Model # PCFP12236

Internet #203471324

Store SKU #1002227264

Porter-Cable 6 Gal. Portable Electric Air Compressor and 18-Gauge Brad Nailer Combo Kit


6 Gal. Portable Electric Air Compressor and 18-Gauge Brad Nailer Combo Kit

  • Oil-free pump for maintenance-free operation
  • Lightweight and portable at just 29 lbs.
  • Includes 2 in. 18-gauge brad nailer, hose and fasteners
$19900 /each

Frequently Bought Together

Product Overview

The Porter-Cable 6 Gal. Portable Electric Air Compressor Combo Kit features two regulated, factory-installed air couplers to easily support two users. Its body is made with steel for strength and has an upgraded shroud and console cover to protect its vital components. It is designed to operate at or below 150 PSI and also features an oil-free pump, eliminating the need for maintenance. This combo kit also includes the BN200C 18-Gauge 2 in. brad nailer, 25 ft. air hose and 100 brad nails.

  • Innovative shroud allows for better protection and portability
  • 150 PSI max allows users to drive more nails than a traditional 135 max PSI compressor
  • 6 Gal. tank allows users to drive a large quantity of nails on a single tank charge
  • 2.6 SCFM at 90 PSI allows for quick compressor recovery time, per ISO1217
  • Lightweight design enables easy portability
  • Maintenance-free pump for convenience and long-lasting use
  • 120-Volt electric unit allows compressor to run on standard household current
  • 10-Amp current draw allows use of compressor with a 16-gauge or heavier extension cord 50 ft. or less
  • BN200C uses standard 18-Gauge brad nails from 5/8 in. to 2 in. long
  • Maintenance-free motor designed to deliver long life
  • Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
  • Tool-free jam release mechanism for easy nail removal
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Is this a good device for interior trim work AND constructing custom bookshelving ?

Ex: Baseboard, window frame, door frame, floor-to-ceiling custom shelving, etc
Asked by: homeowner01
Yes. I used a much lower quality compressor to do the same thing, a 100psi, 3 gal unit from Harbor Freight. It did the job, actually three houses of interior trims and two book cases and many other projects. I'd get a little frustrated with waiting for it to build back up enough pressure some times, but I'd multi task. This unit is far superior. Much faster tank fill times and a bigger tank. The 150 psi is good for many other tasks too, like impact wrenches... I still have the harbor freight unit, 8 years old and it still works well, but I LOVE this new 6 gal unit. (The brad nailer works well too...) As far as compressors go, it is reasonably quiet, but don't expect to carry on a conversation while it's running!
Answered by: clconnect
Date published: 2015-12-08

Can this set put concrete nails into concrete to secure my transitions from carpet to laminate and laminate to tile

Asked by: DOitURSELF14
No it will not nail into concrete.
Answered by: SBD_Product Expert
Date published: 2015-09-20

Will this compresser run a 5" orbital sander continually with one slowing down?

Will this compresser run a 5" orbital sander continually with one slowing down?
Asked by: Kunta
The question should be will it run a 5" pneumatic orbital sander without slowing/boggling down?
Answered by: Kunta
Date published: 2017-03-16

can this compressor support a heavy duty framing gun

Asked by: Howieegie
I purchased one of these compressors a few years ago. I liked it for my uses so when it got stolen a while back, I bought another one. I use it for texturing, almost any carpentry work where two inch nails or shorter are used and any other time I need air. I have built many out buildings, residential remodels, even a couple of forts and tree houses. I have used my framing gun whoile some one else was using a pin tacker and never waited for air, but the compressor worked all day. It will support a single framing gun depending on your speed when working. find the lowest pressure you can still drive 16d.
Answered by: Windancer
Date published: 2017-02-07
  • y_2017, m_5, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_203471324, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 87ms

Customer Reviews

6 Gal. Portable Electric Air Compressor and 18-Gauge Brad Nailer Combo Kit is rated 4.5 out of 5 by 97.
Rated 4 out of 5 by from Brad nail gun was easy to use & does the... Brad nail gun was easy to use & does the job.
Date published: 2017-03-07
Rated 5 out of 5 by from Reliable compressor and very capable brad nailer. I bought the compressor to run a narrow crown stapler that I already had. My project is on a ranch and what I am working on has to be powered by a gas generator. My 2000W generator ran this compressor with no problem, the big surprise is what this brad nailer was capable of doing with 2" brad nails, the compressor and nailer ran flawlessly for about eight hours a day for three days and I drove more than 10,000 2" brads with no problems, the little nailer that was just part of the package literally saved my trip, when the old crown stapler non porter cable quit. I now want all of the other Porter Cable nailers and staplers.
Date published: 2012-12-11
Rated 5 out of 5 by from Great compressor! I bought this kit about 3 years ago. I've used it to do a bunch of trim work in the house and it has helped build shelves. This comprossor is great, I haven't had any problems with it. It was always provided a lot of power. It is a bit loud because it is an oiless compressor, but I think this is a great deal for the price. If you don't have a comprosser, does it ever make the job easier! My father was doing a bunch of trimwork without one, I convinced him to buy this kit as well and he couldn't be any happier!
Date published: 2008-11-16
Rated 4 out of 5 by from For blowing out inground sprinkler system I was looking for an inexpensive compressor to blow out my in ground sprinkler system for the winter shutdown. This in not one of the monster ones the installer uses but I found that this compressor could blow out my system one zone at a time. The installer was doing three zones at a time. This one cost less than the price the installer charged me to do one fall shutdown, so it paid for itself on the first usage. It did not damage any of my plumbing (the install did blow out a section of pipe one year when he did the fall blowout). Given that I will probably only use it once a year and it has already paid for itself. This one is a winner for me. Hopefully this review is useful to you!
Date published: 2015-12-30
Rated 3 out of 5 by from Good Compressor I have owned this compressor for a good six years and it lasted right up to a week ago. It was always a good reliable unit and it was used with a brad nailer for trim and with a stanley flooring nailer. Even though this compressor burned out I still think it was a good unit. I don't think that these type of things are the kind of tools that last forever due to the oilless motor but for the $229 including a nailer and all the other parts I don't think you can get much better.
Date published: 2009-11-08
Rated 5 out of 5 by from Works Great I needed a compact oilless compressor for the pneumatic can crusher I made and general use if I need and this fit the bill and was on sale also. One recommendation is to tighten the fittings on the tank and the air hose connection fittings prior to using. A little prevention just in case.... It works great and no issues!
Date published: 2016-01-12
Rated 5 out of 5 by from Flawless Should have bought this 20 years ago. This product worked flawlessly putting down shoe molding. Saved me 2 hours. Not one misfire or bent nail. Quality product all around.
Date published: 2013-03-12
Rated 4 out of 5 by from Excellent Compressor Works great! It's nice and light and handles great.
Date published: 2012-11-24
  • y_2017, m_5, d_23, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_97
  • loc_, sid_203471324, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 204ms