Project Panels White Oak Plywood (Price Varies by Size)-2052 - The Home Depot

Project Panels

Model # 2052

Internet # 204311233

White Oak Plywood (Price Varies by Size)

Project Panels White Oak Plywood (Price Varies by Size)

This item has been discontinued.
The Home Depot no longer carries this specific product.
Please select another option below.

$12.99 / each


Model # 2052

Internet # 204311233

PureBond plywood project panels are a convenient and cost-effective way to build cabinets, furniture and other woodworking projects. Made in the USA with sustainably-harvested American hardwoods, they provide a beautiful wood veneer face bonded to a strong and flat wood core. These PureBond project panels are made with no added formaldehyde, eliminating the concern about off-gassing dangerous fumes during fabrication or when installed in your home. Their smaller size makes them easy to handle and allows you to order just the amount of wood you need. PureBond plywood, in project panel sizes or in full sheet sizes, are a Home Depot exclusive.

California residents: see  Proposition 65 information

  • Made in the USA
  • Decorative white oak veneer applied to only the face side of this panel, the back of the panel is not intended to be exposed
  • B-4 plain sliced white oak - 3 ply construction
  • Light weight, all-wood veneer construction
  • Precision-cut hardwood plywood panels in convenient small sizes
  • DIY Pet Food Container Instruction Manual
    DIY No Sew Lap Desk Instruction Manual DIY Key Holder Instruction Manual
    DIY Upholstered Footstool Instruction Manual DIY Wall Pocket Instruction Manual
    DIY Serving Tray Instruction Manual DIY Bench Instruction Manual
    DIY Candle Holder Instruction Manual DIY End Table Instruction Manual
    DIY Wall Cabinet Instruction Manual DIY Large Desk Instruction Manual

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Actual product thickness (in.)  .203  Actual product width (in.)  24 
Assembled Depth (in.)  48 in  Assembled Height (in.)  .203 in 
Assembled Width (in.)  24 in  Product Length (ft.)  4 ft 
Product Thickness (in.)  1/4 in  Product Width (ft.)  2 ft 
Plywood Type  Hardwood Plywood  Pressure Treated  No 
Returnable  90-Day  Stainable/Paintable  Stainable & Paintable 
Tounge and Groove  No 
Warranty / Certifications
Manufacturer Warranty  Product warranted against glue or bond failure. Product replacement provided. 


Rated 4.3 out of 5 by 21 reviewers.
Rated 1.0 out of 5.0 by Very disappointed This piece of bright burgundy red wood is obviously not white oak. It looks (and smells) exactly like cedar. Also, both sides are pocked with substantial rough holes in the surface. It is substandard for the facing of the cabinet project I am working on, and now I have to waste my time to return it while my project remains unfinished. The lack of expertise at home depot is frustrating. Not too long ago we were told by an employee that a board was maple because it contained sap, when in fact it was pine and contained pitch. I am so discouraged. We will see how the company handles this obvious error. January 15, 2015
Rated 5.0 out of 5.0 by Great quality plywood at a great price I use 1/4" plywood a lot for the bottoms of drawer boxes. This is top notch stuff. No voids, thick veneer and very flat. Unlike the inexpensive plywood, I don't need to line the drawer bottom with other materials. The veneer is suitable enough to be sanded and given a coating of shellac and wax. Highly recommended if the application requires the plywood to show. One face is considerably nicer than the other, but this is not advertised as A-1 grade. This has become my go-to plywood brand. Also it is sufficiently packaged to avoid any shipping damage. September 8, 2014
Rated 3.0 out of 5.0 by Vaneer very thin I have never tried getting a lumber product over the Internet before, and after getting this one, I doubt I'll try this experiment again. The vaneer is very thin. If you are not careful, when you are finish sanding it, you will wear right through it. The sheet is 3 plies; the ultra thin finish vaneer, a thin backing and a thicker center. I was not impressed with the quality. January 11, 2014
Rated 5.0 out of 5.0 by High quality...Great grain... Very nice, high quality furniture grade oak plywood... Nice color, great grain...Flat and straight...AAA+++ August 29, 2014
Rated 4.0 out of 5.0 by Attractive and useful Years ago I used red oak plywood to make a floor to ceiling bookcase with very satisfactory results, but I seldom use plywood for making furniture. This panel is being used for its structural properties: plywood is much less prone to warping than solid wood, especially when humidity changes. However I couldn't help but notice the beautiful grain pattern. The veneer is applies in 4 inch strips, so the end result looks as though you glued together solid planks to make the board. If my wife notices it, I can see myself making a lot of furniture! April 12, 2015
Rated 5.0 out of 5.0 by Nice piece of wood The 2x4 piece of white oak plywood was very nice. It was a little costly, but when you need something what are you going to do.Of course stores know this.The wood was nicely finished, but had a slight bow in it. Not enough to cause a problem with my project. But thats what happens when you can't pick out your wood in the store.They don't sell white oak anything. Actually I bought several hundreds of dollars of white oak moldings and had them shipped from Ohio because there is no availability here in South Florida. March 25, 2015
Rated 4.0 out of 5.0 by Great Looking This plywood has a great weight and a nice look. We've used this plywood as a sturdy piece of our workbench. I am looking forward to the many years of use that this plywood will get as a part of our workbench. A great, sturdy, dependable addition to any project. March 22, 2015
Rated 4.0 out of 5.0 by High quality plywood - damaged in shipping This is really nice plywood. Thick veneers with good figure (rare for big box store plywood), great core and no voids that I have come across. Unfortunately it was badly damaged during shipping. There were some big gouges in the sides, the edges were crushed, and it was scratched through the veneer in spots. I had plans to line a box with this, but had to use it for shop jigs/templates instead. Kind of a waste but as I mentioned this is really high quality plywood. If my local Home Depot stocked this, I would buy it all the time. I'm not going to take a chance on shipping again though. Pros: November 6, 2013
  • 2015-04-26T11:01:37.753-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co-hasreviews, tv_21, tr_21
  • loc_en_US, sid_204311233, prod, sort_default
2 >>


Standard Shipping includes delivery by small parcel service. Orders for this item may be expedited for an additional fee.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.