0074507412000

Plaskolite

Model # 1A25001A

Internet # 100542281

Store SKU # 116157

23.75 in. x 47.75 in. Clear Polystyrene Light Panel

$7.47 /each

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 1A25001A

Internet # 100542281

Store SKU # 116157

The 47-3/4 in. x 23-3/4 in. Clear Polystyrene Light Panel offers an economical replacement option for suspended-grid ceiling lght fixtures. It has a prismatic surface that helps diffuse the light from fluorescent bulbs.

  • Made of clear, light-weight polystyrene
  • Light panel for suspended-grid ceilings
  • Approximately 8 sq. ft. coverage area per piece
  • Prismatic surface disperses light evenly

SPECIFICATIONS

Dimensions
Approximate Size (ft.) 
2 x 4 
Area Covered per Piece (sq. ft.) 
7.41 
Product Depth (in.) 
0.065 
Product Height (in.) 
47.75 
Product Width (in.) 
23.75 
Thickness (In.) 
0.065 
Details
Antimicrobial 
No 
Ceiling Product Type 
Suspended Grid Panel 
Color Family 
Clear 
Material 
Plastic 
Moisture Resistant 
No 
Number of Pieces per Case 
Suspended Grid Panel Type 
Light Panel 
Weight (lb.) 
1.45 
Warranty / Certifications
Class A Fire Rating 
No 
Manufacturer Warranty 
None 

MORE PRODUCTS WITH THESE FEATURES

Brand: Plaskolite
Review Rating: 2 & Up
Approximate Size (ft.): 2 x 4
Search
3 Questions5 Answers

Customer Questions & Answers

23.75 in. x 47.75 in. Clear Polystyrene Light Panel
23.75 in. x 47.75 in. Clear Polystyrene Light Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

How do I get the sheet into the fixture?? The sheet seems about 1/4'' too large in both directons. Any tricks??

This question is from 23.75 in. x 47.75 in. Clear Polystyrene Light Panel
Asked by
edmonton, ab canada
Read all my Q&A
October 16, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

October 26, 2015
Answer: 
Dear Valued Home Depot Customer,
We reached out to MFG for more information and below is their response.
“ Our lighting panels are made to fit a standard 2’x4’ drop ceiling.
If you are trying to install a replacement lighting panel into a lighting troffer, the panel may need to be cut to size to fit the specific model.
· We sell a cutting tool specifically designed to cut lighting panels (SKU# Read More
Dear Valued Home Depot Customer,
We reached out to MFG for more information and below is their response.
“ Our lighting panels are made to fit a standard 2’x4’ drop ceiling.
If you are trying to install a replacement lighting panel into a lighting troffer, the panel may need to be cut to size to fit the specific model.
· We sell a cutting tool specifically designed to cut lighting panels (SKU# 116491). "
Thanks,
The Home Depot User Generated Content Team
Read Less
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

October 22, 2015
Answer: 
This material is very brittle so be careful. Do not use any tools with a lot of motion because will call cracking or break the panel. Tape along the edge which will prevent cracking, and clamp the piece down securely. Use a straight edge and cut along the tape to the desired size. It should not be very difficult to cut as this panel is very thin. Then remove the tape.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

can this be used under my range hood to diffuse the light over the stove?

This question is from 23.75 in. x 47.75 in. Clear Polystyrene Light Panel
Asked by
Boston MA
Read all my Q&A
November 20, 2014
Lower edge of Range hood is 25 inches above the surface of the stove. The hood light bulb is 24.5" above stove surface and is at my eye level.
There is a 1/4" lip surrounding the hood opening. I would like to suspend a light diffuser over the opening. What do you think? The range hood opening is 23.5 x 17.5.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

December 3, 2014
Answer: 
Dear Valued HomeDepot Customer,
We reached out to the MFG for more information and below is their response.
"Although polystyrene may work for this type of application, it is not the best option. Continuous high heat exposure, along with moisture absorption will cause the plastic to expand and contract, if expansion/contraction allowance isn’t accounted for, the lens could bow or crack. The continuous Read More
Dear Valued HomeDepot Customer,
We reached out to the MFG for more information and below is their response.
"Although polystyrene may work for this type of application, it is not the best option. Continuous high heat exposure, along with moisture absorption will cause the plastic to expand and contract, if expansion/contraction allowance isn’t accounted for, the lens could bow or crack. The continuous high heat exposure may degrade the polystyrene over time, which would cause yellowing. Glass may be a better option for this application, as it can withstand much higher temperatures, will not expand/contract, is non-yellowing and is much easier to clean." Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 1, 2014
Answer: 
I would recommend you move up to the Acrylic based lighting panels as they have more material strength than the styrene based panels. They will hold up to the added heat of the stove top better than the styrene as the styrene will tend to become brittle much faster.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can i get a vendors phone number to see if i can get a same light panel diff dimensions

This question is from 23.75 in. x 47.75 in. Clear Polystyrene Light Panel
Asked by
Laredo texas
Read all my Q&A
November 9, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 12, 2015
Answer: 
Please contact your local Home Depot's Millworks Department (doors & windows). They will be able to help you with your request.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-05-24 T04:21:24.497-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100542281, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 107ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 2.0 out of 5 by 6 reviewers.
Rated 1.0 out of 5.0 by Don't Breathe On Them Caution: These panels will crack and break if you breathe on them. I bought a few panels at the store. All of the panels on the shelf were broken. It looked like the case had been dropped. I picked a few of the least damaged but additional cracks and large chips continued to appear no matter how careful I was. January 14, 2015
Rated 1.0 out of 5.0 by measures wrong This panel does not Measure as it says it does. I needed right at 24"x48" and this measured 22"x46". 2 inches on both sides is a big diffetence when it says it measures different. Back to the store it goes. Made cheap as well..very fragile. August 21, 2014
Rated 3.0 out of 5.0 by Glue removal very difficult The stickers on these panels are extremely difficult to remove. We tried OOPS, alchohol didn't do much, we soaked with a soapy wet washrag and finally the last step we used WD-40 but had to work to get the oily film off. These guys should use a more releasable glue for their stickers. What a pain!!!!! They are very pretty though when you are done messing with them. A 5 minute job turned into a 30 minute job!!! December 4, 2012
Rated 1.0 out of 5.0 by You get what you pay for Watch Out!!! These are very flimsy and cheap. They easily crack and break. You don't even need a utility knife to cut them because a simple break will do. I really wish i had spent the extra few dollars for much better quality, afterall you do get what you pay for. February 25, 2013
Rated 5.0 out of 5.0 by Smooth I bought this product thinking it may be a mistake, but for the price I took a chance. I needed a 2 ft. x 2 ft. peace & had to cut it myself from a 2 ft. x 4 ft., it was smooth and easy without any thought: it worked or it did not. Smooth and flexible, SMOOTH May 13, 2010
Rated 1.0 out of 5.0 by 2X4 plastic panel The panels break very easily. It is very flimsy. It lackes physical strength. February 9, 2010
  • 2016-05-20 T14:31:30.476-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_6, tr_6
  • loc_en_US, sid_100542281, prod, sort_default
1-6 of 6
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT