Model # 034-0199RP

Internet #202592805

Powermate 145 - 175 psi Pressure Switch
0846212004586

Powermate

145 - 175 psi Pressure Switch

$1707 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Powermate pressure switch is part of the large line of Powermate genuine replacement parts. A pressure switch regulates air pressure in the compressor. Replace a pressure switch with a new Powermate pressure switch if the compressor motor is cutting out or not turning on at the proper psi.

  • 145 - 175 psi
  • 4 port with bleeder
  • Powermate pressure switch is durable and long lasting
  • New Powermate pressure switch allows air compressor to run at its most efficient capacity, turning on and off the motor at the correct psi

Specifications

Dimensions

Product Depth (in.)
4.88
Product Height (in.)
9.5
Product Width (in.)
3

Details

Accessory Type
Other
Maximum Pressure (psi)
175
Product Weight (lb.)
0.9lb
Returnable
30-Day
Tools Product Type
Test Equipment Part/Accessory

Warranty / Certifications

Manufacturer Warranty
1 Year Warranty

More Products With These Features

Search

Customer Questions & Answers

wiring diagram for powermate 125-155PSI pressure switch

putting in a new pressure switch. please forward the wiring diagram to me please.
Asked by: Anonymous
You have a white and a black wire from the motor and the power input cord, put one white from the power input in the lower post on that side - then put the same color from the motor right above the other white wire. Do the same on the other side with the black wires. The green is grounded on the screws by the inlet and outlet for the power connections.
Answered by: steve
Date published: 2015-09-20

Does this only fit one type of air compressor or brand of air compressor or can I put it on my craftsman

Asked by: kiddkool64
I purchased two and installed them on different brand compressors. You would need to check the compressor pressure ratings before buying, so as not to over pressurize.
Answered by: Rob
Date published: 2017-06-13

power rating?

i have a husky 6 gallon and i believe the switch went bad will this work as a replacement for it?
Asked by: husky
rated to be set up as-220 Volt single phase
Answered by: Rob
Date published: 2017-06-13

Is the pressure cutoff adjustable? I need 150 PSI but 175 might be a little too much.

Asked by: Vee
Yes, it can be reset by removing the cover and turning the screw marked- + to - counterclockwise. Note before removing cover, disconnect the power to keep from getting shocked. Once you have backed the phillips head adjustment screw counterclockwise in the minus direction at least 4 complete turns, you can replace the cover and re energize the system,and if necessary dump some air from the tank to get the pressure low enough to start the compressor. Once the compressor starts, watch the pressure gauge,and if it is going over 150 psi, you may need to back the adjusting screw off another turn. Repeat the sequence unit the compressor is shutting off within 5 lbs plus or minus of your 150 set point.
Answered by: Rob
Date published: 2017-07-24
  • y_2017, m_8, d_18, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_202592805, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • QUESTIONS, PRODUCT

Customer Reviews

145 - 175 psi Pressure Switch is rated 4.6 out of 5 by 21.
Rated 5 out of 5 by from I bought this pressure switch to replace the one that had gone out on my compressor. It worked gr... I bought this pressure switch to replace the one that had gone out on my compressor. It worked great and brought new life to it. I ordered extra replacements just in case. Great product and great price! Thank you so much. PS. Customer service was a great help with my order.
Date published: 2017-08-02
Rated 4 out of 5 by from It was better quality than the Craftsman switch that came... It was better quality than the Craftsman switch that came on the unit. The reason for replacement was the new compressor switch would not hold the 220 wire secure.
Date published: 2017-07-26
Rated 5 out of 5 by from Quality Staff at home depot are awasome my priduct got to me just in time and it was exactly what. I had ordered
Date published: 2017-05-24
Rated 5 out of 5 by from Dewalt repair Exact replacement part for the Dewalt air compressor. Works great, easy to install and very affordable.
Date published: 2017-06-06
Rated 4 out of 5 by from easy installation, proper operation ,I'm pleased... easy installation, proper operation ,I'm pleased
Date published: 2017-08-01
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-21
Rated 5 out of 5 by from Perfect oem replacement. No problems.... Perfect oem replacement. No problems.
Date published: 2017-08-01
Rated 5 out of 5 by from Easy to install, and setup. Easy to install, and setup.
Date published: 2017-06-13
  • y_2017, m_8, d_18, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_, sid_202592805, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 140ms
  • REVIEWS, PRODUCT