Project Panels Red Oak Plywood (Price Varies by Size)-2014 at The Home Depot
Free shipping

Project Panels

Model # 2014

Internet # 204311230

Red Oak Plywood (Price Varies by Size)

Project Panels Red Oak Plywood (Price Varies by Size)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$19.99 / each
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


In Stock



Model # 2014

Internet # 204311230

PureBond plywood project panels are a convenient and cost-effective way to build cabinets, furniture and other woodworking projects. Made in the USA with sustainably-harvested American hardwoods, they provide a beautiful wood veneer face bonded to a strong and flat wood core. These PureBond project panels are made with no added formaldehyde, eliminating the concern about off-gassing dangerous fumes during fabrication or when installed in your home. Their smaller size makes them easy to handle and allows you to order just the amount of wood you need. PureBond plywood, in project panel sizes or in full sheet sizes, are a Home Depot exclusive.

California residents: seeProposition 65 information

  • Made in the USA
  • Decorative red oak veneer applied to both sides of this panel
  • B-2 rotary cut red oak - 7 ply construction
  • Light weight, all-wood veneer construction
  • Precision-cut hardwood plywood panels in convenient small sizes
  • DIY Pet Food Container Instruction Manual
    DIY No Sew Lap Desk Instruction Manual DIY Key Holder Instruction Manual
    DIY Upholstered Footstool Instruction Manual DIY Wall Pocket Instruction Manual
    DIY Serving Tray Instruction Manual DIY Bench Instruction Manual
    DIY Candle Holder Instruction Manual DIY End Table Instruction Manual
    DIY Wall Cabinet Instruction Manual DIY Large Desk Instruction Manual

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Actual product thickness (in.)  .703  Actual product width (in.)  24 
Assembled Depth (in.)  48 in  Assembled Height (in.)  .703 in 
Assembled Width (in.)  24 in  Manufacturer Warranty  Product warranted against glue or bond failure. Product replacement provided. 
Plywood Type  Hardwood Plywood  Pressure Treated  No 
Product Length (ft.)  4 ft  Product Thickness (in.)  3/4 in 
Product Width (ft.)  2 ft  Returnable  90-Day 
Tounge and Groove  No 


Rated 4.9 out of 5 by 8 reviewers.
Rated 5 out of 5 by Just the right size you need for projects. Here's a product that comes in just the size you need without having to deal with full sheets, extra expense, and waste. It's easier to transport, and not too heavy. I received one of the 2x4 panels, Red Oak, in 3/4" thickness. The 3/4" ply was strong enough to be used as shelving and would work fine for any type of sturdy application. Be sure to use a fine plywood blade in the circular saw to get a nice fine cut, with very little splintering. Edges sanded fine. Veneer is a good thickness. I did not have a chance to finish mine yet, but it appears that both sides of this sheet are ready for some stain and several coats of Varathane (or equivalent). Good quality grain. It handled screws with no issues so the quality of the laminates and layers were good (no pockets). Overall, it got the job done, and looks great to boot! February 8, 2014
Rated 5 out of 5 by Great Stuff... Great...No warps...flat and strairht grade... July 22, 2014
Rated 5 out of 5 by Great bookshelves I got these thicker pieces to make some bookshelves in my computer room because I needed a custom made built in, instead of a standard sized bookcase which I had no room for. I liked the fact that the red oak matched my desk and the shelves were installed in a cut out to the right of where I sit, making it convenient. The wood was easy to work with, having to just make a single cut with the circular saw. It was easy to sand, looked great and I only had to apply a light coat of red oak stain and Varithane to make it match my desk. Now I have the shelves FULL of much needed books and don't have to worry if its strong enough. Definitely suited my needs in a pinch. Nice plywood for projects too. I will order more for some outdoor projects next spring. November 4, 2013
Rated 4 out of 5 by I made a cabinet with this and it was good. My experience with this was very similar to my experience with their white oak plywood. Also, even though the only red oak is in the veneer, it still smelled like cat urine (red oak) when I made my cuts. Just can't escape that red oak smell! This plywood fulfills what I want in plywood; flat, pretty, strong. This was for a piece 3/4" thick, with 5 core plys and a thin veneer of white oak on both sides. The 'A' face was not as smooth as the '1' face (primary face was not as smooth as the back), but had a consistent appearance and texture. A light sanding gave me the finish I was looking for. For only having 5 core plys, this plywood was able to hold screws really well. Out of 100 screws I only had two that managed to strip out. Another thing to be mindful of if your project will show the edge: knots have not been removed from the core plys so you will see what looks like a large black void from a distance, but will actually just be a knot upon closer inspection. January 31, 2014
Rated 5 out of 5 by Very Good Quality Oak I ordered these to use as risers for a staircase that I rebuilt over the existing one. They worked perfectly and matched the oak stair treads that I also purchased at HD. I ordered 5 boards and there was not a defect on any of them. The quality was very good and it ended up saving me quite a bit of money by cutting these boards myself (3 risers in each board) vs. buying the risers at $18-20 each. the cost was very reasonable although you do have to pay a special shipping charge. I would highly recommend. January 28, 2014
2 >>


Standard Shipping includes delivery by small parcel service. Orders for this item may be expedited for an additional fee.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.