0648846063645

RIDGID

Model R213BNE

Internet #204207188

Store SKU #1000010820

18-Gauge 2-1/8 in. Brad Nailer

$99.00 /each
  • Powerful motor able to drive 2-1/8 in. brad nails into solid oak
  • Dry-fire lockout helps motor life and stops marring work surface
  • ACCU-drive tip design allows for accurate placement of fasteners

Frequently Bought Together

Product Overview

The RIDGID 18-Gauge 2-1/8 in. Brad Nailer features an industry leading feature set with Fasten Edge Technology. It has a selectable trigger that can be set to contact or sequential fire. The magazine allows a wide range of fastener lengths and the internal piston catch delivers consistent driving power. It is designed for clean operation and long life and equipped with no-mar pads that help prevent scuffing or damage to the work surface.

California residents: see   Proposition 65 information

  • Powerful motor able to drive 2-1/8 in. brad nails into solid oak
  • Oil-less motor eliminates daily oiling and oil splattering on the work surface
  • Dry-fire lockout extends motor life and prevents marring work surfaces
  • Jam-clearing mechanism for easy access to clear jams
  • Hex grip enhanced micro-texture for secure grip and maximum user comfort
  • Side load magazine allows for quick and easy nail loading
  • ACCU-drive tip design allows for accurate placement of fasteners at the desired angle
  • Semi-transparent magazine door allows for convenient view of the nail supply
  • No-mar pad keeps work surface clean of tool marks
  • Adjustable rear exhaust with muffler puts the exhaust where you want it without any tools
  • Need help? CLICK HERE to view our Nail Gun Buying Guide
  • Click Here to Register Your Product

    Test Item

  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

27 Questions55 Answers

Customer Questions & Answers

18-Gauge 2-1/8 in. Brad Nailer
18-Gauge 2-1/8 in. Brad Nailer

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 18-Gauge 2-1/8 in. Brad Nailer
 
8 answers

Do you have to own a compressor to make this work?

This question is from 18-Gauge 2-1/8 in. Brad Nailer
Asked by
Hampshire, IL
Read all my Q&A
February 5, 2014
I am totally new to this. I want to install some molding in my house. I do not want to spend a ton of money on tools nor buy a compresor. Will this do the job? Also does the 2 1/8 size dictate the thickness of the trim I can use?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
Florida
Read all my Q&A
Home Improvement Profile: Professional
February 15, 2015
Answer: 
you need a compressor
you could rent one from Home depot.
2 1/8 is the length of the nail not size of trim
if your going to install crown moulding used 16 gauge with 2 in nail
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
Minneapolis
Read all my Q&A
January 11, 2015
Answer: 
You need a compressor to make it work. You might be able to borrow or rent one. The tool is a major time saver.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Utah
Read all my Q&A
Home Improvement Profile: DIYer
December 13, 2014
Answer: 
Own? No. You can always borrow or rent a compressor, but you WILL need air to use this tool.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Alaska
Read all my Q&A
June 3, 2014
Answer: 
This particular one uses a compressor. There are other nailers that are battery operated. The length of the nail does determine the thickness of wood being used on. 2 1/8 is long enough for 95% of all jobs.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
California, USA
Read all my Q&A
May 20, 2014
Answer: 
Definitely need a compressor to use this tool. You may want to get a battery operated nailer like Dewalt or Ryobi. And no, the 2 1/8 size refers to the longest size of NAILS you can use not trim thickness. With this nailer you can use nails ranging from 5/8" up to 2 1/8" nails as long as they are 18 gauge nails (all nails are labeled right on the box what gauge they are, for example the nails for this Read More
Definitely need a compressor to use this tool. You may want to get a battery operated nailer like Dewalt or Ryobi. And no, the 2 1/8 size refers to the longest size of NAILS you can use not trim thickness. With this nailer you can use nails ranging from 5/8" up to 2 1/8" nails as long as they are 18 gauge nails (all nails are labeled right on the box what gauge they are, for example the nails for this nailer would be marked "18GA". So depending on the materials you're using, you have plenty of choices in nail sizes. Read Less
+7points
8out of 9found this answer helpful.
Was this helpful?helpful8unhelpful1

Asked by
Roseville, CA, USA
Read all my Q&A
March 4, 2014
Answer: 
If you want to use this nailer you should buy a decent compressor of at least 80psi to make it work. Also driving a large nail would sometimes made a mark on your molding and you have to fill and sand it to cover. The smaller it gets the less vissible it gives to your molding. Hope this helps. Peace.
+2points
3out of 4found this answer helpful.
Was this helpful?helpful3unhelpful1

Asked by
Arkansas
Read all my Q&A
Home Improvement Profile: DIYer
February 6, 2014
Answer: 
Yes, it does require a small compressor. A 1 gallon compressor (perfect for the brad nailer) can be purchased through Home Depot for $66. I used one like it for several years until I upgraded to a bigger compressor to power my paint sprayer. The compressor can be found here: http://www.homedepot.com/p/Campbell-Hausfeld-1-Gal-Air-Compressor-with-Basic-Inflation-Kit-FP2028/202581673?N=5yc1vZc27hZ12l2
Yes, it does require a small compressor. A 1 gallon compressor (perfect for the brad nailer) can be purchased through Home Depot for $66. I used one like it for several years until I upgraded to a bigger compressor to power my paint sprayer. The compressor can be found here: http://www.homedepot.com/p/Campbell-Hausfeld-1-Gal-Air-Compressor-with-Basic-Inflation-Kit-FP2028/202581673?N=5yc1vZc27hZ12l2
The 2-1/8" refers to the maximum length of the nails that can be used.
Hope this helps! Read Less
+4points
5out of 6found this answer helpful.
Was this helpful?helpful5unhelpful1

Asked by
Anonymous
Orange, Ca.
Home Improvement Profile: Other
February 6, 2014
Answer: 
Hi Melissa, unfortunately this nail gun requires a compressor.
You can rent a nail gun and compressor, however I would want all my trim to be cut and ready to install to save rental money.
There are manufactures that make battery operated nail guns. These do not require a compressor.
Also the 2 1/8" indicates the brad size you can use in the nail gun.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
This question is from 18-Gauge 2-1/8 in. Brad Nailer
 
7 answers

Can a Brad Nail gun use staples?

This question is from 18-Gauge 2-1/8 in. Brad Nailer
Asked by
Read all my Q&A
April 9, 2014
Rigid 1-1/8 brad nail gun
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Florida
Read all my Q&A
Home Improvement Profile: Professional
February 15, 2015
Answer: 
No this gun uses only brad nail
you need a 2 in 1 gun
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Minneapolis
Read all my Q&A
January 11, 2015
Answer: 
No
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
King of Prussia, PA
Read all my Q&A
January 5, 2015
Answer: 
No it cannot do that. The staple gun uses specific crowned two point staples and are wider than in the brad nailer. In certain cases the staples are better, for example if you are putting together lattice or working on picture frrames or furniture. The brad nailer is built specifically for a single shank nail and works better for the trim and light molding.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Utah
Read all my Q&A
Home Improvement Profile: DIYer
December 13, 2014
Answer: 
Not typically. There are "some" guns that will shoot both, but you have to get one made to do it. Most guns won't.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Alaska
Read all my Q&A
June 3, 2014
Answer: 
Not this particular one. Most are designed for one or the other.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California, USA
Read all my Q&A
May 20, 2014
Answer: 
No, not with this one nailer. I have a Dewalt mechanical (non air-operated) stapler that you can use either nails or staples. I did see that Ridgid makes a pneumatic stapler but i didn't bother to see if it also nails.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
Orange, Ca.
Home Improvement Profile: Other
April 10, 2014
Answer: 
Hi Tweety, unfortunately this brad nail gun shoots only brad nails.
There are other nail gun combos, that can shoot a brad nail or a crown staple.
Here is one example. Open the link below to see this model.
http://www.homedepot.com/p/Campbell-Hausfeld-1-1-4-in-2-in-1-Brad-Nailer-Stapler-CHG00100AV/100668720
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from 18-Gauge 2-1/8 in. Brad Nailer
 
4 answers

I am doing a project that calls for 1-1/4" finish nails. Can 1-1/4" brads be used instead?

This question is from 18-Gauge 2-1/8 in. Brad Nailer
Asked by
Featherville, ID 83647, USA
Read all my Q&A
December 29, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Michigan
Read all my Q&A
Home Improvement Profile: DIYer
May 19, 2015
Answer: 
Totally depends on application, required strength of the nails and how big a hole you are willing to leave. In some projects, absolutely. In others, no. Cannot give a certain answer without knowing what you're doing.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Florida
Read all my Q&A
Home Improvement Profile: Professional
February 15, 2015
Answer: 
Depending on what kind of project.
If for some trim yes or woodworking project
but door jam no to small diam.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
troy, al
Read all my Q&A
Home Improvement Profile: Professional
January 22, 2015
Answer: 
Probably , but it depends on how much holding power you need . The 18 gauge brad nails are not as strong as a 15 gauge finish nail, but they do have holding strength to a degree, if well placed.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
January 7, 2015
Answer: 
Thank you for your interest in RIDGID!
Yes, the R213BNE can accept and use 1-1/4” brad nails for finish work.
Regards,
RIDGID
+3points
4out of 5found this answer helpful.
Was this helpful?helpful4unhelpful1
This question is from 18-Gauge 2-1/8 in. Brad Nailer
 
4 answers

can I use it for fancing?

This question is from 18-Gauge 2-1/8 in. Brad Nailer
Asked by
houston tx
Read all my Q&A
February 15, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Florida
Read all my Q&A
Home Improvement Profile: Professional
February 15, 2015
Answer: 
fencing????????/
No you need 16 gauge or finish nailer not brad nail
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Utah
Read all my Q&A
Home Improvement Profile: DIYer
December 13, 2014
Answer: 
It depends on the fencing. If you're working with a thin wood like a lattice, this nailer would work fine, though you'd want to use galvanized nails. If you're talking about normal fencing such as 2x2 pressure treated, then I'd recommend a (larger) framing nailer with ring-shanked nails, or using decking screws instead of nails. It all depends on the size of the project...
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California, USA
Read all my Q&A
May 20, 2014
Answer: 
I believe you can, but because fences may be subjected to high winds, the thickness of the nails used by this nailer may not be thick enough to hold a fence in place. I would recommend using screws or a nail gun with a capacity to use larger nails.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Anonymous
Orange, Ca.
Home Improvement Profile: Other
February 17, 2014
Answer: 
Hi Alice, this is for what I call light work. Since this brad nailer shoots a finishing nail, the diameter of the brad is small and there is no real head on the nail.
You didn't provide much detail on what type of fencing you're planning on doing.
You could use this brad nailer, for making a fence using light weight materials.
Depending on the fence type and materials, you might consider renting a Read More
Hi Alice, this is for what I call light work. Since this brad nailer shoots a finishing nail, the diameter of the brad is small and there is no real head on the nail.
You didn't provide much detail on what type of fencing you're planning on doing.
You could use this brad nailer, for making a fence using light weight materials.
Depending on the fence type and materials, you might consider renting a framing nailer and use 2 inch or 2 3/8 inch galvanized nails. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 3 »
  • 2016-08-29 T15:19:29.437-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204207188, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 81 reviewers.
Rated 5.0 out of 5.0 by Should have bought one 20 years ago Purchased to put on some baseboards and toe molding - worked like a charm. Took a 2 hour job and turned it into a 10 minute one. Some reviews voiced concern that to 2" 18 gauge nail would hold baseboards, but I didn't have any problems. I also used to trim out some columns, so much easier than nailing in with a hammer and having the parts move ever so slightly which leads to caulk job to fill gaps created by slight shifting in parts. I used window glazing compound to fill small nails hole in baseboards, couldn't even see them in oak toe molding so I left alone. May 17, 2016
Rated 4.0 out of 5.0 by Brad nailer Good brad nailer but a little on the expensive side, however it does come with a lifetime warranty so we shall see if it was worth the extra price. August 2, 2016
Rated 4.0 out of 5.0 by Shot a couple hundred nails with it this weekend... Used this for putting up trim this week. I worked great. Shot nails through oak baseboards and shoe molding with no problems. These are the lightest guns available A couple of nit picky things... 1) Unless you get the protective tip perfectly square to your piece, the gun won't fire. This is probably good in most circumstances but made it tough on round surfaces like the shoe molding. 2) will not shoot the last 4 nails July 27, 2016
Rated 5.0 out of 5.0 by Highly recommend this brad nailer for moulding It is ready for work right out of the box. 2" brads driven into window trim were effortless. The swivel air chuck makes work even easier. July 19, 2016
Rated 5.0 out of 5.0 by Good solid product Easy to load - works great - i am very happy with this brad nailer June 28, 2016
Rated 5.0 out of 5.0 by This little guy works great After 15 years my Bostitch brad nailer finally crapped out. It was good but I like the price and warranty on Rikdgids brad nailer. I have other Ridgid equipment and love them so I decided to go with Ridgid. So far it's worked great. July 6, 2016
Rated 4.0 out of 5.0 by Great Nailer Great nailer. Used it the other day for some trim and small mouldings. Very powerful shot, all nails shot were buried nicely. The only con so far would be the size of the safety/depth gauge. When nailing small mouldings positioning the nailer can be slightly challenging. Overall a great product June 2, 2016
Rated 5.0 out of 5.0 by Are you kidding me? So far, my $100 investment allowed me to trim out 100+ windows and hundreds of square feet of base moldings, without one single jam or misfire. Many great features aside from the durability and performance. Add in the LSA and you really can't go wrong. June 3, 2016
  • 2016-08-29 T16:26:33.032-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_81, tr_81
  • loc_en_US, sid_204207188, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • REVIEWS, PRODUCT