Model # R150FSE

Internet #203906297

Store SKU #1000010407

RIDGID 1-1/2 in. 18-Gauge Finish Stapler
0648846063652

RIDGID

1-1/2 in. 18-Gauge Finish Stapler

  • Powerful motor able to drive 1-1/2 in. staples into solid oak
  • Dry-fire lockout helps motor life and stops marring work surface
  • ACCU-drive tip design allows for accurate placement of fasteners
$99.00 /each

Frequently Bought Together

Product Overview

The RIDGID 1-1/2 in. Pneumatic Finish Stapler features an industry leading feature set with Fasten Edge Technology. It has a selectable trigger that can be set to contact or sequential fire. The magazine allows a wide range of fastener diameters and the internal piston catch delivers consistent driving power. It is designed for clean operation and long life and equipped with no-mar pads that help prevent scuffing or damage to the work surface.

California residents: see   Proposition 65 information

  • Powerful motor able to drive 1-1/2 in. staples into solid oak
  • Oil-less motor eliminates daily oiling and oil splattering on the work surface
  • Dry-fire lockout extends motor life and prevents marring work surface
  • Hex grip enhanced micro-texture for secure grip and maximum user comfort
  • Bottom load magazine allows for quick and easy staple loading
  • ACCU-drive tip design allows for accurate placement of fasteners at the desired angle
  • No-mar pad keeps work surface clean of tool marks
  • Adjustable rear exhaust with muffler puts the exhaust where you want it without any tools
  • Need help? CLICK HERE to view our Nail Gun Buying Guide
  • Click Here to Register Your Product

    Test Item

  • Click here for more information on Electronic Recycling Programs

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

20 Questions26 Answers

Customer Questions & Answers

18-Gauge 1-1/2 in. Finish Stapler
18-Gauge 1-1/2 in. Finish Stapler

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 18-Gauge 1-1/2 in. Finish Stapler
 
3 answers

Is this a good product to use for upholstery?

This question is from 18-Gauge 1-1/2 in. Finish Stapler
Asked by
Read all my Q&A
August 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Lakewood CO
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2016
Answer: 
My opinion is that this would be exactly what you need for upholstery, altho I do not do upholstery
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 30, 2016
Answer: 
Hi Dj. The following jobs are recommended for this tool: finish and trim (interior and exterior), floor underlayment, cabinet work, casebacks, furniture, light trim moldings, fascia and soffit, drawers, staircases, carpet installation, mirror and picture frames and crafts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Northern Utah
Read all my Q&A
Home Improvement Profile: DIYer
August 26, 2016
Answer: 
Not really. I use a 20 Guage stapler for upholstery. Something about the size of a T-50 staple is perfect.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 18-Gauge 1-1/2 in. Finish Stapler
 
2 answers

Would this gun be a good choice for wood and cement fiber siding or tempered peg board?

This question is from 18-Gauge 1-1/2 in. Finish Stapler
Asked by
Read all my Q&A
February 9, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lakewood CO
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2016
Answer: 
Maybe for tempered peg board if the load is not too great; I personally would not use it on any concrete board, I would use the recommended screws or ring-shank nails
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
February 15, 2016
Answer: 
Thank you for your interest in RIDGID.
The nail gun is good for use on wood and trim, see application guide below. There is no usage recommendation concerning its use specifically on fiber cement siding, or tempered or board.
APPLICATIONS
You may use this tool for the purposes listed below:
Finish and Trim (Interior and Exterior)
Floor Underlayment
Cabinet Work
Casebacks
Furniture
Light Trim
Read More
Thank you for your interest in RIDGID.
The nail gun is good for use on wood and trim, see application guide below. There is no usage recommendation concerning its use specifically on fiber cement siding, or tempered or board.
APPLICATIONS
You may use this tool for the purposes listed below:
Finish and Trim (Interior and Exterior)
Floor Underlayment
Cabinet Work
Casebacks
Furniture
Light Trim Moldings
Fascia and Soffits
Drawers
Staircases
Carpet installation
Mirror and Picture Frames
Crafts
Lattice
Regards,
RIDGID
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 18-Gauge 1-1/2 in. Finish Stapler
 
2 answers

Can i use this nail gun for cedar fencing?

This question is from 18-Gauge 1-1/2 in. Finish Stapler
Asked by
Read all my Q&A
January 21, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

January 30, 2016
Answer: 
Yes, this product will work for cedar fencing.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
January 29, 2016
Answer: 
Hi! Here is the list of recommended applications for the R150SFE:
APPLICATIONS
You may use this tool for the purposes listed below:
Finish and Trim (Interior and Exterior)
Floor Underlayment
Cabinet Work
Casebacks
Furniture
Light Trim Moldings
Fascia and Soffits
Drawers
Staircases
Carpet installation
Mirror and Picture Frames
Crafts
Lattice
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from 18-Gauge 1-1/2 in. Finish Stapler
 
2 answers

Can u use brads in this model

This question is from 18-Gauge 1-1/2 in. Finish Stapler
Asked by
Read all my Q&A
November 18, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
November 23, 2015
Answer: 
Thank you for your interest in RIDGID.
No, the R150FSE is a stapler, it uses 18 gauge staples and is not designed to accept and use brad nails.
Regards,
RIDGID
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Michigan
Read all my Q&A
Home Improvement Profile: DIYer
November 20, 2015
Answer: 
No. Only staples.
But I have their brad nailer too, and it's equally well made and user-friendly. Used it last night and each day of the last 3 days.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 »
  • 2016-10-30 T23:07:37.873-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203906297, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 53 reviewers.
Rated 4.0 out of 5.0 by Good Product Occasionally skips a staple - I just pull back the loader and shut it again and it then works well - maybe needs a break-in period? I have almost exclusively Ridgid tools as I find their overall value and quality as exceptional, and I like their lifetime guarantee. October 18, 2016
Rated 5.0 out of 5.0 by Happy stapler This is my second unit not because the other is broke or worn out but because my wife and I work together and a happy wife is a happy life September 27, 2016
Rated 4.0 out of 5.0 by Lightweight, easy to use I like the choices available for staple size. The power setting is easy to adjust for driving depth and all the other controls are placed for easy access. The weight makes it easy to use for all day work and the lifetime guarantee is a real plus. While it is priced a little more than other finish staplers, it is still priced to make it a real value. September 6, 2016
Rated 5.0 out of 5.0 by This saves a lot of time. I plugged in the stapler and used it right off. This product really saves tine compared to nailing the old way or screw. September 6, 2016
Rated 5.0 out of 5.0 by Perfect! Very satisfied Great addition to my tools. Very happy with performance. August 23, 2016
Rated 4.0 out of 5.0 by ridgid 18-guage finish staler Bought the stapler to put up 360 feet of chicken wire for an encousure. Shot almost 4,000 staples without a single problem. Pros light weight, easy to use no oil needed, two different firing modes. Cons soft case all the other pnematic staplers I looked at had hard cases, the rubber none maring tip get pulled off sometimes, 3 times so far, sometimes shorter staples dont seat all the way in the slot and need to be pushed all the way in. July 11, 2016
Rated 4.0 out of 5.0 by Does what I need it to do Stapler works great, sometimes jams when the staples are low. July 28, 2016
Rated 5.0 out of 5.0 by Rigid Stapler Product was inexpensive and fit the needs for the project I had planned. It worked fine and I am completely satisfied with the product. May 4, 2016
  • 2016-10-30 T21:20:04.272-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_53, tr_53
  • loc_en_US, sid_203906297, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT