Model # HD-AWD40

Internet #202884364

Store SKU #140029

RIDGID 4 in. Double Row Diamond Cup Wheel
0850650001748

RIDGID

4 in. Double Row Diamond Cup Wheel

  • Works for wet and dry applications
  • Delivers 15,000 RPM
  • Ideal for leveling, removing coating and grinding concrete
$39.97 /each

Frequently Bought Together

Product Overview

Use the RIDGID 4 in. Double Row Diamond Cup Wheel for leveling, removing coating and grinding concrete. This wheel's double-row segment design provides aggressive grinding. This wheel fits small angle grinders and is suitable for both dry and wet use.

  • For small angle grinders
  • 5/8 in. - 11 mm threaded arbor
  • Double-row segment design for aggressive grinding
  • Suitable for leveling, removing coating and grinding concrete
  • 15,000 RPM maximum

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

24 Questions72 Answers

Customer Questions & Answers

4 in. Double Row Diamond Cup Wheel
4 in. Double Row Diamond Cup Wheel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
12 answers

Can I wet grind concrete with the Rigid diamond cup wheel?

This question is from 4 in. Double Row Diamond Cup Wheel
Asked by
MT
Tijeras
November 9, 2012
I need to grind down a hump in my concrete floor and want to minimize dust.
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (12)

Asked by
South Weber, UT
Read all my Q&A
January 16, 2016
Answer: 
Works great with water. I suggest working small areas and stand a few 2x6 blocks around the area you are working to contain the wet muddy spray. This worked great for me and made cleanup a lot easier
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Miami, Fl
Read all my Q&A
Home Improvement Profile: DIYer
June 11, 2015
Answer: 
Yes. Wet is the best way. You have to keep wetting it though, once you grind through the wet layer, it's dry underneath. Keep a small bucket of water handy. Be prepared for a mess.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Wethersfield, CT
Read all my Q&A
May 2, 2015
Answer: 
I used it grind wet and it did it worked.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Ga
Read all my Q&A
Home Improvement Profile: Professional
April 29, 2015
Answer: 
Yes you can. Although doesn't work as good on epoxy paint when wet. but concrete itself should be good to go.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California
Read all my Q&A
April 17, 2015
Answer: 
Yes you can, no problem at all.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
American Fork, Utah
Read all my Q&A
October 28, 2014
Answer: 
I wet ground my whole 60ft of concrete countertops. it worked great, but must be very carful if you are using an electric grinder.
User submitted photo
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Plainfield, IL
Read all my Q&A
September 16, 2014
Answer: 
Yes, and I would recommend you do. The dry grinding is extremely messy!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Williamston, MI
Read all my Q&A
July 29, 2014
Answer: 
No, it will throw concrete mud all over you and the grinder and possibly electrocute you.
-12points
1out of 14found this answer helpful.
Was this helpful?helpful1unhelpful13

Asked by
Woodstock, ON, Canada
Read all my Q&A
January 30, 2014
Answer: 
Yes you can just add water while you grind but in a way that water doesn't get the grinder all wet be carefull.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Woodstock, GA
Read all my Q&A
July 2, 2013
Answer: 
Yes, you can grind concrete wet with this wheel. Just make sure the water isn't puddling as it is hard to tell what you are working on....
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Lakeland, FL, USA
Read all my Q&A
April 30, 2013
Answer: 
Yes, it works wet or dry
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
November 14, 2012
Answer: 
Please contact Jore Corp at # 888-809-5673. This is not a product we support.
-10points
2out of 14found this answer helpful.
Was this helpful?helpful2unhelpful12
 
10 answers

Can I use a 4" grinding wheel on a grinder designed for 4.5" wheels?

This question is from 4 in. Double Row Diamond Cup Wheel
Asked by
St. Louis
Read all my Q&A
June 29, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (10)

Asked by
NH
Read all my Q&A
October 14, 2016
Answer: 
Yes, you just don't want to use wheels that are bigger than intended for your grinder.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Rancho Palos Verdes, CA
Read all my Q&A
Home Improvement Profile: DIYer
October 4, 2016
Answer: 
Yes, it should be fine. I used it with my Makita 4.5 with great success.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Portland Or
Read all my Q&A
Home Improvement Profile: Professional
September 1, 2016
Answer: 
Yes, so long as your 4 inch grinder accepts discs with a 5/8 inch arbor.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nashotah, WI
Read all my Q&A
September 26, 2015
Answer: 
Yes.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
West Palm Beach
Read all my Q&A
May 12, 2015
Answer: 
Yes it will fit a 4.5 in grinder
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Ga
Read all my Q&A
April 29, 2015
Answer: 
You should be fine as long as the wheel meets rpm requirements.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
California
Read all my Q&A
April 17, 2015
Answer: 
Yes, as long as your grinding wheel can be mounted securely like your 4.5"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Plainfield, IL
Read all my Q&A
September 16, 2014
Answer: 
Yes you can. I used a 4" cement grinder on my Dewalt grinder with no issues.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Williamston, MI
Read all my Q&A
July 29, 2014
Answer: 
Yes with no problems. Just doesn't have as much surface area to work with.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
July 2, 2014
Answer: 
Thank you for your interest in RIDGID!
It is not recommended to use a smaller wheel on the grinder. We hope this helps!
Regards,
RIDGID
-8points
1out of 10found this answer helpful.
Was this helpful?helpful1unhelpful9
 
5 answers

Can I attach this to a cordless drill?

This question is from 4 in. Double Row Diamond Cup Wheel
Asked by
Santa Monica, CA
Read all my Q&A
August 16, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
NH
Read all my Q&A
October 14, 2016
Answer: 
I wouldn't think this would work well because a drill isn't fast enough. I think the wheel would be very difficult to control. Also you'd need to find some sort of arbor to adapt the 5/8"-11 thread to your drill chuck.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Rancho Palos Verdes, CA
Read all my Q&A
Home Improvement Profile: DIYer
October 4, 2016
Answer: 
No. This is made for an angle grinder that has the correct fitting and much higher RPM than a drill.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Port St. Lucie, FL, USA
Read all my Q&A
Home Improvement Profile: DIYer
August 17, 2016
Answer: 
This has a threaded arbor for a for a grinder. If an arbor/adapter to fit a drill was available (I am not aware of any currently available) it still would not be a good idea because the ergonomics differ so drastically between a drill and a grinder, it would be extremely difficulty to control safely and efficiently.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
VA
Read all my Q&A
August 17, 2016
Answer: 
It is not meant for a cordless drill. Do you have an adapter? The center hole is threaded for a 5/8 grinder so you would need some type of adapter to screw it on to. Also, the rpms on a cordless drill will be less than a grinder but could still do light weight jobs I suppose. You can get a grinder from Home depot for $20... the adapter would probably cost you at least half that, if you could find one.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 16, 2016
Answer: 
No, this item can only be attached to angle grinders.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
5 answers

What is the minimum rpm's for this product?

This question is from 4 in. Double Row Diamond Cup Wheel
April 19, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

October 14, 2016
Answer: 
I'm not totally sure but I'd say you'd want around half what my grinder does minimum.. so around 7,000.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nashotah, WI
Read all my Q&A
September 26, 2015
Answer: 
The RPM rating doesn't have a minimum, because the slower you go, the less stress you put on it. However, if you're going very slow (say, sub 5,000 RPMs), your work is going to take a LOT longer. It worked well for me at 12,000 RPMs. I'd say you want to be at 10,000+ for best results. This attachment is designed to take a little bit off at a time, but at a very high rate.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
West Palm Beach
Read all my Q&A
May 12, 2015
Answer: 
For this product to work I recommend a minimum speed of 4000 rpm
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Ga
Read all my Q&A
Home Improvement Profile: Professional
April 29, 2015
Answer: 
Which grinder do you have? I used the Ryobi 4.5'' grinder and handled it pretty well.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
April 21, 2015
Answer: 
Thank you for your interest in RIDGID!
There is not a minimum RPM, it really depends on the machine being used. But for safety purposes, product is rated for max RPM 13,000.
Regards,
RIDGID
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4
2 »
  • 2016-10-31 T01:57:24.252-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202884364, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 185ms
  • QUESTIONS, PRODUCT

Customer Reviews

4 in. Double Row Diamond Cup Wheel is rated 4.7 out of 5 by 61.
Rated 5 out of 5 by from Exceptional Quality for the Price Decided to replace the carpet in the house with stained concrete slab. After pulling up the carpet edge battens, lots of nail divots that I had to fill, then grind level. Had a Makita 4.5" angle grinder, fitted this cup wheel to it, and it has performed for two days straight like a champ. (Was so impressed I went ahead and bought a 7" Ridgid Grinder and 7" wheel to do the "big stuff" out in the middle of the floor. Review of those upcoming).
Date published: 2016-09-11
Rated 5 out of 5 by from Very impressed I tried this grinding wheel for the first time. I'm very impressed by the durability and speed at which it cuts. I used for about three hours to level some stucco and there is at least 1/2 the grinding pad thickness left.
Date published: 2016-10-04
Rated 5 out of 5 by from Used this to remove the glue from my wood floor and to level the concrete. It worked great! After... Used this to remove the glue from my wood floor and to level the concrete. It worked great! After clearing the entire floor, the wheel looked and worked like Tim was new.
Date published: 2016-10-25
Rated 5 out of 5 by from I was pleasantly surprised at how well this worked and the speed at which it can grind a concrete... I was pleasantly surprised at how well this worked and the speed at which it can grind a concrete surface. First application was to grind a 4 foot long heave crack in a concrete floor in preparation for repair and resurfacing. I was able to grind the length of the crack smooth in just a few minutes and will little effort. The blade didn't catch or bind. Next a brick threshold was smoothed for repair and covering. The wheel easily ground the brick in a very controlled way without cracking or knocking off big chunks. Next I used the wheel to remove paint on a concrete threshold. Worked very easily and quick. It was also very good at removing lumpy residue from a concrete bathroom floor after vinyl flooring was pulled up. Takes more time to remove sticky residue but was still very effective. I don't know how long this will last, but it already saved me a bunch of time and effort so well worth the investment. I was skeptical but this worked better than I had expected. Wear goggles, ear protection, and a good dust mask! Silica dust is very bad to inhale. You might want to consider wearing a disposable Tyvek overall suit too. Otherwise you will be covered in dust.
Date published: 2017-01-02
Rated 5 out of 5 by from works great, ground down 4.5x36 3/8 down on old concrete. went very easy, lots of blade left works great, ground down 4.5x36 3/8 down on old concrete. went very easy, lots of blade left
Date published: 2017-01-05
Rated 5 out of 5 by from I misused cement with risen gravel and my wheel ground my cement into a flat surface I misused cement with risen gravel and my wheel ground my cement into a flat surface
Date published: 2016-11-25
Rated 5 out of 5 by from Good quality Very durable and very easy tu use on diferest surfeces and versatulity for the siza
Date published: 2016-12-06
Rated 4 out of 5 by from good item used and worked well for the project on a shower concrete floor
Date published: 2016-07-27
  • y_2017, m_1, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_60
  • loc_, sid_202884364, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 123ms
  • REVIEWS, PRODUCT