RIDGID 1/2 in. Diamond Drill Bit-RD-71104 at The Home Depot
Free shipping
Discontinued

RIDGID

Model # RD-71104

Internet # 202528417

Store SKU # 769031

1/2 in. Diamond Drill Bit


RIDGID 1/2 in. Diamond Drill Bit
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

Item cannot be shipped to the following state(s): AK,HI
Loading...

PRODUCT OVERVIEW

Model # RD-71104

Internet # 202528417

Store SKU # 769031

This RIDGID 1/2 in. Diamond Drill Bit is used for fast, smooth cutting in all grades of ceramic tile, porcelain, granite, marble, slate, stone and glass. A patented diamond cutting edge provides easy-start drilling and long life. Innovative reverse spiral delivers water lubrication to the diamonds for increased cutting speed and to prolong life. Core ejection slot allows fast, easy material removal and continuous, uninterrupted drilling.

  • Core ejection slot for fast and easy material plug removal
  • Diamond-sintered cutting edge
  • The tri-flat shank helps prevent bit spin-out in the drill chuck.
  • Reverse-thread spiral helps to provide continuous water lubrication
  • CLICK HERE TO REGISTER YOUR RIDGID PRODUCT.

SPECIFICATIONS

Assembled Depth (in.)  .5 in  Assembled Height (in.)  2.25 in 
Assembled Width (in.)  .5 in  Bit Diameter  1/2 in 
Bit diameter (in.)  0.5  Color Family  Black 
Cordless/Corded  Both  Drill & Router Bit Type  Hammer, Percussion & Masonry Bits 
Drill Bit Type  Percussion Bit  Drill Bit Type(s) Included  Percussion Bit 
Drilling Depth (in)  1.125  Individual/Set  Individual 
Material  Other  Min Chuck Size Required  3/8 In. 
Power Tool Product Type  Power Tool Accessory  Product Depth (in.)  1.125 in 
Product Height (in.)  6.375 in  Product Weight (lb.)  .08 lb 
Product Width (in.)  2.25 in 

CUSTOMER REVIEWS

Rated 4.8 out of 5 by 5 reviewers.
Rated 5 out of 5 by How Easy can this be! My wife started a craft idea that needed holes drilled in glass bottles, I tried the regular carbide tipped bits and broke 9 out of 10 glass bottles. I was about to give up when doing research, I saw these, so I tried them... WHAT a difference, I can drill a hole in about 30 seconds and never break the bottle. It is so easy! Forget about those other specialty bits, these will save you time and money and drills a perfect hole every time. I just wish I had know the difference before running a dozen or so bottles. December 3, 2012
Rated 4 out of 5 by Great for what the home owner needs Went to install an RO system and had to drill through granite for the first time, reading about it online everybody recommended 100 dollar drill bits you have to buy from a contractor supply store online. Attempting to find something local I could use to install the system I had I ended up trying this Rigid bit; the directions and the experts and all the advice online suggests you practice before you do this on your counter and I could not agree more. I had some scrap granite samples, i'm sure porcelain tile would work too, which I practiced on and the torque from your drill as it contacts the granite can make the bit skip at the 45 degree approach. My wife would have been upset, to say the least, if the samples I practiced on were the end result of my drilling. After a few attempts I felt I was ready, also used a cheap spray bottle from Home Depot to keep the bit cool while drilling. This review took longer to write then it did for me to drill the hole, for a home owner who needs to drill maybe one or two holes in their granite countertop every ten years; can't go wrong with this. March 11, 2012
Rated 5 out of 5 by The perfect tool for the job! I bought a couple of very large clay pots for the patio and didn't realize until It was time to plant them that they didn't have drain holes! No problem I thought! I have drill bits for metal, they will make short work of this...... Um,. No... 5 minutes of hard and high speed drilling barely left a mark. I picked this drill bit up (5/8ths size I think) and oh my goodness, its the right tool for the job to say the least! It took about 20 seconds to core out a perfectly smooth drain hole. What a relief! I Fully recommend this for adding drain holes in pottery - I cant say how long the tool will last since I only used it for about 40 seconds between the two pots but I can say that it worked just as well in the second pot as it did for the first. July 22, 2014
Rated 5 out of 5 by I used the 3/4" version of this bit to drill a drain hole in an expensive hard ceramic pot I didn't want to risk breaking the pot by using a dull masonry bit and hammer drill, so based on the recommendations here I drove to Home Depot to buy the Ridgid diamond core bit. I've had many positive experiences with the brand. Using a cordless driller/driver and a stream of water, I was able to drill a very neat hold in the bottom of the pot in about one minute. Once the hole was started, the drill had a very sure, solid feel and I was confident that there was very little risk of breaking the pot. The bit cut through the hard ceramic like butter. Be sure to keep the bit wet during the drilling operation so that it doesn't overheat and burn the diamonds - The water also helps move the dust out. June 28, 2014
Rated 5 out of 5 by Perfection for drilling china! I am learning the art of Bonsai and cannot begin to afford Bonsai pots. So I picked up a few doable things at the thrift store, got this bit and drilled drain holes. Amazing how well it worked! Did need help drilling the "nitch" because my hands have been damaged, but after that, it was a breeze! Was shocked at the price, but worth it now and will have it forever! September 18, 2013
1-5 of 5

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.