
North Carolina
Read all my Q&A
July 27, 2015
also in interior installs like in video he doesn't use the anchors... Do I need them?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 28, 2015
Answer: 
There are two ways to anchor glass blocks. Anchors or Channel. The ProVantage I Installation uses channel. Channel is used for straight panels attached to all four sides. Anchors are used for straight or 90 degree angled walls attached to two, three or four sides.Your project will use anchors. You can finish the top course off with a bed of grout, sealing all of the joints. Or, you could cut pieces of Read More
There are two ways to anchor glass blocks. Anchors or Channel. The ProVantage I Installation uses channel. Channel is used for straight panels attached to all four sides. Anchors are used for straight or 90 degree angled walls attached to two, three or four sides.Your project will use anchors. You can finish the top course off with a bed of grout, sealing all of the joints. Or, you could cut pieces of ceramic tile, glass tile etc. to the size/shape of the ends of the blocks and attach those. If your wall is straight and uses all 8x8" blocks, you could finish off your wall with End Blocks up the side and across the top with an Encurve at the conrer. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

If your installation is only 1 block wide (x 9 blocks high) do you need to use an anchor in every row?

This question is from ProVantage Glass Block Anchors (5-Pack)
Asked by
Maine
Read all my Q&A
October 20, 2014
And why sell them 5 per pack when you need at least 2 per row?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 21, 2014
Answer: 
Yes. The ProVantage System calls anchors on every course.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-06-17 T11:13:33.142-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100574014, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 69ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 5.0 out of 5 by 2 reviewers.
Rated 5.0 out of 5.0 by Great Job! Great Job! Great Job! Great Job! Great Job! Great Job! April 26, 2016
Rated 5.0 out of 5.0 by This product makes it very eassy to install the glass blocks. It holds the blocks stady, and in place while other blocks are placed, and assures that glass blocks don't fall out of alligment or come off, while the glass sealant is drying. November 18, 2011
  • 2016-06-17 T13:43:04.018-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_100574014, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • REVIEWS, PRODUCT