Model # 034-0226RP

Internet #202592803

Powermate 105 - 135 psi Pressure Switch
0846212004593

Powermate

105 - 135 psi Pressure Switch

$18.85 /each

Frequently Bought Together

Product Overview

The Powermate pressure switch is part of the large line of Powermate genuine replacement parts. A pressure switch regulates air pressure in the compressor. Replace a pressure switch with a new Powermate pressure switch if the compressor motor is cutting out or not turning on at the proper psi.

  • 105 - 135 psi
  • 4 port with bleeder
  • Powermate pressure switch is durable and long lasting
  • New Powermate pressure switch allows air compressor to run at its most efficient capacity, turning on and off the motor at the correct psi

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

What is the amp rating on this device

Asked by: Anonymous
I'm using it on a 13 Amps Motor at starting demand sometimes reaches 25 amps.
Answered by: Victor
Date published: 2015-09-17

Are there any instructions? Which connections are for positive which for negative? I mean com...

Are there any instructions? Which connections are for positive which for negative? I mean come on some simple directions would answer almost all questions and save you and me a lot of time and frustration!!!!
Asked by: DZ
The markings on this pressure switch are LINE (incoming power) and MOTOR, (interconnect cord from the motor to the switch). This switch does not have a positive or negative. Your incoming power attaches to the TOP connections marked LINE, the interconnect cord from the motor connects to the BOTTOM connections marked MOTOR. Thank you.
Answered by: ProductExpert
Date published: 2017-01-30

Does this switch come with the unloader valve?

Asked by: Gar
No, it is not included.
Answered by: CommunityAnswer
Date published: 2016-11-07

my prresent switch is set to go on at 90 psi and go off at 125 psi. I have a 22 gallon tank. Will this damage my tank?

I am concerned about damaging my tank or blowing it up. The compressor I have now is an old Campbell Hausfeld and I can't get an exact switch from the company so I am considering one of these. Thanks.
Asked by: paultheartist
This pressure switch we do not recommend for you unit. If you call our technical support line at 888.895.4549 we can see if there is one we can offer to you that might work after we get a few more details for you.
Answered by: ProductExpert
Date published: 2016-10-06
  • y_2017, m_3, d_26, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_, sid_202592803, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 52ms
  • QUESTIONS, PRODUCT

Customer Reviews

105 - 135 psi Pressure Switch is rated 4.2 out of 5 by 28.
Rated 1 out of 5 by from the push fit line at bottom of unit is fine but....when using a Nylon line up to the head of the ... the push fit line at bottom of unit is fine but....when using a Nylon line up to the head of the pump the line will not accomadate the heat from the head so this is a problem..plus because of the heat differential along with the Nylon line its impossible to keep the line tight up to the union on the head... the engineering design is off and after talking to respective people at Condor they didnt seem to know or be able to explain the issue for me... and this particular unit was not unloading properly. the unit looks well made construction wise but it didnt function properly plus their we not any trouble shooting instructions with the unit. I am sure their maybe specific applications for this unit but it will not work with the older style compressor and their were not any instructions to the installer about potential problems and its associative impact on the total function of the unit...I also replaced the check valve and that didnt seem to eliminate any of the problems with the switch
Date published: 2016-11-01
Rated 4 out of 5 by from Switch had a different electric connection from the original. Had to drill a hole to fit my elec... Switch had a different electric connection from the original. Had to drill a hole to fit my electric conduit. I did not make a second hole for the electric motor cord and use the bottom cord clamp. Switch worked good and cuts off at 150PSI
Date published: 2017-01-03
Rated 5 out of 5 by from Great value The pressure switch was very easy to install. It shut down at 135 PSI, just where it was suppose to. . No real adjustments needed after install.
Date published: 2016-10-17
Rated 5 out of 5 by from easy switch, Doug. in Horsham. Pa. Went in, in about 5 min easy replacement.works as it did when it was New 17 years ago
Date published: 2017-03-07
Rated 5 out of 5 by from Better than the original! Easy installation! Came with all the plugs and pieces necessary. The original used a copper line with compression fittings on one end and a flared fitting on the other. This new switch uses a push in plastic line (like used on commercial trucks), MUCH NICER AND EASIER!. I shopped around, and a similar switch was going to cost at least 3 times as much as this one. A GREAT BARGAIN! Functions flawlessly!
Date published: 2012-05-15
Rated 4 out of 5 by from Works good Wired it up to my old Colman compressor, works great. Was little different pluming wise but I made it work.
Date published: 2016-09-06
Rated 4 out of 5 by from Pressure switch A perfect replacement for a broken one on my Husky compressor.
Date published: 2016-09-20
Rated 4 out of 5 by from Pros and cons Product does what it is basically designed to do. Switch or my gauges are off by about 7 psi. Gauges were dead on before old switch failed. Although easy to install and figure out it would be nice to have a wiring diagram included so you know what goes where. Wired slightly different then old switch was.
Date published: 2014-02-18
  • y_2017, m_3, d_26, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_, sid_202592803, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT