Rated 4.1 out of 5 by 40
Rated 3.0 out of 5.0 by Nanci Not the best of it's kind.
I used this for rolling an epoxy roofing material. The material was too heavy and the cover kept slipping out of the holder frame. Another negative is the fact that it is only usable with the enclosed end caps. Needless to say the caps are sealed onto the roller cover now and the frame does me no good now. This might work for light weight painting but until they figure something out with the caps I'll continue to use the replacement I purchased from the other box store. If you purchase this item make sure you hold on to the end caps for future use. One of the previous reviewers had mentioned this same issue.
July 5, 2016
Rated 5.0 out of 5.0 by Brian 18 inches of coverage
For a sealer or paint for flooring it is a great option. Sealed 3,000 sqft flooring in a shop.
July 19, 2016
Rated 3.0 out of 5.0 by rick Yoke Roller
Screws loosen up constantly!
Screws loosen up constantly!
June 29, 2016
Rated 5.0 out of 5.0 by Springer Superior to the cam lock model
I bought the other brand at first. The other cam action lock came loose in no time so I bought this one. You set it once and it did not come loose until I wanted it too! Old School construction that works. It even comes with adapters for rollers without inserts. I have more roof to coat and I know this will do the job well.
May 27, 2016
Rated 4.0 out of 5.0 by MisterRobert3 18" Paint Roller
Product Worked As Expected. Was Able To Paint 24x24 Garage Floor In 30 Minutes.
Was Also Able To Paint 20x20 Shed Floor in 25 Minutes.
May 10, 2016
Rated 5.0 out of 5.0 by Omar Getting the job done in half the time
I had to paint s huge wall and this saved a lot of time. Construction is solid and great product
April 19, 2016
Rated 5.0 out of 5.0 by Brigiitteprojects Yoke roller frame
Very good roller! Best I've ever used! Did great job! I would recommend to others
February 16, 2016
Rated 4.0 out of 5.0 by Fairportdiy Quality roller frame but the pins don't fit standard roller end cups
I used this frame to spread three coats of epoxy floor coatings. It worked perfectly. The one complaint I have is that it has non-standard pins that are too large for the end cups that are provided with 18 in roller covers. The roller comes with two cups that used in place of the ones that come with new roller covers. This means that you have to clean these cups when you finish painting and you must never lose them or you will have to purchase another roller frame. If you are using a solvent based paint you probably will just throw the roller cover away when finished but you must remember to remove and clean the end cups with a solvent soaked rag. This frame needs to be redesigned to use standard size pins that fit the roller covers that are available at Home Depot and other paint suppliers.
December 22, 2015