Rated 3.7 out of 5 by 39
Rated 5.0 out of 5.0 by Storrs Forgot to mention during earlier review. Those who had problem with blade removal, probably made honest mistake of attempting to remove screws clockwise. They are to be removed by turning counter clockwise! Fairly easy with power screw driver.
October 28, 2016
Rated 5.0 out of 5.0 by Storrs Grout saw works real well. Put it to use on a 200 sq ft area and found the results to be excellent.
October 27, 2016
Rated 5.0 out of 5.0 by MrPlumber Grout Remover
I haven't use the item as yet but. It seems to be of good quality.
October 18, 2016
Rated 5.0 out of 5.0 by Primrose Great grout brush
Brush is sturdy and easy to hold and has very stiff bristles. Am stripping a large slate floor of decades of wax buildup and varnish and the brush has made easy work of the grout. I even use it on the slate to clean out all the crevices.
October 11, 2016
Rated 4.0 out of 5.0 by Robert Grout Saw
nice feel, fits in your hand nicely.
nice grip for extended time usage
September 15, 2016
Rated 1.0 out of 5.0 by Zippel Screws Difficult to remove
Since the grout gaps were narrow, I needed to remove one of the blades. After reading about the difficulty some customers were having with the screw heads stripping, I applied WD-40 liberally and then gently tapped the screw head with a hammer. After much effort, the first screw finally loosened. The second screw head then stripped out and I had to return the product to Home Depot. The tool uses machine screws into aircraft type locking nuts. The quality of the screws is inferior to the quality of the locking nuts. Don't bother buying this tool unless you have wide enough gaps to use two blades and don't expect to replace the blades.
June 29, 2016
Rated 1.0 out of 5.0 by rkny defective product
The screws are impossible to remove. They end up getting stripped if you use force. Returned to the store.
July 6, 2016
Rated 1.0 out of 5.0 by DidItMyself Stripped Screw and Overtightened Screw
First one I bought had stripped screw heads. Exchanged and second one was way over tightened and unremovable even with my extra long phillips screwdriver.
July 16, 2016