Message to Our Customers


Model # FC350B

Internet # 203555581

Store SKU # 166779

3-1/2 in. Clipped-Head Framing Nailer

This item has been discontinued.
The Home Depot no longer carries this specific product.

$199.00 /each


Model # FC350B

Internet # 203555581

Store SKU # 166779

Ideal for carpenters, woodworkers, and DIY-ers, the FC350B touts a variety of features including a selectable trigger allowing the flexibility to choose between restrictive or contact actuation modes. For ease of use, each of the tools are also equipped with a depth-of-drive feature , a low nail lock-out mechanism to alert the user to reload the tool and a reversible rafter hook for hanging the tool on the left or right side. Additionally, the over-molded grip provides comfort and control when working.

  • Lightweight at just 7.3 lbs.
  • Power to drive nails up to 3-1/2 in. x 0.131 in. into engineered lumber
  • Toll-free adjustable exhaust
  • Accepts 30 to 34 degree paper tape offset round head and clipped head nails from 2 to 3-1/2 in.
  • Operating pressure of 70-120 psi
  • Kit includes the nailer, 1/4 in. male plug (installed), hex wrench, and instruction manual
  • Need help? CLICK HERE to view our Nail Gun Buying Guide
  • Home Depot Protection Plan:

    Home Depot Protection Plan


Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Air Tool Type 
Air Nailer 
Compressor/Air Tool Features 
Fastener Collation 
Energy Type 
No additional components or accessories are included 
Loading type 
Maximum Fastener Size 
3-1/2 in 
Minimum Fastener Size 
2 in 
Nail Gauge 
NA / Other 
Nailgun Angle 
Tools Product Type 
Power Tool 


Rated 4.5 out of 5 by 37 reviewers.
Rated 5.0 out of 5.0 by Great Nailer Works Great. Ready to throw away my hammers now. Easy to use and very powerful. Split my board the first test, but quickly adjusted it to the correct driving depth. Accepted full head and clipped nails. Have driven over 300 nails without a misfire or problem. Was able to build a new staircase to the basement in one day. A little heavy by the end of the day, but still easier than swinging the hammer. June 30, 2015
Rated 4.0 out of 5.0 by good gun for price Bought as back up. Was concerned about the light weight of gun but found it to work well. Not sure it would hold up to heavy use. I use it for home repairs. Cost was driving factor in my purchase. July 7, 2015
Rated 5.0 out of 5.0 by Pro grade industry standard quality After a lot of research i bought this item. First i purchased the 21* model FR350B and returned it for the FC350B. FR is for Round head and FC is for Clipped head nails. However the FC350B uses both round or clipped in the paper collated form. This makes your gun compatible with many on the market and out in use in the field today. Helpful when buying and sharing nails with other friends/contractors. After researching the paper collated nails; they are said to be safer as the paper gets desintigrated in the worked product. Whereas the plastic on the 21* FR nails get lodged in the mechanism or ejected. Even with goggles or protective eye wear you don't want to have to think about cast off while working...either for the user or others and you certainly don't want to spend time unjaming your gun. The FC is 30* angle which sets the nail cartridge closer to the handle providing more compact space to fire in close spaces. You'll appreciate it when its needed, but seems second nature while working with it. Both models come with a case, rafter/belt hook, two cushion heads, and adjustable exhaust. Great accessories for the price that many other manufactures lack. Get the industrial fittings for your compressor hook up. March 30, 2013
Rated 4.0 out of 5.0 by Updating tools Worked well, staff wasn't helpful. Could not find nails for the unit. Why sell something and staff is unable to recommend the proper nails? June 25, 2015
Rated 5.0 out of 5.0 by ease big jobs works on small air compressor with little down time June 15, 2015
Rated 3.0 out of 5.0 by works OK as a construction gun It is great if you are putting nails straight in for construction purposes. But for angling/toenailing siding it just doesn't have the impact that it needs. The nails only go in about half-way. March 23, 2015
Rated 5.0 out of 5.0 by Pro Grade Nail Gun @ Killer Price I have a large assortment of Porter Cable air nailers including the FR350A but when I was out shopping on Black Friday, I could not believe that they were practically giving away this gun for a buck-29. I couldn't get this thing in the basket quick enough and I've been using it every day since. To compare the two guns, the FR350A is a workhorse but this gun can run circles around it on every level. The FR is a round head only using plastic collated 22 deg nails and weighs ~15 pounds. The FC will take both round or clipped head paper collated in the 30-34 deg range, weighs ~7.5 pounds and has has been redesigned to drive 3.5" nails in engineered lumber. The gun comes equiped with Tool-lessTrigger Selection, Tool-less Depth Adjustment, Framers Hook, Low-Nail Lockout, Case, Oil, Allen Wrench, & Manual. As of today, you can still get this gun at this incredible price but you will have to do some looking as most stores sold out quickly. December 8, 2013
Rated 5.0 out of 5.0 by Great nail gun for the DIY homeowner Having owned this Porter Cable nailer now for just over 1.5yrs, can say without a doubt I made the right decision in my purchase. Looked at many guns in this category, different vendors, 21° vs. 34°, plastic strip collated vs. paper tape nails, etc. This light-weight gun never misfires, this gun uses paper-tape collated nails & those are less expensive then the plastic collated nails the 21° nail guns use, so no plastic debris from discharging nails flying all over the place & needing to be cleaned up. This FC350B shoots both clipped-head & full-head paper-tape collated nails, a great bonus. Haven't shot anything larger then 3-1/4" nails, but it sank all the way into the wood material with ease, make sure you add a drop or two of air tool oil when using it. I added this gun to my Porter Cable collection of pneumatic guns, only missing the 15-gauge DA gun. By far thoroughly satisfied with PC guns, ease of use, ease of cleaning as the firing areas are easily accessible to clean. The nail guns & staplers take multiple varieties of nail manufacturers, Paslode being my nail of choice if HD is out of Porter Cable nails/brads/staples. You won't go wrong with the purchase of this nailer, or any Porter Cable nailer. The gun also comes with a nice heavy-duty plastic molded carry case & small bottle of air tool oil, descriptive owners manual & an extra bump stop for the gun. April 27, 2015
  • 2015-07-27T11:58:18.335-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_37, tr_37
  • loc_en_US, sid_203555581, prod, sort_default
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.