Model # 009-0367CT

Internet #202591391

Powermate Air Sandblaster with 50 lb. Hopper
0846212000038

Powermate

Air Sandblaster with 50 lb. Hopper

  • Ceramic nozzle that resists the abrasiveness
  • Provides a quick cleaning option
  • Long life and durable
$7408 /each

Frequently Bought Together

Product Overview

Powermate air sandblaster with 50 lb. hopper is perfect for removing rust, scale, and paint; or etching glass and weathering wood. Gun is constructed of lightweight aluminum with a comfortable pistol grip handle design, providing superior operator control. Use with silica or hard sand, nutshells, metal shot, or other abrasives.

  • Gravity feed system assures a continuous positive flow of blasting material
  • Hopper is equipped with built-in handle and hose hooks
  • Includes sandblast gun with ceramic nozzle, 3 air jets (1/8 in., 3/32 in., 5/64 in.), 50 lb. hopper, 14 ft. x 3/8 in. rubber hose, allen wrench, hose clamps, ANSI approved safety goggles, and dust hood
  • Non bleeder type gun

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Will sand blaster remove oil base paint from a metal door?

Asked by: Anonymous
This is just a tank
Answered by: Jose
Date published: 2017-01-27

Will this sandblaster remove paint from a painted stone fireplace?

Asked by: RD
Yes, based on my experience. However...if the brick is anything other than "chicago common" type, you'll probably do damage to the surface. Also...this makes a GIGANTIC mess! You will have sand blaster media EVERYWHERE. Try a chemical stripper first...or call a professional.
Answered by: soylentgreen
Date published: 2017-05-09

I need to remove 50 Years of Sun Baked multi-layered Paint from a cement/stucco exterior. Can th...

I need to remove 50 Years of Sun Baked multi-layered Paint from a cement/stucco exterior. Can this be done, will it damage the cement exterior?
Asked by: OLDpaintSTEPHEN
I'd use a chemical paint stripper. Look at Radonseal.com. They have a stripper you can spray on with a spray bottle. Then wash it down with a power washer (high pressure water).
Answered by: soylentgreen
Date published: 2017-05-09

Will this work on crawspace wood subfloor and wood joists?

I need to clean them, I don't care about the appearance. They need a good scrub and removal of top layer.
Asked by: Frank
Too much debris everywhere.
Answered by: Consumer
Date published: 2017-03-14
  • y_2017, m_6, d_23, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_47
  • loc_, sid_202591391, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 126ms
  • QUESTIONS, PRODUCT

Customer Reviews

Air Sandblaster with 50 lb. Hopper is rated 2.6 out of 5 by 18.
Rated 1 out of 5 by from Pretty much worthless. One must have a very large compressor for it to even function. I tried mul... Pretty much worthless. One must have a very large compressor for it to even function. I tried multiple mediums with minimal success. Literally less work to sand off paint and rust. You get what you pay for, in this case a 50 dollar paperweight.
Date published: 2017-03-14
Rated 1 out of 5 by from Dont' buy it The gun in this kit is junk. Very cheap pot metal, poor machining, and just plain doesn't work. I tried 2 different medias, with the same result. Have disassembled and reassembled the gun numerous times to figure out what is going wrong, but to no avail. The plastic hopper is nice, but if the gun won't pull the media, what's the point. I even shortened the hose to 3 feet, but still only get a few seconds of sand, then nothing but air coming out the nozzle. Buy a different product.
Date published: 2016-07-08
Rated 2 out of 5 by from Kinda works. Not durable at all. If you have a job you can get done with this in an hour or two a... Kinda works. Not durable at all. If you have a job you can get done with this in an hour or two and then you plan to toss it in the trash, go for it. I used Back Bull no. 80 garnet in mine. It lasted about two hours before the ceramic nozzle insert had a few holes blown in the side of it. Maybe glass beads would be better? The garnet was right out of the pot...so I know it was dry. The flow was intermittent. I'm using an 80 gal/5hp compressor. It is very easy to set up, though. You can be up and running in five minutes right out of the box. You will need a male air nipple (sold separately). I had a 9 sqft area of brick I wanted to remove paint from. I got about 2/3 of the way done before the blaster gave up the ghost. The nozzle provides a very narrow stream of abrasive. It was pretty slow going.
Date published: 2017-05-09
Rated 4 out of 5 by from We have not used it yet but it looks like... We have not used it yet but it looks like it is going to do exactly what we want.
Date published: 2017-05-20
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-04
Rated 4 out of 5 by from Good for light blasting projects... Good for light blasting projects
Date published: 2017-03-07
Rated 1 out of 5 by from Please DO NOT buy this product This product deserves 0 stars. I had read the reviews and some reviewers gave it a good rating. I figured after 45 years as a mechanical engineer and numerous patents that if anyone could make this work then I could. Wrong, wrong, wrong. I have spent the last 2 days trying to get this piece of Chinese junk to work with absolutely no success. My air compressor is 60 gallons and plumbed to deliver over 25 scfm of air at 90 psig with a centrifugal air filter/dryer rated at 98% efficiency, even threw in another dryer at the end of the line. Living in Colorado where if the humidity is at 10% everyone complains about how damp it is two dryers are more than enough. All I ever got was a stray bit of sand. I bought this about 9 months ago and just yesterday needed to use it so I believe it is non-returnable. I truly do believe that the good ratings were bought. I'd say this sandblaster sucks but it being a siphon feed sand blaster I would be very happy if it did suck. I challenge Powermate to prove me wrong.
Date published: 2016-08-10
Rated 4 out of 5 by from Works great if used properly I had great success with this but you have to follow some basic rules. First, It needs a ton of air. I was shooting 5cf at 50psi. Anything less won't work. I was using glass beads on my pool/spa tile. It took 15 years of white off. Second, you must use a dryer. I used throwaway ones from HF for $1.99.
Date published: 2012-06-28
  • y_2017, m_6, d_23, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_, sid_202591391, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • REVIEWS, PRODUCT