Project Panels Red Oak Plywood (Price Varies by Size)-1994 - The Home Depot

Project Panels

Model # 1994

Internet # 204311240

Red Oak Plywood (Price Varies by Size)

Project Panels Red Oak Plywood (Price Varies by Size)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$12.99 / each


Model # 1994

Internet # 204311240

PureBond plywood project panels are a convenient and cost-effective way to build cabinets, furniture and other woodworking projects. Made in the USA with sustainably-harvested American hardwoods, they provide a beautiful wood veneer face bonded to a strong and flat wood core. These PureBond project panels are made with no added formaldehyde, eliminating the concern about off-gassing dangerous fumes during fabrication or when installed in your home. Their smaller size makes them easy to handle and allows you to order just the amount of wood you need. PureBond plywood, in project panel sizes or in full sheet sizes, are a Home Depot exclusive.

California residents: seeProposition 65 information

  • Made in the USA
  • Decorative red oak veneer applied to only the face side of this panel, the back of the panel is not intended to be exposed
  • B-4 rotary cut red oak - 3 ply construction
  • Light weight, all-wood veneer construction
  • Precision-cut hardwood plywood panels in convenient small sizes
  • DIY Pet Food Container Instruction Manual
    DIY No Sew Lap Desk Instruction Manual DIY Key Holder Instruction Manual
    DIY Upholstered Footstool Instruction Manual DIY Wall Pocket Instruction Manual
    DIY Serving Tray Instruction Manual DIY Bench Instruction Manual
    DIY Candle Holder Instruction Manual DIY End Table Instruction Manual
    DIY Wall Cabinet Instruction Manual DIY Large Desk Instruction Manual

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Actual product thickness (in.)  .203  Actual product width (in.)  24 
Assembled Depth (in.)  48 in  Assembled Height (in.)  .203 in 
Assembled Width (in.)  24 in  Product Length (ft.)  4 ft 
Product Thickness (in.)  1/4 in  Product Width (ft.)  2 ft 
Plywood Type  Hardwood Plywood  Pressure Treated  No 
Returnable  90-Day  Stainable/Paintable  Stainable & Paintable 
Tounge and Groove  No 
Warranty / Certifications
Manufacturer Warranty  Product warranted against glue or bond failure. Product replacement provided. 


Rated 4.8 out of 5 by 10 reviewers.
Rated 5 out of 5 by Unusual Use My water cooler once had 1/4 inch plywood around it in the screen slots (where the screen frame goes). Over the years it had disintegrated leaving gaps and holes for bugs to get in. My roommate even put a piece of sheet foam in to close some of the gap. I took a piece of cardboard 2x4 feet, the size of the plywood, to make sure that 2x4 was enough to do the job, and cut it to fit the hole around the cooler. When I got the plywood, I used the cardboard for a template to cut the plywood. I still have some caulking to do on the seams, but it's better than what was there before. October 3, 2013
Rated 5 out of 5 by Very Good Quality Oak I ordered these to use as risers for a staircase that I rebuilt over the existing one. They worked perfectly and matched the oak stair treads that I also purchased at HD. I ordered 5 boards and there was not a defect on any of them. The quality was very good and it ended up saving me quite a bit of money by cutting these boards myself (3 risers in each board) vs. buying the risers at $18-20 each. the cost was very reasonable although you do have to pay a special shipping charge. I would highly recommend. January 28, 2014
Rated 4 out of 5 by Nice product Good looking plywood in very useful sizes. Delivered in a week in very good condition October 28, 2014
Rated 5 out of 5 by My favorite plywood This isn't the typical plywood you find in home centers. This is excellent quality veneered plywood. I really like the MDF cores. It keeps the sheet really flat. It does make it a bit heavier, but that is an advantage in some situations. The veneers on both faces are excellent; but one side is slightly nicer than the other. I chopped this piece up pretty good and was not able to find a single void Highly recommended October 6, 2014
Rated 5 out of 5 by Just the right size you need for projects. Here's a product that comes in just the size you need without having to deal with full sheets, extra expense, and waste. It's easier to transport, and not too heavy. I received one of the 2x4 panels, Red Oak, in 3/4" thickness. The 3/4" ply was strong enough to be used as shelving and would work fine for any type of sturdy application. Be sure to use a fine plywood blade in the circular saw to get a nice fine cut, with very little splintering. Edges sanded fine. Veneer is a good thickness. I did not have a chance to finish mine yet, but it appears that both sides of this sheet are ready for some stain and several coats of Varathane (or equivalent). Good quality grain. It handled screws with no issues so the quality of the laminates and layers were good (no pockets). Overall, it got the job done, and looks great to boot! February 8, 2014
2 >>


Standard Shipping includes delivery by small parcel service. Orders for this item may be expedited for an additional fee.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.