0010306600897
Discontinued

QEP

Model 60089Q

Internet #202061498

Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile

This item has been discontinued.
The Home Depot no longer carries this specific product.

  • Built in splash guard
  • Easy to clean and maintain
  • Great for wet cutting and larger, ceramic tiles

Frequently Bought Together

Product Overview

The QEP Master Cut 3/5 HP Wet Tile Saw features a 3/5 HP direct-drive motor and 7 inch diamond blade that makes it perfect for cutting ceramic tiles. The saw's compact size is great for working in tight places and small jobs, while the open table design provides the versatility to cut larger tiles. The tilt-up cutting table helps you make precise 15-, 30- and 45-degree miter cuts.

California residents: see   Proposition 65 information

  • 3/5 HP, 120-volt direct-drive motor
  • Automatic thermal overload protection prevents the motor from overheating
  • Steel deck provides a durable work surface
  • 7 in., continuous-rim diamond blade
  • Splash guard keeps dust, debris and water spray to a minimum
  • Adjustable rip/angle guide for accurate production cuts
  • Blade-cooling water reservoir allows for wet cutting
  • Water reservoir is removable for easy cleaning
  • Tilt-up cutting table for precision 15-, 30- and 45-degree miter cuts
  • Open table design accommodates larger tile sizes
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

38 Questions107 Answers

Customer Questions & Answers

Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile
Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
9 answers

Can this cut glass tiles?

This question is from Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile
Asked by
MetalMom
October 11, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Read all my Q&A
June 4, 2013
Answer: 
I cut glass tiles with it and didn't notice any difference between glass and ceramic. You need to have large tiles to cut however. I don't recommend you use it for the 1 x 1 inch squares as there's no way to hold them steady while cutting. For those, try putting the tiles in a bath of water (using a cookie sheet for the water and cutting with a dremel tool while holding the tile with adjustable pliers.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Buckeye, AZ, USA
Read all my Q&A
May 23, 2013
Answer: 
Yes! We used this saw very successfully to cut 1" glass mosaic tile -- it cut both natural stone and glass tiles for us, without the need for a different blade.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

April 25, 2013
Answer: 
With a special blade, it should. I tried to cut glass mosaic tile with the blade it came with it and it did not come out well. I recommend scoring and snapping glass tile anyway.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
April 23, 2013
Answer: 
Yes, take your time and wear at least two pairs of latex gloves when you are doing it because the glass chips may try to go in your fingers.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Worcester, MA, USA
Read all my Q&A
February 23, 2013
Answer: 
yes very easily
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Chicago
Read all my Q&A
January 21, 2013
Answer: 
NO. If you try to cut glass tiles, they will chip.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Skaneateles, NY
Read all my Q&A
January 15, 2013
Answer: 
Yes. I used it for 80 sq ft of glass backsplash tile and it works great...especially with a new blade.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
November 13, 2012
Answer: 
No it cannot cut glass tile
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
October 12, 2012
Answer: 
Metal Mom-
The Master Cut 3/5 HP Direct-Drive Motor Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile can ONLY cut glass tile if the blade is switched. The blade to use for cutting glass tile is the QEP 7 in. Glass Tile Diamond Blade for Wet Tile Saws 6-7006GL. I have attached it here for you. I hope this helps, should you have any further questions please contact our QEP Customer Service at (866) Read More
Metal Mom-
The Master Cut 3/5 HP Direct-Drive Motor Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile can ONLY cut glass tile if the blade is switched. The blade to use for cutting glass tile is the QEP 7 in. Glass Tile Diamond Blade for Wet Tile Saws 6-7006GL. I have attached it here for you. I hope this helps, should you have any further questions please contact our QEP Customer Service at (866) 435-8665. Thank you for choosing QEP! Read Less
+13points
13out of 13found this answer helpful.
Was this helpful?helpful13unhelpful0
 
9 answers

can i cut bricks

This question is from Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile
Asked by
userdon
las vegas nv.
September 19, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Mullan, IDaho 83846
Read all my Q&A
October 16, 2013
Answer: 
Yes
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
September 29, 2013
Answer: 
No that is not this saws intended use it is for tile
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
California
Read all my Q&A
June 4, 2013
Answer: 
I don't recommend this saw for cutting bricks. The blade is too small. I have cut bricks using a regular "skilsaw" equipped with a diamond tipped masonry blade. This is what I would recommend to use if you are not doing too big a job.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Denver, CO, USA
Read all my Q&A
May 21, 2013
Answer: 
no..only ceramic and porcelain tiles.I used it to cut both.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Worcester, MA, USA
Read all my Q&A
February 23, 2013
Answer: 
I guess you could but you would have to flip the brick for a clean cut and cut through both sides because the blade wont cut throught 3 inches
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Roswell, GA, USA
Read all my Q&A
February 12, 2013
Answer: 
It could only cut a slit in a brick. I would not use this saw for a cutting depth over about 1/2".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Chicago
Read all my Q&A
December 13, 2012
Answer: 
While it might be possible, bricks are a little softer than tile, the blade probably would not cut all the way thru the brick. A seven inch blade only has about 1 1/2" of cutting height from the surface of the saw table. Bricks are usually thicker than that and would require two passes of the blade.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
lowden iowa
Read all my Q&A
October 3, 2012
Answer: 
No, we had landscape walls installed....cut blocks/brick with commercial wet saw.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
September 20, 2012
Answer: 
Userdon,
The Master Cut 3/5 HP Direct-Drive Motor Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile is not designed to cut bricks because of the depth of the blade used with this wet tile saw as well as the thickness of a normal brick. I hope this helps, thank you for choosing QEP! Should you have any further questions please feel free to contact our QEP Customer Service at (866) 435-8665.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
8 answers

Can it cut 20x20 inch tile?

This question is from Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile
Asked by
bingxuesun
July 10, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
Houston, TX
Read all my Q&A
June 10, 2015
Answer: 
Yes. As long as you can help guide it, I think it would cut through any length...
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
North NJ
Read all my Q&A
March 4, 2015
Answer: 
the platform itself is only about 12-14" wide... you would have to remove the blade guard and free hand guide the cut... i wouldn't recommend it but anything is doable...
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
San Antonio, TX, USA
Read all my Q&A
October 30, 2013
Answer: 
Yes it can. Use new blade and no problems. Although your ability to cut straight lines is totally yours.
The more you use the machine the better the outcome.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Mullan, IDaho 83846
Read all my Q&A
October 16, 2013
Answer: 
Yes
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
September 29, 2013
Answer: 
20" tile would be the very max it could cut. I dont think I would want to do thin cuts on tile that big for 2 reasons the motor is not the fastest turning so if you were to bind it in your cut it might snap. The other is the size of the table agan when doing fine cuts with the tile not fully supported you might shap you piece. I think it is rated for tile up to 16"
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Mississippi, USA
Read all my Q&A
September 21, 2013
Answer: 
I cut one 20x20, and it is extremely awkward and difficult. The surface area isn't really large enough, and the saw starts hanging up halfway through. I actually had to do half the tile, then flip it over and do the other half from the opposite side. Personally, I wouldn't use it for anything larger than 12x12.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
atascadero ca.
Read all my Q&A
August 13, 2013
Answer: 
without question: however, you'll likely have to cobble together an auxiliary (table height) table, and I would NOT trust the fence to net a square cut without verifying it first with a square......
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
July 10, 2013
Answer: 
Thank you for your inquiry.
Our Master Cut 7" Portable Tile Saw will cut an unlimited size of tile. You will find that with a larger size tile that the tile overhangs the sides of the table.
If you have any further questions you can call our Customer Service (866) 435-8665.
Thank you for your interest in our QEP product.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
 
7 answers

will this saw cut marble window sills ??

This question is from Master Cut 3/5 HP Wet Tile Saw with 7 in. Diamond Blade for Ceramic Tile
Asked by
stopwatch
tampa florida
April 3, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Read all my Q&A
September 29, 2013
Answer: 
I would not use this saw to cut anything thicker than ceramic tile again 3/4 hp is only so much power and it only turns so fast. If you are cutting 1/2 to 3/4 marble you should use something with more power and speed
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
August 13, 2013
Answer: 
sure with the proper blade....
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
June 4, 2013
Answer: 
It may, depending on the thickness of the marble. I cut glass tile with it and it's only supposed to be a ceramic tile saw. All I can say is to try a sample.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
T.O, CA, USA
Read all my Q&A
May 30, 2013
Answer: 
1/4" thick Marble should take 3 minutes/ foot of cut. 1/2" thick may take 7 minutes per foot.
Thicker than that may be difficult to not stall the saw. You would need more powerful motor. Also make sure the water reservoir is sufficient.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Mesquite, TX, USA
Read all my Q&A
April 4, 2013
Answer: 
quite possible if 3/4" or less thick and the proper cutting blade
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Chicago
Read all my Q&A
April 4, 2013
Answer: 
I have used it to cut granite---since marble is slightly softer, it should work. Move the piece slowly to avoid chipping. Try it on a scrap piece of the material, if possible to get a feel for what the machine will do.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Worcester, MA, USA
Read all my Q&A
April 3, 2013
Answer: 
If your asking about cutting marble, yes it will but be sure the blade is new and lots of H2o during the process.-OMK Flooring
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-08-27 T16:11:18.055-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202061498, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 111ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 276 reviewers.
Rated 4.0 out of 5.0 by Great saw for the money! Pretty straight forward right out of the box, some assembly required as they say. A tad difficult for small single pieces cuts (back splash work) but workable. Water containment was nice, didn't make too big of a mess, could've been user error. Again following the instructions is important. August 9, 2016
Rated 5.0 out of 5.0 by Great Little Wet Tile Saw! Simple assembly, good quality , perfect for the small jobs I am doing- kitchen backsplashes, small bathroom jobs, etc. Why spend hundreds for a wet saw when this will do. Cheaper to buyy this than to rent a saw also! July 19, 2016
Rated 4.0 out of 5.0 by Great DIY saw Fairly easy to set-up, and easy to use. At first it was a bit scary, water splashing everywhere, but it calms down after a few rotations. I would love to give it five stars, but it can only cut 4-6 inches before you have to remove the tile and flip it around to complete the cut. July 12, 2016
Rated 5.0 out of 5.0 by Wet saw Love LOVE, LOVE, my wet saw! Works great for my moasic tile! So glad it comes with a blade just perfect formy glass tile! Thanks again Home Depot!! July 21, 2016
Rated 4.0 out of 5.0 by Saw Good product for the price I would strongly recommend this product July 12, 2016
Rated 1.0 out of 5.0 by disapointed It doesn't suck up the water like it is supposed to :( July 9, 2016
Rated 4.0 out of 5.0 by Excellent homeowner saw! This is my second wet saw. Purchased a similar one some time ago but lost parts to it when moving. purchased this saw to do tile in my home. For a homeowner this us an excellent saw. Cuts throught ceramic tile easily. Even cuts through porcelain tile but upgrade the blade first. Very straight cuts! Can't beat it! Very good saw! June 19, 2016
Rated 3.0 out of 5.0 by Best value you'll ever get out of $69... I bought this saw to do my bath installation surround and it definitely paid for itself. Makes smooth straight cuts, on the value I would give it 5 stars but as for quality maybe 1 1/2 the fence is chintzy be careful to line the top and bottom marks or you'll be cutting triangles. I had to mark the table with an awl to be able to see the marks, The water tray is difficult to remove without making a mess, plenty of towels and plastic at the cutting area to avoid aggravation but for a single-job tool this was "da bomb" Think China Freight vs. Snap-Off May 10, 2016
  • 2016-08-26 T15:13:45.907-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_276, tr_276
  • loc_en_US, sid_202061498, prod, sort_default
2 3 4 5  ... 10 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • REVIEWS, PRODUCT