Model # 034-0197RP

Internet #202592809

Powermate 100 - 130 psi Pressure Switch
0846212004579

Powermate

100 - 130 psi Pressure Switch

$20.46 /each

Frequently Bought Together

Product Overview

The Powermate pressure switch is part of the large line of Powermate genuine replacement parts. A pressure switch regulates air pressure in the compressor. Replace a pressure switch with a new Powermate pressure switch if the compressor motor is cutting out or not turning on at the proper psi.

  • 100 - 130 psi
  • 4 port with bleeder
  • Powermate pressure switch is durable and long lasting
  • New Powermate pressure switch allows air compressor to run at its most efficient capacity, turning on and off the motor at the correct psi

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

10 Questions24 Answers

Customer Questions & Answers

100 - 130 psi Pressure Switch
100 - 130 psi Pressure Switch

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 100 - 130 psi Pressure Switch
 
4 answers

can I set this switch up to cut on at 70 and cut off at 100

This question is from 100 - 130 psi Pressure Switch
Asked by
Hopkinsville KY
Read all my Q&A
June 4, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
California
Read all my Q&A
Home Improvement Profile: DIYer
April 7, 2015
Answer: 
No, this one was preset to 100 psi on and 130 psi off. There no instructions for making adjustments to those settings.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Columbus, OH, USA
Read all my Q&A
January 31, 2015
Answer: 
It is not advisable to adjust the pressure cut off and start unless you know what you aRE DOING
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Winfield IL
Read all my Q&A
July 29, 2014
Answer: 
No. It is pre set to cut off at around 125 psi.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Long Grove
Read all my Q&A
Home Improvement Profile: Professional
June 5, 2014
Answer: 
Our Powermate 100-130 PSI pressure switch is preset at the factory and the setting cannot be adjusted.
We do offer a pressure switch that is preset at 70/100, part number 034-0081. The part may be ordered through our local Service Center. Please dial our toll free consumer line @ (888)-895-4549 for more information.
Thanks,
customercare@matholdingsinc.com
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
This question is from 100 - 130 psi Pressure Switch
 
4 answers

Does this switch operate on 110v or 220v?

This question is from 100 - 130 psi Pressure Switch
Asked by
Read all my Q&A
May 19, 2014
I have a 60 gallon single stage compressor Campbell Hausfeld 220v
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
California
Read all my Q&A
Home Improvement Profile: DIYer
April 7, 2015
Answer: 
I used it for 220 V. You could use just one pole of the switch for 110 V.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Columbus, OH, USA
Read all my Q&A
January 31, 2015
Answer: 
the voltage should not be a problem .
But the amperes drawn by the motor should be paid attention to.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Winfield IL
Read all my Q&A
July 29, 2014
Answer: 
Have to look at the voltage of the pressure switch before ordering it. Mine was 229v.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Long Grove, IL
Read all my Q&A
Home Improvement Profile: Professional
May 27, 2014
Answer: 
The Powermate 100-130 PSI pressure switch will operate on 120 volt or 230 volt depending on the air compressor. It needs to be based on the rated working pressure of the air compressor (turn on 100 PSI and turn off at 130 PSI).
We cannot validate if this pressure switch will work on your air compressor since we do not manufacture this brand.
Please consult your owner's manual for proper working Read More
The Powermate 100-130 PSI pressure switch will operate on 120 volt or 230 volt depending on the air compressor. It needs to be based on the rated working pressure of the air compressor (turn on 100 PSI and turn off at 130 PSI).
We cannot validate if this pressure switch will work on your air compressor since we do not manufacture this brand.
Please consult your owner's manual for proper working pressure for your air compressor.
Thanks,
Customercare@matholdingsinc.com Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 100 - 130 psi Pressure Switch
 
4 answers

Does bleeder bleed pressure off of compressor so it can start easier?

This question is from 100 - 130 psi Pressure Switch
Asked by
Dave
September 22, 2013
My old Campbell Hausfeld has a check valve and bleeder. Can the bleeder tube be hooked to this switch?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Columbus, OH, USA
Read all my Q&A
January 31, 2015
Answer: 
No sounds like your check valve or safety release might be leaking.
Spray with soapy water to check for leaks.
The 1/4 inch sensing line should come from the main tank pressure.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Winfield IL
Read all my Q&A
Home Improvement Profile: DIYer
July 29, 2014
Answer: 
As far as I know it does.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Austin, TX, USA
Read all my Q&A
November 5, 2013
Answer: 
The bleeder valve is used to bleed water from the tank
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Long Grove, IL
Read all my Q&A
September 24, 2013
Answer: 
Hello!
Thank you for your question. This switch does come with a bleeder. There will be a black push to connect fitting on the underside for the bleeder line.
Thank you!
Customer Care
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
This question is from 100 - 130 psi Pressure Switch
 
3 answers

when my compressor reaches max air the presure switch bleeds down then it kicks back on why

This question is from 100 - 130 psi Pressure Switch
Asked by
compressor
hampton
August 13, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Columbus, OH, USA
Read all my Q&A
January 31, 2015
Answer: 
You might have a leak
Spray with soapy ware after you unplug the unit.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Austin, TX, USA
Read all my Q&A
November 5, 2013
Answer: 
Sounds like you have a leek on the pressure switch seal. Most seals are not replaceable just change the switch
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Long Grove, IL
Read all my Q&A
August 20, 2013
Answer: 
Hello,
Thank you for your question! Can you please send and email to customercare@mathold.com with your contact information so we can discuss your issue with the compressor?
Thank you so much! We look forward to hearing from you.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
2 »
  • 2016-10-31 T16:25:38.798-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202592809, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 113ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 16 reviewers.
Rated 4.0 out of 5.0 by Valve tech expertise Installed on a Hitachi 6gallon compressor works great No long term usage yet ,use 1/4 inch plastic hose for the sensing port The 1/4 npt ports are for gauges or interconnecting to another compressor and or mounting. Sugest plugging the ports ,use the plugs provided. Had to modify the plastic housing to fit it on January 31, 2015
Rated 3.0 out of 5.0 by Compressor pressure switch The switch wire up differently the original one so make sure to ohm test before wiring it up. The compressor doesn't kick on till about 80psi but shuts off right at 130 psi. I messed with the switch trying to get it to kick on at a lower so I'm sure it voided the warranty but other than that it works great! If it kicked on at a higher pressure it would have gotten a much better rating. April 5, 2016
Rated 5.0 out of 5.0 by Fast and easy great price, fast delivery easy to install/ I would order again online November 3, 2015
Rated 4.0 out of 5.0 by A quality replacement for original pressure switch at much less cost than OEM pricing Too early to tell whether or not there is any long term quality issues. The switch is functioning as intended after my replacement. The only suggestion that I have is that it would have been helpful to have a generic instruction sheet included to outline the intended use of the various ports in the valve and to detail the type of pipe connection provided for the bleeder port. I had to call the manufacturer for technical explanation and direction which an instruction sheet might have provided. November 4, 2014
Rated 3.0 out of 5.0 by So far it works great. However, I could not remove a pre-installed pipe plug. I have no complaints on the quality appearance and operation of the switch so far. However, it came with a pipe plug installed in one of the ports. When I tried to remove it, the broach stripped. I was confused why it would be so tight and why it was installed when it came with 2 additional spare plugs in a bag. Anyways, I got everything to work by using a T to make up for the lost port. I should probably add that I used this switch on an older air compressor of a different brand... so maybe the port was supposed to be plugged. February 13, 2014
Rated 5.0 out of 5.0 by Pressure switch This was an exact replacement for the pressure switch on my air compressor. Easy to install too. April 7, 2015
Rated 5.0 out of 5.0 by Pressure Switch Very fast shipping! Switch was easy to install. Quality switch. March 26, 2015
Rated 5.0 out of 5.0 by PSI Pressure Switch This was the easest pressure switch I have ever installed. There are four sets of screws on the switch for power. The top set of screws is power or line. the bottom set of screwss are for the motor and they are marked motor. The flex line coming off of the tank attaches to the air line in the bottom of the switch. July 29, 2014
  • 2016-10-31 T16:29:35.492-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_202592809, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • REVIEWS, PRODUCT