0010306105699

QEP

Model 10569Q

Internet #202205611

Store SKU #112547

1-3/8 in. Hole Saw with Water Delivering System

$20.68 /each

Frequently Bought Together

Product Overview

The Brutus 1-3/8 in. Tile Hole Saw is a good choice for faucet, pipe and shower head installations. This hole saw features a durable diamond grit edge, for faster cuts, less dust and less chipping. Use when installing bathroom fixtures on marble, granite, ceramic and porcelain tiles.

  • Fits 1/2 in. and 3/8 in. drill chucks
  • For cutting through the hardest porcelain, ceramic, marble and granite
  • Metal saw with diamond grit edge cuts most holes in less than 30 seconds
  • Drill guide holds hole saw in place during cutting
  • Includes water cooling guide cup to keep the hole saw cool for a longer life
  • Additional mounting tape available as model number 10570 (sold separately)
  • Note: Product may vary by store
  • Note: Product may vary by store.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

10 Questions26 Answers

Customer Questions & Answers

1-3/8 in. Hole Saw with Water Delivering System
1-3/8 in. Hole Saw with Water Delivering System

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
9 answers

can i use this saw to cut thru limestone 2in. thick

This question is from 1-3/8 in. Hole Saw with Water Delivering System
Asked by
janesville wi
Read all my Q&A
February 4, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Read all my Q&A
October 1, 2015
Answer: 
No. It only drills through 1"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pennsylvania
Read all my Q&A
June 2, 2015
Answer: 
Two inches is a pretty deep cut for this tool, but it will probably cut the limestone. You may need to rinse out the coolant, several times, to clear the collected "mud". I doubt the double sided gaskets will adhere to porous limestone very well, but you might be able to "glue" the cup to the limestone with another adhesive (sliicon, maybe?), or block in place with clamped-on wood stock, or some such. Be Read More
Two inches is a pretty deep cut for this tool, but it will probably cut the limestone. You may need to rinse out the coolant, several times, to clear the collected "mud". I doubt the double sided gaskets will adhere to porous limestone very well, but you might be able to "glue" the cup to the limestone with another adhesive (sliicon, maybe?), or block in place with clamped-on wood stock, or some such. Be very careful using corded tools in the vicinity of water, too.
The biggest concern may be the depth of the tool. You may need to chip off the "plug" of rock that's left by the cutter so it doesn't cause the tool to bottom out before breaking through. A small chisel should do the trick. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
Home Improvement Profile: Professional
February 22, 2015
Answer: 
I know that it will cut limestone but the saw I have has a depth of 1 1/4". If you could cut from both sides it would work.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pawleys Island, SC
Read all my Q&A
October 29, 2014
Answer: 
I don't think so - the cutting head is only about 1 1/2 inches deep
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Perrysburg, Ohio
Read all my Q&A
September 23, 2014
Answer: 
It would be tricky to cut through 2" of limestone. The saw is certainly up to the challenge and would make quick work of the cut but the throat depth is only 1-1/4" so you would either have to go at it from both sides or break the plug midway through the cut and continue. It's a relatively short tool so again, I think it is doable but tricky.
I hope this helps.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Cave Creek, AZ
Read all my Q&A
September 16, 2014
Answer: 
No.
Coring bits only cut a hole as deep as their well allows. This well is only 1 1/4 deep. If you get a bit with a center drill, you can drill from both sides.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Vineland, NJ
Read all my Q&A
June 17, 2014
Answer: 
no - the depth of the cut for this hole saw is only about 1-1/2 inch
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Ozark, AL
Read all my Q&A
March 25, 2014
Answer: 
It would be difficult to use this on anything 2" think, as your well is only so deep. It may work as long as you keep it wet and take it slow.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Atlanta, GA
Read all my Q&A
February 13, 2014
Answer: 
Hi Bird,
Thanks for your question and interest in this item. More information is needed to accurately answer your question. Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item. Our hours of operation are between 6:00 a.m. and 2:00 a.m. Eastern Time daily.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
 
5 answers

can i use this to drill a hole on a glass?

This question is from 1-3/8 in. Hole Saw with Water Delivering System
Asked by
Read all my Q&A
July 5, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Washington
Read all my Q&A
Home Improvement Profile: DIYer
February 3, 2016
Answer: 
You need to go slow if you drill glass, and keep the water in the delivery device. You know you have enough when an opaque slurry forms. Gently lift the drill bit enough to allow the water into the groove. You will burn the bit and damage the 'diamond' coating if allowed to run dry.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Delray Bch. FL.
Read all my Q&A
October 1, 2015
Answer: 
It does not work on Plank Tile. It is electroplated which always gives a rough finish and will chip the glass.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
hamburg ,new york
Read all my Q&A
Home Improvement Profile: DIYer
July 6, 2015
Answer: 
i don't think so
-1point
1out of 3found this answer helpful.
Was this helpful?helpful1unhelpful2

Asked by
Pennsylvania
Read all my Q&A
July 6, 2015
Answer: 
I don't think this is the tool for drilling in glass. It might work in non-tempered glass, like a window pane, but I think you need to press pretty hard to make it cut, which would crack the glass. It would probably shattered tempered glass, like a table top. I think you want a different tool for glass.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
July 6, 2015
Answer: 
Thank you for your inquiry.
Our Hole Saw with water delivery is for use when installing bathroom fixtures on marble, granite, ceramic and porcelain tiles. Our product has not been tested on glass so cannot be recommended.
If you have any further questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Is this item a good choice for 18 gauge stainless steel. I need two more holes in a a stainless steel kitchen sink.

This question is from 1-3/8 in. Hole Saw with Water Delivering System
Asked by
San Diego
Read all my Q&A
March 7, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Delray Bch. FL.
Read all my Q&A
October 1, 2015
Answer: 
No you need a Bi-Metal holw saw
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pennsylvania
Read all my Q&A
June 2, 2015
Answer: 
This is not designed to cut stainless steel. You need a bi-metal hole saw. You'll find these in the tool department at Home Depot. Milwaukee is a great supplier, but there are others.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
March 9, 2015
Answer: 
Thank you for your inquiry.
Our hole saw with water delivery system is for use with marble, granite, ceramic and porcelain tiles.
If you have any further questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Can this cut through an enameled basin?

This question is from 1-3/8 in. Hole Saw with Water Delivering System
Asked by
Read all my Q&A
April 28, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 2, 2016
Answer: 
Thank you for your inquiry.
Our 1-3/8" Hole Saw can cut through porcelain basins. Water must be used with the tool to keep it cool.
If you have any further questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 29, 2016
Answer: 
With this product you can cut through porcelain, ceramic, marble, and granite.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T11:59:25.332-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202205611, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 109 reviewers.
Rated 5.0 out of 5.0 by Great Product I purchased a one hole porcelain sink from Ikea but really wanted a faucet with hot and cold knobs, therefor I needed a 3 hole pattern sink. Ikea btw does not sell 3 hole bathroom sinks... Anyway, this hole saw was AWESOME! one of the best HD purchases in a long time. I rarely review items, but this deserved a shout out... Great Product! August 5, 2016
Rated 5.0 out of 5.0 by This worked perfectly I made six cuts it was just ceramic tile but no sign ow wear on the saw bit. I wish I had used this on the previous bathroom that I tiled. July 26, 2016
Rated 5.0 out of 5.0 by Works well Was worried the bit wouldn't last but I've cut three holes with it and it seems to be holding up just fine. Worth $27 if you are doing a bathroom August 16, 2016
Rated 5.0 out of 5.0 by It did the hole job - perfectly! I was a bit concerned about drilling a hole in a large expanse of granite for a new Insinkerator hot water dispenser - I had drilled tile before, but nothing as thick and expensive as my countertop. The guide and reservoir made this much easier than starting and drilling the hole in tile. It worked like a dream - the "hole" process went smoothly and quickly - highly recommend this product! August 9, 2016
Rated 5.0 out of 5.0 by Great Tool Works really good, very easy to use. The best way to cut neat holes in tile. June 28, 2016
Rated 5.0 out of 5.0 by Easier than I thought I didn't think cutting a hole in granite would be so easy. Love this product. June 14, 2016
Rated 5.0 out of 5.0 by Great tool After reading some negative reviews I thought maybe this tool wouldn't work. I was glad I didn't listen to all the haters. As long as you let the weight of you drill do the work you'll be fine. The reservoir held water and made my cut into porcelain very easy. May 22, 2016
Rated 5.0 out of 5.0 by Diamond Hole Saw for Faucet Cut thru porcelain tile like it was card board. Well designed and easy to use. May 10, 2016
  • 2016-08-21 T14:18:31.306-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_109, tr_109
  • loc_en_US, sid_202205611, prod, sort_default
2 3 4 5 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • REVIEWS, PRODUCT