Model # CP10P

Internet #100606322

Store SKU #679549

RIDGID 10 in. Diamond-Edge Tile Circular Saw Blade
0850650001090

RIDGID

10 in. Diamond-Edge Tile Circular Saw Blade

Frequently Bought Together

Product Overview

The RIDGID 10 in. Diamond-Edge Tile Circular Saw Blade has an ultra-thin alloy steel core that provides smooth cutting with minimum vibration. It is engineered with laser-cut seams that release stress to eliminate the risk of wobbling. The blade has a diamond-reinforced edge and is designed for fast, chip-free cutting of porcelain, ceramic, marble and granite tile.

  • Circular saw blade
  • Made of steel with a high-grade diamond-powder edge
  • For use on porcelain, ceramic, marble and granite tile
  • Ultra-thin alloy steel core provides smooth cutting with minimum vibration
  • Laser-cut seams release stress and eliminate wobbling

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions7 Answers

Customer Questions & Answers

10 in. Diamond-Edge Tile Circular Saw Blade
10 in. Diamond-Edge Tile Circular Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
5 answers

Will this blade cut pavers?

This question is from 10 in. Diamond-Edge Tile Circular Saw Blade
Asked by
Downingtown, PA
Read all my Q&A
June 11, 2014
Will this blade cut pavers and brick?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Memphis, TN
Read all my Q&A
August 24, 2015
Answer: 
It will cut bricks and natural stone. In fact, we had about 700 bricks cut with this blade and it did the job very well. However, RIDGID has the blade especially designed for bricks/stone/concrete.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 4, 2015
Answer: 
Yes, it will do a fine job initially, but it will wear down quickly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Belton, MO, USA
Read all my Q&A
Home Improvement Profile: Other
December 27, 2014
Answer: 
Yes it will cut pavers, and quite well. I use pavers to dress my blades after several cuts because they help remove metal from the blade and expose new diamond. I recommend using the blade wet
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Houston, TX, USA
Read all my Q&A
September 20, 2014
Answer: 
I would recommend a serrated blade with the same diamond edge that Ridgid sells that will provide a clean smooth cut and edge as well as ease of use with thicker masonry produces such as paver's and bricks.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 16, 2014
Answer: 
No, the 10in Diamond Edge Tile Circular Saw Blade will not cut pavers/bricks. Well, it will but it will have a very short life.
For pavers/bricks, the recommended blade is the Ridgid 10” Segmented Diamond Blade: http://www.homedepot.com/p/RIDGID-10-in-Segmented-Diamond-Blade-HD-SG10CP/202882340?keyword=hd-sg10cp
Thank you,
RIDGID
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

wet or dry?

This question is from 10 in. Diamond-Edge Tile Circular Saw Blade
Asked by
Meadville, Pa.
Read all my Q&A
December 22, 2014
The blade says wet and the specifications say wet or dry
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 4, 2015
Answer: 
Wet. Do not use this as a dry-cut blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Belton, MO, USA
Read all my Q&A
Home Improvement Profile: Other
December 27, 2014
Answer: 
I prefer to use these blades wet. They will cut dry, but you will have dust particles that are very harmful to breath and have to wear a dust mask or respirator. And cutting dry will shorten the blade life considerably
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-10-30 T22:59:32.087-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100606322, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

10 in. Diamond-Edge Tile Circular Saw Blade is rated 2.9 out of 5 by 26.
Rated 4 out of 5 by from Great blade This blade works fine as long as its matched close to the rpm of the saw... I've been using this product for two years now and for the cost it's more than capable in handling any tile job...
Date published: 2016-03-23
Rated 5 out of 5 by from Used with 10" 2.5 HP/15-amp wet saw Long-time renovator. Working with a low-end professional wet saw. After using this blade, it's difficult to understand the repeated bad reviews this product is getting. I have used this thing on 3/8" granite and PEI 5 porcelain tile. Cuts with minimal chipping and wobble, trims tile edges with minimal chipping, cuts into tile with minimum wobble, unlike what I've been reading here. The blade is fast and safe. I may have picked a winner by pure accident off the hook, but I don't think so. I have said all kinds of negative things about products sold by Home Depot when I felt the negativity was due. This blade is a great buy.
Date published: 2015-05-04
Rated 4 out of 5 by from Take it from a contractor. Not as bad as people say. I'm trying to figure out why there are so many horrible reviews with this product. I was reluctant to buy the blade because of the reviews (and I'm not a huge fan of Rigid). Home Depot has a horrible selection of tile blades so i had to buy it due to not having time to go somewhere else to buy a name brand tile blade with a good reputation. However, I used the blade on my MK-101 saw and it cut 16" porcelain tile no problem. The blade does have some flex as do many other blades. As long as you don't force the cut and are using a decent saw, you should have no issues with the blade. I'm not sure about the life of the blade due to the fact that i didn't make a ton of cuts. The price to me is a little high for the brand. Bottom line the blade does its job.
Date published: 2013-12-06
Rated 4 out of 5 by from Nice blade Bought this nice blade to use on a Harbor Freight saw. It makes really nice cuts in porcelain tile and seems like it will outlast the work I need to do with it. I would buy it again.
Date published: 2015-08-11
Rated 4 out of 5 by from Not bad I was skeptical after reading the reviews but I ordered the blade anyway because it was cheaper than Dewalt. Blade worked pretty well for me. Will buy it again.
Date published: 2012-10-19
Rated 5 out of 5 by from glad not to let these reviews stop the purhase Sliced threw 20 inch comet stone on a pearl vx10.2 with no problem. And as good as any pro blade with a jacked up price from the floor stores. Now only used for one day but I ripped some tile for 6 hours straight on a ten year old machine and didn't see any chips. Time will tell but so far will buy again
Date published: 2015-08-01
Rated 4 out of 5 by from all I buy as a mostly full time tile cutter ive used many different blades , this blade never chips my tile , ive read how it chips tile . I think thats because the saws these people are using are worn out .with a decent saw this won't happen .I get a lot of cuts around three tile jobs off of a blade these people either rush the cut or the bearings are worn on their saws , this is a very good blade and it lasts twice as long as any other ive tried
Date published: 2014-01-12
Rated 1 out of 5 by from Blade Wobbles at Begining of Cut Although I am a huge Ridgid fan, Ridgid missed the ball on this one. The blade has relief cuts in it that are suppose to help with blade warping due to temperature differences (which makes no sense because we are talking about a wet blade here that should have a pretty consistent temperature throughout because of the water stream on the blade). These relief cuts make the blade extremely unstable at the beginning of the cut. The blade wobbles and flexes all over the place at the beginning of the cut. Stay away!
Date published: 2011-01-07
  • y_2017, m_1, d_22, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_, sid_100606322, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT