Model # F-767

Internet #203610329

Pro-Lift 2 Ton Low Profile Floor Jack


2 Ton Low Profile Floor Jack

$4629 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Low Profile floor jack is ideally designed to be able to fit under low ground clearance vehicles. This jack can fit under a clearance of 3-1/2 inches and maneuvers easily into position, and is a very cool addition to any garage. The solid steel construction and safety release valve were features included to secure user safety.

California residents: see   Proposition 65 information

  • Extra low profile
  • Lifting range: 3-1/2 in. to 14 in.
  • Pro-lift hydraulic floor jacks meet or exceed 2009 ANSI/PALD requirements
  • Patented bypass device protects against over pumping for safe operations
  • Built-in safety valve provides overload protection
  • Heavy duty steel construction provides long term durability




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

my pump is starting to leak fluid at the nut. is there a replacement seal to go inside? if so where to purchase?

Asked by: Nek
Call factory service for parts and or service. Chucked manual. Call the store.
Answered by: SONAR1
Date published: 2016-11-26

Can this handle a full size SUV, to be specifc a Toyota Sequioa?

Example: I have looked at the manual and can't figure out what I did wrong.
Asked by: WRT

Product dimensions

Can you tell me what the physical dimensions of the product is - specifically the width of the jack and the width of the lift arm? Thanks.
Asked by: Simon

what type of oil does Model P-2395-M use?

Asked by: Tom
  • y_2017, m_7, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_203610329, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms

Customer Reviews

2 Ton Low Profile Floor Jack is rated 4.5 out of 5 by 21.
Rated 5 out of 5 by from Spare jack Needed a LOW CLEARANCE jack that I hope I never need. Looked everywhere and this was the best. I have played with it and it seems to work fine. Would buy this same unit again
Date published: 2017-06-28
Rated 5 out of 5 by from Worked great Arrived on time seems very sturdy and well built, fit perfect under my car and lifted it enough. I'd recommend this to anyone looking for a good buy at a good price.
Date published: 2017-07-04
Rated 4 out of 5 by from Worked well Worked perfect to get under my low Austin Healey. Had to improvise a bar until lifted a few inches since supplied bar shape did not have clearance
Date published: 2017-07-04
Rated 5 out of 5 by from Good product Its doing its job no complaints here stealthy and does the job right
Date published: 2017-06-20
Rated 5 out of 5 by from Better than 1-1/2 ton aluminum jack from Harbor Freight Purchased this floor jack to replace a 1-1/2 ton aluminum jack from Harbor Freight because the aluminum jack outer frame got bent due to a lateral load. Both jacks had the same lifting range of 3-3/4 inch to 15 inch. I was expecting 14 inch but when it arrived, the box stated 15 inch. When I measured the maximum lift, it was indeed 15 inch so I suspect the company redesigned the jack and Home Depot didn't update their webpage. Using my bathroom scale, this steel jack's weight was only 2-3/4 pounds more than the aluminum jack (29.4 lbs vs. 26.8 lbs) but the steel jack lifting capacity is 4,000 lbs versus 3,000 lbs plus the steel frame is an angled plate which will resist a lateral load. The 1-1/2 ton aluminum jack frame from harbor freight are only two flat aluminum plates which can easily bend. A lateral load can happen if you jack the car up on the front end and since the car is at an angle, there is a tendency to roll backwards if you don't block the rear wheels. In this situation, a lateral load is placed on the jack and unfortunately for me, I bent the aluminum jack. One drawback to this steel jack: You must remove the handle to operate the valve while the 1-1/2 ton aluminum jack you only need to turn the handle. Here is a photo of my bent aluminum jack and this 2 ton jack side by side.
Date published: 2015-11-20
Rated 5 out of 5 by from Good Jack. Got it home read instructions and discovered that the Hydraulic Fluid Cap was missing.... Good Jack. Got it home read instructions and discovered that the Hydraulic Fluid Cap was missing. Tested Jack anyway and it pumped up fine and held the load. Called Co. service Dept. and they agreed to send me a cap(plug) asap. They did. The Service Guy asked if the box was oily since with no cap fluid should have leaked if the box was turned over. I guess it got through shipping with the orientation the factory put it in. Miracles happen I guess. Jack fits under my Scion XB with some room to spare(all the way under). My Rockers on one side are rotting out hence a floor jack in case of a flat. A little heavy cause it's not "Plastic"! Overall a good experience. Parts are available from the Company.
Date published: 2016-11-02
Rated 5 out of 5 by from works for my BMW335i so far so good Used 4-5 times in 9 months since bought and so far so good. Low profile size is suitable for my bmw335i ground clearance. If successfully raised your car, the maximum height is able to reach 14" high, which is enough for your oil change, coolant change, transmission oil change, etc. You can ask more for such a price. One thing is very important is you need to turn oil pump knob right to the dead end when lifting your jack, otherwise, it will be leaking half way and can not go far. I am satisfied with this purchase anyway and hope it will last for 2 years.
Date published: 2014-08-24
Rated 5 out of 5 by from low profile floor jack perfrct finally got to put jack to use on low clearance car for brake change, worked just fine. not heavy & bulky to spin like other floor jacks. great quality and price
Date published: 2013-07-17
  • y_2017, m_7, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_, sid_203610329, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms